Boss bv9565bi User Manual

00

Contents

1

1

Before You Start

Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11

2

Installation

Wiring Connections 12
Installing the Unit 13
Detach the Unit 14

3

Common Operations

To Select Source by Menu 15
Reset the Unit 15
Turning the Unit On/Off 15
Volume Control 15
Setting the Sound Characteristics 15
EQ Setting 15
Turning Loudness On/Off 16
Eject a Disc 16
Insert a SD Card 16
Angle Setting 16
Mute Function 16
Night Mode 16
Mode Selector 16
Infrared Sensor 16

5

4

Main Menu

Main Menu Setup 17
Video Setup 17
Audio Setup 18
Source Setup 18
System Adjustment 18

2

55

DISC/VCD/MP4

DISC/VCD/MP4 Setup 22
DISC/VCD/MP4 Operation 22
Selecting Tracks 22
Number Buttons 22
Pause the Playback 22
Stop the Playback 22
Play tracks at Random 23
Repeat Playing 23
Skip backward/forward/

Playback

System Switch 23
Slow Motion Playback 23
Increase Picture Size 23
On Screen Display 23
Setting the Playback Time 24
Changing Audio Language 24
Changing the Subtitle Language 24
Changing the Viewing Angle 25
Selecting Audio Output 25
Program Playing 25
Playing PBC(Menu) 25
Selecting Menu 26
DISC Setup Menu 26

6

CD/MP3/SD/USB

CD/MP3/SD/USB Setup
CD/MP3/SD/USB Operation
Selecting Tracks
Repeat Playing
Number Buttons
Selecting Track
Stop Play
Playing Tracks at Random
Pause the Playback
Skip backwafd/forward/F.F/F.REW
the Playback

23

34

F.F/F.REW the

33

34

34

34

34

35

35

33

34

Contents

00

On Screen Display
Program Playing
Eject SD Card
Eject USB

7

Tuner

Listening to the Radio 36
Band Selector 36
Manual/Automatic Tuning 36
DX/LOC Selector 36
Selecting The stored Station 36
MO/ST Selector 37
AMS 37
Automatically 37
Number Buttons 37
On Screen Display 37

Goto FREQ 37

8

Bluetooth

Bluetooth Operational Interface 39

Using a Bluetooth Wireless connection 39
Pairing Your Unit and Bluetooth Phone 39
Pairing in Handsfree Mode 39
Cellphone Pairing Mode 40
Bluetooth Connection and Disconnection 40
Using the Unit as a Handsfree Devic 40
Last Number Dialing 40
To Dial by Cellphone 40
To Dial by the Unit 41
Using the Unit as Bluetooth Music 41
Audio Transfer between The Unit and
Phone 41

35

35

35

35

9

AUX

AUX Touch Screen Menu 42

10

IPOD

IPOD Operation 43
Selecting Tracks 43
Playing Track F.F/F.REW 43
Switch 43
Repeat Playing 43
Playing Tracks at Random 43
Pause the Playback 43
File Selector 44
Video or Picture Mode 44
Eject IPOD 44

11

Additional Information

Simple Troubleshooting Guide 45

3

01

Before You Start

Additional Information

11

IMPORTANT SAFEGUARDS

Be sure to connect the color coded wires

1

according to the diagram. Incorrect con­nections may cause the unit to malfunct­ion or damage the vehicle s electrical sy­stem.

2

Be sure to connect the speaker (-) wires
to the speaker (-) terminal. Never conn­ect the left and right channel speaker c­ables each other or to the vehicle body.

3

Make sure all the connections are comp­letely correct before turning on your unit.

When replacing the fuse(s), the replace-

4

ment must be of the same amperage as
shown on the fuse holder.

Do not block vents or radiator panels.

5

Blocking them will cause heat to build up
inside and may result in fire.

To lessen the driver's distraction, install

6

the unit in an appropriate place.

