Bounty Hunter Pilot Owner's Manual

OWNER’S MANUAL
The Pilot is an easy to use detector. The most difficult aspects of metal detecting have been automated.
However if you are new to the hobby, we strongly recommend that you:
3/4 sensitivity; increase to full sensitivity after you have become familiar with the detector.
2) Do not use indoors. This detector is for outdoor use only. Many household appliances emit electromagnetic energy, which can interfere with the detector. If conducting an indoor demonstration, turn the sensitivity down and keep the search coil away from appliances such as computers, televisions and microwave ovens. If your detector beeps erratically, turn off appliances and lights.
Also keep the search coil away from objects containing metal, such as
floors and walls.
3) Read this manual. Most importantly, review the Quick-Start Demo
(p.6) and Basic Operation (p. 8-12).
4)
Use 9-volt ALKALINE batteries only. Do not use Heavy Duty or ordinary Zinc-carbon Batteries.
TREASURE HUNTER’S CODE OF ETHICS:
• Always check Federal, State, County and local laws before searching.
• Respect private property and do not enter private property without the owner’s permission.
• Take care to refill all holes and leave no damage.
• Remove and dispose of any and all trash and litter found.
• Appreciate and protect our inheritance of natural resources, wildlife and private property.
• Act as an ambassador for the hobby, use thoughtfulness, consideration and courtesy at all times.
• Never destroy historical or archaeological treasures.
• All treasure hunters may be judged by the example you set; always conduct yourself with courtesy and consideration of others
FIRST TEXAS PRODUCTS, LLC
5-YEAR LIMITED WARRANTY
According to FCC part 15.21 Changes or Modifications made to this device not expressly approved by
the party responsible for compliance could void the users authority to operate this equipment.
This device complies with FCC Part 15 Subpart B Section 15.109 Class B.
Copyright ©2012 by First Texas Products, L.L.C.
All rights reserved, including the right to reproduce this book, or parts thereof, in any form, except for the
inclusion of brief quotations in a review.
Published by First Texas Products, L.L.C.
Bounty Hunter® is a registered trademark of First Texas Products, L.L.C.
www.detecting.com
First Texas Products L.L.C.
1465-H Henry Brennan • El Paso, TX 79936 • (915) 633-8354
The Bounty Hunter Pilot is warranted against defects in
workmanship or materials under normal use for five years from
date of purchase to the original user. Liability in all events is
limited to the purchase price paid. Liability under this Warranty is
limited to replacing or repairing, at our option, any Bounty Hunter
Detector returned, shipping cost prepaid, to First Texas Products,
LLC. Damage due to neglect, accidental damage or misuse of this
product is not covered by this warranty.
Proof of purchase is required to make a claim under this warranty.
NOTE TO CUSTOMERS OUTSIDE THE U.S.A.
This warranty may vary in other countries, check with your distributor for details.
Warranty does not cover shipping costs
MPILOT Rev.2 120512
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Assembly
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Batteries
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Quick-Start Demo
. . . . . . . . . . . . . . . . . . . . . .6-7
Basic Operation
Powering Up . . . . . . . . . . . . . . . . . . . . . . . .8
The Display . . . . . . . . . . . . . . . . . . . . . .8-10
Operating Controls . . . . . . . . . . . . . . . . . . . . . .11
Environmental Conditions . . . . . . . . . . . . . . . .12
Audio Target Identification
. . . . . . . . . . . . . . .13
Depth Select (Sensitivity Adjustment) . . . . . . .14
In The Field Techniques
. . . . . . . . . . . . . . .15-17
Headphones
. . . . . . . . . . . . . . . . . . . . . . . . . . .17
Trouble Shooting
. . . . . . . . . . . . . . . . . . . . . . .18
Metal Detecting Applications . . . . . . . . . . . . . .19
Treasure Hunter’s Code of Ethics
. . . .Back Cover
Warranty
. . . . . . . . . . . . . . . . . . . . . . .Back Cover
The BOUNTY HUNTER PILOT series of metal detectors is not
2
TABLE OF CONTENTS
19
METAL DETECTING APPLICATIONS
COIN SHOOTING:
The most popular metal detecting activity. Find coins where people congregate frequently. Many detectorists revisit the same areas again and again to find a never-ending treasure trove as people continue to lose valuables every day. Parks, fairgrounds, and play ares are good choices. The most valuable old coins are frequently found in abandoned home sites, or if you live on an older property, maybe in your own backyard.
