Boston acoustics G110 PRODUCT, G112 PRODUCT BROCHURE

Key System Benefits

3

•1

⁄4-inches of peak-to-peak
excursion for deep, accurate,
and powerful bass

• 2-inch, 4-layer voice coil

®

• Patented RadialVent

cooling, for

increased power handling

™

• SureSet

impedance selection

system and overdrive protection

Key Installation Benefits

Value Driven Performance

• Optimized for small, sealed
enclosures. Like the G5 and G2,
only 1.0ft.3is required for the
12-inch, and 0.5ft.3for the 10-inch

• Slim chassis design allows G1 to
fit where others cannot such as
truck boxes and slim enclosures

• Integral sealing gaskets simplify
both standard and inverted mounting

• Multiple enclosure types and
tuning options make it possible
for G1 woofers to be tailored
to any application

Introducing the newest member of the Boston Acoustics subwoofer family—the G1.
G1 woofers sport a 2-inch, 4-Layer voice coil, patented RadialVent®cooling, and unique
SureSet™impedance selection/overdrive protection; features that not only allow the
woofer to handle more power but also add a level of reliability not available from
competitors at any price point. Like all Boston subwoofers, G1 uses an extremely
efficient design allowing for high output with small to moderate power amplifiers. Most
importantly

, with a depth of only 4 3⁄4-inches for the 10-inch and 5-inches for the 12-inch,
its shallow design helps G1 fit where other woofers won't, such as truck boxes. Add in
stunning design, high-end features like spring loaded terminals, and the flexibility to
work with multiple enclosure types and you have a subwoofer that redefines entry level.

ingle or dual 4-ohm voice coil versions

S

G1 subwoofers are available in both single 4-ohm or dual 4-ohm
versions, allowing the user to optimize the impedance load to the
amplifier, regardless of the number of subwoofers used in the system.

2-inch voice coil

The G1 uses a 2-inch, four-layer voice coil for great power handling,

ncommonly large for its price point.

u

Patented RadialVent®cooling

Integrated vents and the woofer’s own pistonic action re-circulate fresh cooling air
around the woofer voice coil. As a result, it can handle more power.

SureSet

™

Using mini ATC fuses, the SureSet™system allows for simple
impedance selection (dual 4-ohm only) as well as momentary
overdrive protection.

Rugged input terminals

Spring loaded input terminals accept bare 8-gauge wire or
pin connectors.

G1 Subwoofer Specifications

Mounting RMS Power Frequency Enclosure Enclosure

Model Size Impedance Depth Handling Response* Size (Sealed) Size (Ported)

G112-44 12” 2Ω/8 Ω 5” 200 Watts 20Hz-350Hz 1.0 Ft
G112-4 12” 4Ω 5” 200 Watts 20Hz-350Hz 1.0 Ft
G110-44 10” 2Ω/8Ω 4

3

⁄4” 200 Watts 24Hz-350Hz 0.5 Ft

G110-4 10” 4Ω 43⁄4” 200 Watts 24Hz-350Hz 0.5 Ft

*In-car response

3

3

3

3

2.0 Ft3(4” x 13” Port)

2.0 Ft3(4” x 13” Port)

1.3 Ft3(3” x 10” Port)

1.3 Ft3(3” x 10” Port)

©2006 Boston Acoustics, Inc. Covered by patents issued and pending. Al l Rights Reserved. SureSet is a trademark and Boston, Boston Acoustics, the Boston Acoustics
logo, and RadialV
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 Phone # [phone] Fax # [phone] Web : www.bostonacoustics.com

ent are registered trademarks of Boston Acoustics, Inc. All specifications are subject to change.