7

Power the unit on after starting the engine
otherwise it will shut off due to lack of
power.

8

Do not place the remote control in a place
susceptible to high temperature or direct
sunlight. Doing so will damage the remote.

9

Do not use the unit in
low temperatures. Also avoid high humidity
and direct sunlight.

10

Take care of the magnetism of the unit.
Do no put the credit card, cassette or w­atch around the unit.

,

extremely high or

About this manual

This unit features a number of sophisti­cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
DISC/VCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, but there are also functions that
can be operated by the buttons provided
for the main unit.

Common Symptoms

There is no power.

The disc cannot
be loaded.

The device does not
work correctly
(EJECT, LOAD,
PLAY)

There is no sound.

The operation keys
do not work

The sound of the
disc player skips

No radio reception.

In automatic search
mode the radio does
not stop at a trans­mitting station.

Cause Solution

The car ignition is
switched off

The fuse has blown.

There is another disc inside
the player

Inserted disc is upside down

The surface of disc is extre­mely dirty, Scrached or
damaged.

Temperature inside the car is
too high.

The volume control is set too
low.

The device has not been wired
correctly.

1. The built-in microprocessor
is not operating properly.

2. Front panel is not properly
attached into its place

The installation angle is more
than30 degrees

The surface of the road is
uneven.

The surface of disc is extremely
dirty,scrached or damaged.

The antenna cable is not
connected.

The transmission signals are
too weak.

If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or ACC.

Replace with same amperatge fuse rate.

Remove the disc from the player

Insert the compact disc with the label facing
upward

Clean the disc or try another disc,if the new
disc works correctly, the first disc is damaged.

Cool off until the ambient temperature returns
to normal.

Turn up the volume properly.

Check the connections according to
the wiring diagram.

1. Switch the device off and on again or press
the RESET button.

2. Remove and reinstall the front panel.

Adjust the installation angle to less than 30
degrees

Wait until the road becomes smoother before
playing the disc.

Clean the disc or try another disc, if the new
disc works correctly, the first disc is damaged.

Insert the antenna cable firmly into the antenna
socket of the unit.

Tune in to a radio station manually.

11

To minimize disturbance of the video
frequency, keep far away from the unit
when using your phone.

4

45

10

IPOD

Before You Start

01

File Selector

During IPOD mode, press in the monitor
to go back to the previous catalog.

Press in the monitor to select the previous
5 tracks, press to select the next 5 tracks
(show as in the right of the picture).

Note:

* This function is operated by using the touch
screen only.

MENU

Playlist

Artist

Album

Genre

Track

Video or Picture Mode

During IPOD mode, press to select
video or audio. Video and picture can be
played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.

Note:

* This function is operated by using the touch
screen only.
* The IPOD TV should be set ON in this
function.

* Video playback requires Gen 5.5 or earlier
Photo or Video iPod. iPod Touch, iPod Cl­ assic, and iPod Nano with video will only
play music files.

VIDEO

Eject IPOD

If the iPod is removed during iPod mode, the
unit will automatically switch to radio mode.

PRECAUTIONS

This unit can play the following DISCs only:

Type of disc

DISC

VCD

CD

MP3

MPEG-4

NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.

When driving, do not attempt to
modify the unit. Modifying the
unit may cause an accident.

Stop the vehicle before carrying
out any operation that could
interfere with your driving.

Do not turn the unit on in extre­ mely high or low temperature.
Be sure the temperature inside
the vehicle is between +60 C
and -10 C before turning on your
unit .

To enjoy optimum sound and
images while playing, handle the
DISCs as follows:

Recorded material

Sound and moving pictures

Sound and moving pictures

Sound only

Sound only

Sound and moving pictures

Size of disc

44

5

01

Before You Start

IPOD

10

Maintenance

Replacing the Fuse

Make sure the amperage matches the
specified value when replacing the fu­ses. If the fuse is blown,
a new one. Be sure you are using one
with the correct rating.
problem occurs, it would be subjected
to the malfunction. In such cases,
please consult to the nearest service
dealer.

