Boss Audio BV2600UA Owner Manual

BV2600UA

Congratulations on your purchase of a Multi-Media Disc Player.

It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will afford you years of listening pleasure.

Thank you for making a your choice for mobile video entertainment.

Multi-Media DiscPlayer with USBand Memory Ports

USER’S MANUAL

Page CONTENTS

2 Safety Information

3 Installation

4 Wiring Diagram

5 Operation

7 Using The Remote Control

8 General Operation

9 CD/MP3 Operation

10 DVD/VCD Operation

14 Data Disc Play Operation

15 Memory Card Play Operation

15 USB Device Operation

15 AV In Operation

16 Additional Information

17 Setup

17 System Setup

18 Language Setup

19 Audio Setup

19 Digital Setup

19 Specifications

20 Troubleshooting

BV2600UA User ’s Manual - page 1

Safety Information

CAUTION:

This mobile DVD player is a class 1 laser product. However, this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Do not open covers and do not repair yourself. Refer servicing to qualified personnel.

WARNING:

- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

- To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories.

- This device is intended for continuous operation.

DISC NOTES

You can playback the following discs: DVD VIDEO/DVD AUDIO

VIDEO CD/AUDIO CD

MP3/WMA/JPEG/MPEG4

Handling and Cleaning

- Dirt, dust, scratches and warped discs will prevent proper operation.

- Do not place stickers or make scratches on discs.

- Do not bend discs.

- A disc should always be kept in its case when not in use to prevent damage.

- Do not place discs in the following places:

1.Direct sunlight.

2.Dirty, dusty and damp areas.

3.Near car heaters.

4.On the seats or dashboard.

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistened with isopropyl (rubbing) alcohol. Never use solvents such as benzene, thinner or conventional record cleaners as they may mar the surface of the disc.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region Management Information

This mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player cannot play this disc.

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Preparing New Discs with Rough Spots

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the disc will not be

BV2600UA User ’s Manual - page 2

properly seated and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the

Rough spots on outside edge

Ball point pen or pencil

right. Press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on inside edge

Installation

Notes:

- Choose a mounting location where the unit will not distract the driver.

- Before installing the unit, connect the wiring temporarily and make sure it is all connected properly and the unit and the system works.

- Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

- Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

- Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

- If installation angle exceeds 30° horizontal, the unit may not perform properly.

- Avoid installing the unit where it will be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

The unit is designed for home-use and car-use. When installed in the car, please follow the installation instructions below.

SCREW

M5x25

SCREW

M4x5

REMOVE THE SCREWS WHICH LOCKTHE DVD MECHANISM

SCREW

M4x5

MODE

PLAY/PAUSE

POWER

USBPORT and MEMORY CARD

EJECT

AVINPUT

Notes:

1. First remove the two transport screws that lock the DVD mechanism. Then attach the brackets on both sides of unit with screws (m4X5). Finally, install the unit with screws (m5X25).

2. When locating the bracket, you can slide the screw (m5X25) to left side or right side as necessary. In the figure above, select two holes from those marked 1, 2, 3 and 4 to secure the bracket.

BV2600UA User ’s Manual - page 3

Wiring Diagram

Method A

Use the conversion cable to obtain DC 12V power supply input through the AC/DC ADAPTER or the cigarette lighter according to the illustrations shown below:

ToAudio system inputs

RIGHT

Red

LEFT

White

VIDEO

To Video system inputs

Method B

According to the illustrator below, install the unit in the car and obtain DC 12V power supply input.

ToAudio system inputs

Yellow

RIGHT

Red

LEFT

White

VIDEO

Yellow

FUSE(3A)

CONSTANT 12 VOLTS (YELLOW) GROUND (B-) (BLACK) IGNITION SWITCH (ACC+) (RED)

To Video system inputs

IR Sensor

If you need to mount the DVD player in a location where the control panel is inaccessible, or where the line-of-sight between the remote control and the face of the player is interrupted, connect the remote sensor as shown in the diagram above.

