Bounty Hunter VLF, VLF TREASURE DETECTOR Owner's Manual

VLF
treasure
detector

Owner ’s Manual

VLF TREASURE DETECTOR

Owner’s Manual

I. ASSEMBLY:

To assemble your VLF Treasure Detector,
follow this simple procedure:

1) Unpack your detector and find the following parts:

• Detector Body with armrest, search coil and attached coil knob.

• Upper Stem (thicker silver rod with many holes)

• Lower Stem (thinner silver rod with plastic extension and button)

• Two (2) stem attachment knobs (in the plastic bag)

I. ASSEMBLY: (continued)

2) Attach the Upper Stem to the back of the

detector body with the two knobs supplied.

3) Depress the button on the lower stem and
push the lower stem into the upper stem.

4) Wind the search coil cable around the
two-piece stem.

5) Leave some slack
in the cable as
you reach the
end of the lower
stem.

6) Attach the coil to
the lower stem
using the attached
coil knob.

7) Install two (2) 9-volt
ALKALINE batteries (not

supplied). There are two
battery doors on the back of
the detector body.

IMPORTANT: Use 9-volt ALKALINE

batteries ONLY.