!

Warning

Never use the fuse with the rated

amperage more than that supplied to

your unit, otherwise it will damage the

unit.

Replacing the Remote Battery

When the range of the operation of
the remote control becomes short
or stops operating, Replace the battery.
Be suer to use a lithium Battery button
Cell Cr2025.

Gently pull out the Battery Holder while
pressing the Stopper.

Put the button-type battery with mark(+)
upward into the Battery Holder.

replace it with

If the same

Insert the Battery Holder into the Remote
Control.

Precautions on Using Lithium
Battery

Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth,
to ensure its perfect connected.

Install the battery with the proper polarity.

To prevent short circuit, do not use
metal tweezer to handly the battery.

!

Warning!

Improper handle with the battery may

lead to explosion.

It cannot be charged , disassembled or

thrown into a fire.

IPOD Operation

During IPOD playback, connect the IPOD
wire (5V) to the one in backside of the main
unit. When the iPod is loaded, the unit will
play a track. To go back to the source status,
press iPod to enter into iPod setup:

8/97

disco-yeye

00:02:47

MENU

Back to the previous menu

Briefly press to play previous track,
press and hold to fast forward.

Briefly press to play next track,
press and hold to fast rewind.

Play/ pause

VIDEO

Mode switch between IPOD and
main unit

SRC

Mode switch

Selecting Tracks

During IPOD playback, press to
return to the beginning of the current track,

21

press again within 3 seconds to play
previous track ,press to play next track .

Note:

* Pressing / in the monitor to performs
the same function

21

21

Playing Track F.F/F.REW

Press and hold or to play the track
fast forward or fast rewind . Do it again or
press ENTER to resume to play normally.

20

Note:

* Pressing and holding / in the monitor
also performs the same function

Switch

During playback, press to turn to
IPOD, the screen shows: Play video on your
iPod. Then touch screen to return. Then
you can operate your iPod. Press again
to return to main unit operation.

Note:

* This function is operated by using the touch
screen only.

VIDEO

VIDEO

Repeat Playing

During playback, press
repeat, disc repeat, off.
cancel this function.

Note:

* This function is operated by using the remote
control only.

15

RPT to track

Press it again to

Playing Tracks at Random

During IPOD playback, when

RDM button, Shuffle off,
Shuffle Album will be activated.

Note:

* This function is operated by using the remote
control only.

pressing

Shuffle Track,

16

Pause the Playback

27

During IPOD mode, press
pause the playback, Press it again to return
to normal playback.

Note:

Press in the monitor or briefly press

*

SEARCH+/- on the head unit also performs
the same function.

button to

6

43

09

AUX

Before You Start

01

AUX Touch Screen Menu

Press SRC to switch to the AUX mode:

VOL-

AV SET

In AUX mode, select AV SET:

AUDIO ADJUST

VIDEO ADJUST

VIDEO FORMAT

EXIT

AV SET

For more details to adjust AUDIO, VIDEO
and SYSTEM (Auto 1: PAL, NTSC, SECAM),
(Auto 2: P-M, P-N). Please refer to pages 19 to 20.

To decrease the volume

To increase the volume

Mode selector

VOL+

Location of the Controls

Front Panel

The Base

42

7

01

Before You Start

1

SRC/PWR

During waiting mode, briefly press it to turn
on the unit; during working status, briefly
press it to select radio mode or playback mode/
press and hold it to turn the unit on or off.

2

BAND / + (Bands selector / Increase) Button
During radio mode, press it to select bands,

press and hold REL until ANGLE appears to
adjust angle backward.

3

MUTE / - ( Mute / Decrease ) Button
Briefly press it to mute; press and hold it to

switch to the night mode; press and hold REL
until ANGLE appears to adjust angle forward.

4

REMOTE Infrared Sensor

5

SEL/MENU Button
Briefly press it to select the function; press

and hold it to display the main menu.

