Bowers and Wilkins ASWCDM Brochure
ASW CDM
Active Subwoofer
Product Summary
Description Active closed-box subwoofer system
Drive units 300mm (12 in) paper/Kevlar® cone
long-throw
Frequency range -6dB at 15Hz and 40/140Hz adjustable
(EQ at A)
Frequency response ±3dB 20Hz - 31/110Hz adjustable
(EQ at A)
Amplifier Power output: 1000W continuous
Input impedance: 33kohm
Signal / noise: >90dB
Functions: Output level
Low-pass filter frequency
Low-pass filter bypass
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Outputs: Line Out (RCA Phono) high-passed
Link Out (RCA Phono)
Low-pass filter Active 2nd-order, variable cut-off frequency
High-pass filter Active 3rd-order -6dB at 80Hz
Dimensions Height: 392mm not including feet
Width: 396mm
Depth: 490mm including grille and controls
Net weight 32.5kg
Finishes Black Ash, Cherrywood and Red Stained
Cherrywood Real wood veneers
Grille Black cloth
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
The ASW CDM combines a sophisticated 300mm (12 in) driver and 1kW ampilfier.
With styling to match the CDM NT range and available in the same finishes it
complements any CDM installation.
This versatile subwoofer is compact enough not to physically dominate the smaller
room, but powerful enough to fill the larger room with powerful, deep bass from
either music or movie based sources.
The rugged 300mm (12 in) driver, with its composite paper-Kevlar® cone, large
magnet and high-power voice coil, can move large volumes of air with exquisite
control for accurate low-frequency output.
To ensure the driver can perform in the relatively compact cabinet, the subwoofer
features a powerful 1kW amplifier to apply the necessary equalisation. Equipped
with audiophile full-range Class-D circuitry and a switch mode power supply, the
amplifier is extremely efficient and operates reliably cool
Loading...