Control settings required. Target-Rejected al least 2-Xs to eliminate iron, foil, and old pull tabs. Target-Rejected all 3-Xs if you want to find only copper and silver. If you search for nickels, remember that you will also encounter some newer pull-tabs. Some newer pull-tabs have a magnetic signal indistinguishable from nickel.
RELIC HUNTING:
The most effective relic hunting is best accomplished after conducting historical research. Visit your local library, or check the internet, for historical events in your area. You can target specific areas and gain valuable insight into your local history. Remember to ask permission and respect laws regarding private and government property.
Control settings required. No X’s should be displayed. Do not discriminate out any types of metals as many of the oldest relics contain iron.
JEWELRY HUNTING:
This is the most challenging treasure hunt. Gold rings will register in the same range as pull-tabs. Necklaces will register with zinc and foils. You will dig up many trash items in your search for jewelry, but jewelry hunting holds the most potential for reward. Please pick up ant throw away those pull-tabs to help clean the environment.
Control settings required. Target-Reject only the 1st X; eliminate IRON only.
JEWELRY HUNTING:
A cache, pronounced “cash,” is a buried or hidden valuable stored inside a case, can, strong gox, or bag. A cache could be the loot from a bank robbery or someone’s life savings. Caches can be hidden in floors or walls of an old house, or buried nearby.
Control settings required. No X’s should be display. The container holding the treasure will frequently be a ferrous object, so you want to detect all types of metal objects.
3
TERMINOLOGY
The following terms are used throughout the manual, and are standard terminology among detectorists.
ELIMINATION
Reference to a metal being "eliminated" means that the detector will not emit a tone, nor light up an indicator, when a specified object passes through the coil’s detection field.
DISCRIMINATION
When the detector emits different tones for different types of metals, and when the detector "eliminates" certain metals, we refer to this as the detector "discriminating" among different types of metals. Discrimination is an important feature of professional metal detectors. Discrimination allows the user to ignore trash and otherwise undesirable objects.
RELIC
A relic is an object of interest by reason of its age or its association with the past. Many relics are made of iron, but can also be made of bronze or precious metals.
IRON
Iron is a common, low-grade metal that is an undesirable target in certain metal detecting applications. Examples of undesirable iron objects are old cans, pipes, bolts, and nails. Sometimes, the desired target is made of iron. Property markers, for instance, contain iron. Valuable relics can also be composed of iron; cannon balls, old armaments, and parts of old structures and vehicles can also be composed of iron.
FERROUS
Metals which are made of, or contain, iron.
PINPOINTING
Pinpointing is the process of finding the exact location of a buried object. Long-buried metals can appear exactly like the surrounding soil, and can therefore be very hard to isolate from the soil.
PULL-TABS
Discarded pull-tabs from beverage containers are the most bothersome trash items for treasure hunters. They come in many different shapes and sizes. Pull-tabs can be discriminated, but some other valuable objects can have a magnetic signature similar to pull-tabs, and will also be eliminated when discriminating out pull-tabs.
GROUND BALANCE
Ground Balancing is the ability of the detector to ignore, or "see through," the earth’s naturally occurring minerals, and only sound a tone when a metal object is detected.
18
TROUBLE SHOOTING GUIDE
SYMPTOM CAUSE SOLUTION
Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only
• Using detector near • Move away power lines
from power lines
• Using 2 detectors in • Keep 2 detectors close proximity at least 20’ apart
• Highly oxidized • Only dig up buried object repeatable
signals
• Environmental
Reduce sensitivity electromagnetic until erratic interference signals cease
Constant low tone
Discharged batteries
• Replace batteries
or
constant repeating
tones
• Wrong type of • Use only 9V
batteries alkaline batteries
LCD does not lock • Multiple targets
Move coil slowly
on to one target ID present at different angles or detector emits • Highly oxidized multiple tones target
• Sensitivity set • Reduce sensitivity too high
No power, no • Dead batteries • Replace batteries sounds • Cord not connected •
Check connections
securely
TROUBLE SHOOTING
Loading...
+ 7 hidden pages