Mount the IR Sensor in a convenient location which is in direct line-of-sight with the use location of the remote control. Point the remote control in the direction of the sensor to operate the player.

BV2600UA User ’s Manual - page 4

Operation

Features and Controls

Front panel

POWER

Remote Control

PLAY/PAUSE

USB PORT and MEMORY CARD

MODE

EJECT

AV INPUT

BV2600UA User ’s Manual - page 5

1. POWER

Press this button to turn the unit on/off.

Press this button to pause playback. Press it again to resume playback.

3MODE

Press this button to switch between DVD and AV modes.

Press this button to skip back one track.

Press this button to skip to the next track.

6. EJECT

Press this button to eject the disc from the disc slot (7).

7. DISC Slot

Gently insert a disc (with the printed side up) into the disc slot (7) until you feel some resistance.

8. AV IN

Connect external audio/video equipment to the unit through the AV IN terminals.

9. USB

10. SD/MMC

11.IRSENSOR

12. RESET

Press RESET button (12) to restore the default settings.

13. DISP

Press this button to display disc information during playback.

14. A-B

A-B repeat allows a selected passage to be repeated playback.

15. RPT

Use this button to switch from the different modes available.

16. ZOOM

Press this button to zoom in or out of the video image.

17.▲/▼/◄/►

In some menus, buttons serve as cursor buttons to move up/down/left/right.

18. ENTER

Use this button to confirm the Track/Chapter selected by the numeric buttons or selected with the cursor buttons on TV screen.

JACK

PORT

CARD SLOT

▲/▼/◄/►

disc

19. SETUP

Press the button to enter into the System Setting menu.

20. TITLE/PBC

In DVD or VCD (with PBC on) mode,

TITLE/PBC

press button to display the TITLE menu that is stored on disc.

21. 0~9

Numeric buttons are used for Track/Chapter selections and other functions.

22. AUDIO

On multi-audio sound track disc, press this button to change the sound track.

23. SUB-T

Changes the subtitle language on multisubtitle language DVD disc.

24. MUTE

Press to silence the audio output. Press it again to resume the previous volume level.

25. ANGLE

Change the view angle on multi-angle DVD disc.

26. VOL+/VOL-

Press the VOL+ to increase the volume level. Press the VOL- to decrease the volume level.

27. MENU

In DVD or VCD ( ) mode, press the button to display the TITLE menu that is stored on the disc.

28.

Press the button to search forward rapidly.

29.

Press the button to search in reverse rapidly.

30. GOTO

Press the button to select the bookmark that you set.

31. ■ STOP

Press once to pause playback. Press it again to stop playback.

32. PROG

Press this button to play the tracks in an order which you have programmed.

33. RDM

Press the button to play all tracks on the disc in a random order. Press again to cancel this function.

AUDIO

with PBC on

BV2600UA User ’s Manual - page 6

Using The Remote Control

Preparing and Using The Remote Control

* Before using the remote control, please take the transparent insulator strip off the bottom of remote control. * Point the remote control at the remote sensor (11) from no more than 6 feet away. * If the IR sensor is exposed to direct sunlight, the remote control may not be able to communicate with it properly. You may need to relocate or shield the IR sensor. * If you are more than 30 away from

being directly in front of the IR sensor, the remote control may be unable to communicate properly. * The remote control is a small, lightweight precision device. To avoid damage, short battery life, operational errors and poor response, observe the following:

-Do not subject the remote control to excessive shock.

-Donotputinapocket.

-Keep away from food, moisture and dirt.

-Do not place in direct sunlight.

2. Replacing the battery Replace the battery with the same type of battery and the (+) side facing up.

3. Closing the cover Gently push in the holder until it is securely locked into place.

Battery replacement

The remote control uses a lithium button type battery, model CR 2025 3V. Do not use any other kind of battery in the remote. Follow these instructions when installing or replace the battery.

1. Remove the battery holder by pressing the locking tab with your thumb and slide the battery holder out.

BV2600UA User ’s Manual - page 7

+ 16 hidden pages