6

VOL + / VOL -

Press VOL + / VOL - to increase or decrease
the volume,
used to adjust Balance, Fade, Bass and Treble

and pressing them will also be

08

7

REL Button

Briefly press it to slidedown the monitor, then
you can insert or eject a disc or a SD card.

f you press and hold, the monitor shows

I
ANGLE. Then press

8

RES Button
Press it to set the unit to initial status.

9

(Eject) Button

Press it to eject a disc.

10

Disc Loading Slot
Press REL first before you load the disc.

11

Common SD Card Slot

+/- to adjust angle.

Bluetooth

To Dial by the Unit

When cellphone is connected, press to
input the call number, then press
to dial. DIAL OK will appear. When the call
is picked up, PICKED UP appears.

Note:

* Press CLEAR on the remote control or

22

8

in the monitor to delete wrong inputs.

* Pressing in the monitor also performs the
same function.

Using the Unit as Bluetooth

23

30

Audio Transfer between the Unit
and Phone

6

Press to change the conversation from
the unit to the cellphone.

Note:

*

The function might cause the bluetooth to be
disconnected for some phones. If this happens,
press the button while on the call to be
paired back automatically.

6

Music

12

MIC(microphone of bluetooth mode)

.

During bluetooth mode, the music on the
cellphone
To select music fast: press to play

will play through the unit.

21

the previous track, press to play the next
one.
Pause play: press to pause play.
Stop play: press to stop play, and

17

18

press the PLAY to return to the beginning
of the current track.

Note:

* This function is only valid on the remote control .

8

41

08

Bluetooth

Before You Start

01

Cellphone Pairing Mode

1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.

2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cell phones have different blue­ tooth menus, please refer to your phone
manual.)

3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)

4. To input the password, the password is:

1234.

5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.

Bluetooth Connection and
Disconnection

When you established a bluetooth connection
between this unit and the cellphone, the blue­tooth icon on the display appears in red.

29

Press PAIR to turn off bluetooth connec­tion, and appears in blue.

29

Press , PAIR SUCCESS will appear on
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRING TIME OUT.

Note:

* Make sure the phone battery has good power.
If not, the connection quality may be affected.
* To ensure connection succeed

----Please selete menus of cellphone with bluetooth.

----Please reset the unit and cellphone.

----Please reset every step of pairing.
* Disconnect after paring

----Please pair the phone manually.
For example: pairing fixture cellphone connect.

* Pressing in the monitor also performs the
same function.
* Press in the monitor to turn off the
bluetooth function.

5

7

Using the Unit as a Handsfree
Device

When the unit is ringing,
show CALL FROM and the phone number
**********

.
To accept call: Press to answer a call,
the display will show PICK UP.
To reject call: Press to reject a call,
the display will show REJECT
To end call: Press to end call,
the display will show HANG UP

Note:

* Some of cellphones do not support reject
call during bluetooth mode.

* Pressing and in the monitor also
performs the same function.

the display will

30

31

.

.

Last Number Dialing

30

Press button, last call number will
apear, press again, and then REDIAL
OK appears on the display during
conversation.

Note:

* Pressing in the monitor also performs
the same function.

To Dial by Cellphone

1.

When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.

2. When you receive a call, PICK UP appears
on the display.

Remote Control

26 25

1

2

3

4

5

20

6

7

8

9

10

11

13

12

28

29 30

Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page 6.

24

23

22

27

21

19

18

17

16

15

14

31

40

9

01

1

2

3

4

5

6

7

Before You Start

SOURCE/PWR

GOTO (playing time/track)

BAND/TITLE

AMS/MENU

LOC/SUB -T

ST/AUDIO

PTY/ANGLE(Program type/DVD play
angle)

8

OSD

During DISC mode, briefly press it to show
the current information, press and hold it
to turn off. During radio mode, press this
button to show the version number.

