Bowers and Wilkins BW Stand Brochure

Stand Information

24” metal spiked stand for 805S

Black or brushed aluminum nish

Designed to match the 805S, this elegant matching

oor stand raises the speaker to the correct

listening height and provides a stable, rigid support.

Catering to all circumstances, there is a choice of

upward facing spikes, screws or reusable adhesive

to attach the speaker. Floor spikes are included.

Available in all black or silver with grey base and

top, the column incorporates a cable conduit and

may be lled with sand to add mass and damping.

12” metal spiked center channel
stand for HTM2D, HTM3S, or HTM4S

Black or brushed aluminum nish

The metal spiked stand for the HTM2D,

HTM3S, and HTM4S supports the speaker

at a height low enough to allow the use of

large projector screens that come to within 2

feet of the oor and has zero, 4 or 8 degrees

of tilt-back so that the speaker can be

directed towards the listeners.

Available in all black or silver with grey base

and top. Floor spikes and screws to attach

the speaker are included.

24” metal spiked stand for 705

Black or brushed aluminum nish

Designed for the 705 speaker, but also suitable for

other speakers of similar size, this elegant matching

oor stand raises the speakers to the correct listening

height and provides a stable, rigid support.

The heavy, cast iron base ensures stability and the

extruded aluminium columns may be lled with sand

to add mass and damping. One of the columns also

incorporates a cable conduit.

The stand is available either in all black or with

silver columns and grey base and top. Floor spikes

and screws to attach the speaker to the stand are

included.

24” metal spiked stand for DM600 and
DM601

Black nish

Universal 24” tall design. The vertical metal columns

can be lled with sand to dampen resonances and

the base comes with screw-in adjustable spikes

to further reduce resonance and enhance stability.

Available in black painted nish only.

24” metal spiked stand for CM1

Black or brushed aluminum nish

The stylish matching oor stand for the CM1

elevates the speaker to the appropriate listening

height and provides steady support. The base is

made of cast iron, guaranteeing solidity. To add

mass, the aluminum columns may be packed with

sand. A cable conduit is included in one of the

columns.

The stand comes either solid black or with silver

columns and grey base and top. Floor spikes and

screws to attach the speaker to the stand come

standard.

20” metal spiked stand for DM602

Black nish

The DM602 stand is identical in design to the

DM601 stand except it is 20” tall and is the

perfect complement for the DM602, as well as

other tall bookshelf speakers. Available in black

painted nish only.

16” center channel stand for LCR60 and LCR600

Black nish

The LCRS stand for center channels LCR60 and LCR600 is a 16” tall design.

The vertical metal columns can be lled with sand to dampen resonances

and the base comes with screw-in adjustable spikes to further reduce

resonance and enhance stability. Available in black painted nish only.

28” metal stand for XT2

Satin polished aluminum nish

38” oor stand for M-1

Brushed aluminum nish

With its sophisticated aluminum column and solid

heavy base, the FS-XT oor-stand is a perfect

compliment to the XT2 monitor. With the XT2

mounted on the oorstand, the monitor provides

genuine compact and critical performance - with

the unique benet of a contemporary and stylish

satin polished aluminum aesthetic.

31” oor stand for LM1

Brushed aluminum or black nish

Designed specically for the LM1, the stand

raises the speaker to the correct listening

height and allows it to be angled in both

horizontal and vertical planes.

The notable base is tted with adjustable feet

to cater for uneven oors and the supporting

pillar xes directly to the speaker in place of the

original base.

The M-1 stand is an option where wall or shelf

mounting is not required. The M-1’s innovative

cable management system really comes into its

own when used with the oor stand. Cable enters

via the stand (or table plinth or wall bracket) and

the electrical signal is conducted to the speaker

through the metal ‘arm’ that supports it. The arm

itself forms the negative conductor, and a single,

insulated wire running inside it provides the

positive one.

46” Floor stand for VM1

Brushed aluminum nish

With its elegant extruded aluminium stem and

weighty cast iron base, this oor stand is the

perfect partner to the VM1, raising it to the

correct listening height. The speaker simply

slots into the top of the stem, which also serves

to hide the cable tidily. Even the terminals are

covered from view.

Available with clear lacquered aluminum stem

and dark grey base and trim, the stands are

supplied in pairs.

Floor stand for FPM4 and FPM5

Silver nish

This matching oorstand offers a solid,

elegant mount, and allows cables to be

concealed in a channel at the rear.

Vertical mount only.

Table mount stand for FPM2, FPM4,
FPM5 and FPM6

Silver nish

Thanks to this specially designed stand FPMs

can sit happily on a tabletop alongside or below

an LCD TV.

Vertical or horizontal mounting.

Floor stand for FPM6

Silver nish

This stand raises the FPM6 to the correct

listening height and allows for positioning

anywhere in a room as rear speakers for home

cinema, or in hi- applications. Cables are

concealed in a channel at the rear. Vertical

mount only.

FPM Table Stand Dimensions

Speaker Mount Height w/ speaker

FPM2 horizontal 10.25”

FPM4 vertical 24.5”

FPM4 horizontal 10.25

FPM5 vertical 28.5”

FPM5 horizontal 10.25”

FPM6 vertical 32.75”

FPM6 horizontal 10.75”

Stand Specications

Model Order Code Height Height w/

Speaker

805

Black: N85SB

23.4” 39.9” 11” 14.7” 18 lbs.

Br. Alum.: N85SA

705

Black: 705SB

23.4” 40” 10.9” 14.5” 22 lbs.

Br. Alum.: 705SA

CM1

Black: CM1SB

23.4” 34.4” 10.9” 14.5” 22 lbs.

Br. Alum.: CM1SA

XT2

DM600, DM601

FSXT 27.6” 39.9” 11.4” 11.4” 22 lbs.

D61S 24” 35.3”

38.4”

DM602

HTM2D,

HTM3S,

HTM4S

LCR60, LCR600

D62S 20” 39.3” 9.5” 11.75” 20 lbs.

Black: HTMBS
Br. Alum.: HTMSS

11.6” 24.6”

24.2”

22.6”

LCRS 16” 22.9”

24”

M1

M1SA 37.7” 42.7” 9.9” 9.9” 12.8 lbs.

Width Depth Weight

9.5” 11.75” 18 lbs.

20.5” 12.3” 29.3 lbs.

9.5” 12” 17 lbs.

LM1

VM1

FPM
Table Stand

FPM4,

FPM5

FPM6

B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 2BH England

T [phone]
F [phone]
[e-mail]
www.bwspeakers.com

Black: LM1SB

31” 41.2” 7.7” 10.2” 65 lbs.

Br. Alum: LM1SA

VM1SA 45.5” 50” 9.9” 9.9” 8.3 lbs.

FPMDS 8” see

8.25” 7.1” 16 lbs.

description

FPMFS 42.5” 47.75”

10.25” 8.75” 40 lbs.

51.5”

FPM6FS 39.75” 51.75” 10.25” 8.75” 39 lbs.

UK Group (UK Sales)

T [phone]

E [e-mail]

B&W Group North America
T [phone]

E [e-mail]

B&W Group Asia Ltd
T [phone]

E [e-mail]