Your PrecisionTM
Remote Control is
designed to check
the battery level of
your stimulator and
help you control your
stimulation settings
to best suit your
individual needs.
And it's easy to use!
Page 3
An overview
Remote Control
USB power supply
Home
Programs
Decrease
Stimulation
on/off
Navigation
Lock/Unlock
Screen
Increase
+
3
Page 4
How can I start or stop stimulation?
•
To get started, press and hold the
”unlock” button on the right-hand
side of your remote, until the text
”Release Side Button to Unlock”
appears on the screen.
•
Now you can turn stimulation on by
pressing the red button in the center of
your remote.
•
To turn stimulation off, simply press the
red button again.
4
Page 5
How can I increase or decrease
stimulation?
If your doctor allows you to change your stimulation level,
this is easily done on your remote:
•
You can then use the “plus” or “minus”
buttons beside the on/off button to
adjust your stimulation to the right level
for you.
5
Page 6
How can I access or change
stimulation programs?
If your doctor has set up different stimulation programs for you,
you can access these in just a few clicks:
Either:
•
press the “Programs” button on the
left side of your remote.
6
Page 7
Or:
•
Click the right-hand arrow to see the
main menu.
•
Click the right-hand arrow a second
time to enter the “Programs” menu.
•
Click the right-hand arrow a third time
to enter the “Change Program” menu.
•
From there you can navigate through the
different programs with the up and
down arrows.
•
Select your desired program by clicking
on the right hand arrow
one last time.
7
Page 8
How do I know the
stimulation program
and intensity is
right for me?
If your remote offers you different stimulation
programs, it’s important to talk to your doctor
about which programs are best for which
symptoms. That way you can pick the right
program for your needs.
•
If your doctor allows you to change the
stimulation intensity, you should be able
to tell which level is right for you based
on the improvement in symptoms
you feel.
•
If you feel any side effects, make sure to
stop increasing stimulation intensity.
8
Page 9
How can I charge
my remote?
•
To charge your remote, simply
connect it to the USB power
supply and plug into a plug
socket.
•
Whenever the remote is low
on battery, it will show you a
reminder to recharge.
9
Page 10
Using your PrecisionTM
Remote Control
Top Tips
•
Make sure your remote can communicate properly with your
stimulator: If your stimulator doesn’t respond to the remote, try
moving the remote closer. Remember too that the stimulator
cannot communicate with the remote while charging.
•
Don’t worry if your remote screen goes blank after around a
minute of inactivity: The remote is entering into sleep mode so
as to save battery.
•
Keep up to date via your remote’s
Home screen: The Home screen shows
you the name of the stimulation pro-
gram currently running as well as the
level of stimulation strength. It also
shows you the remote’s battery level
and whether stimulation is on or off.
10
Page 11
Page 12
This document is not intended as a substitute for the Precision Novi™,
Precision Montage™ or Precision Spectra™ System Patient Manuals.
The contents of the handbook must be carefully read and fully understood
before using your Precision™ Remote Control. If you have any questions,
or need clarification on anything contained in this manual, please contact
your physician.
All cited trademarks are the property of their respective owners. CAUTION: The law restricts
these devices to sale by or on the order of a physician. Indications, contraindications, warnings
and instructions for use can be found in the product labelling supplied with each device.
Information for the use only in countries with applicable health authority product registrations.
Material not intended for use in France. Information contained herein is for distribution outside the U.S. only. Illustrations for information purposes – not indicative of actual size
or clinical outcome.