9

ZOOM (zoom in or zoom out)

10

11

12

13

14

15

16

Slow Forward/Reward)(

P/N (System Adjusting)

Mute

PROG(Program playing)

VOL+/VOL-/SEL

RPT(Repeat Playing)

RDM (Playing Tracks at Random)

(Pause/Play)

17

(Stop Playing)

18

19

SETUP

20

21

22

23

24

25

26

AF/EQ (Alternative Frequency/Equalizer)

(F.R/F.F)

(Previous/Next Track)

CLEAR

0~9( Number) Buttons

(Eject Button)

TA/LOUD (Traffic Alarm/Loudness)

Button

27

ENTER

ENTER)

BT (bluetooth mode) Button

28

PAIR

29

(Left/Right/Up/Down

During bluetooth, press to pair.

30

During bluetooth, press to dial, dial again
or answer a phone.

31

During bluetooth, press to hang up or refuse
a phone.

Bluetooth(optional )

Bluetooth Operational Interface

28

Press BT on the remote control or BT on
the monitorr to open the bluetooth operational
interface:

1

Number Buttons

To input the phone number.

2

Dial last call, answer a call

3

Hang up, refuse a call.

4

Number Show

5

PAIR

6

ACH (audio change)

Note:

* Some phones can switch the audio from the unit
to the phone.

7

POWER

Press it to turn on or turn off the bluetooth
function.

8

C (clear)

9

BACK

Using a Bluetooth Wireless
Connection

The device can be dialed wirelessly in bluetooth
status. Before using the bluetooth function,
please turn on your cellphone bluetooth func­tion.

Note:

* To provide the best sound without or little
distorted sound(

sidetone is caused by cellphone or network

).

itself.
* .Perfect bidirectional conversation
* Bluetooth ver2.0 compliant.

Please well connect microphone to the unit

*

before connecting bluetooth

.

Pairing Your Unit and Bluetooth
Phone

The device supports handsfree profile, head­set profile, A2DP( Audio Advanced Distri­bution profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instruction for the first time use, after that
the unit will connect automatically.

Pairing in Handsfree Mode

1. Press PAIR, PAIRING shows on
the screen.

2. CELLPHONE CONNECTION to search
fixtures;

3. If the cellphone has connected, PAIR
SUCCESS appears, then CONNECT ,
will change from blue to red.

08

Some reverberation or

5

Note:

* Pressing on the monitor also performs
the same function.

10

39

08

Tuner

Before You Start

01

RDS Setup

123

RDS 87.50MHz

:

7

4

5

1

2

3

4

5

6

7

8

9

10

NONE

OFF

NONE

8

AF(Alternative Frequencies)

Press it to activate AF function.

TA (Traffic Alarm)

Press it to activate TA function.

Press it to select PTY code.

PTY(Program Type)

Press it to activate PTY function.

During PTY ON, press this button to
search the playing track s type.

BACK

Press it to turn to return to the radio.

PS:

To display the current RDS station's
programs information.

SEEK+/-

Press it to tune automatically.

TP(Traffic Program)

TP OFF: the current station doesn't have
any trafic programs
TP Search
programs
TP ON: the current staion is broadcasting
trafic program

EON ON()Enhanced Other Networks
information

EON OFF: No station has TP;
EON ON: RDS signal finds that another
station is broadcasting trafic program and
reminds the user of searching this station.

Search for stations with traffic

SCH

OFF

OFF
OFF

Alternative Frequencies

26

When AF is on,

1

10

Briefly press AF to activate the auto
searching station function.
the unit will skip to the RDS Frequency
with good signal.

Note:

It is also performed by pressing in the

9

*

monitor.

Traffic Alarm

6

Briefly press TA to activate the traffic
alarm function. When AF is on, there is TA
displayed on the LCD. If there is no TP
mode will search TP stations automatically.

The TA is green when it is played by a sta-
tion, if not, it is yellow.
When TA is playing, the volume will be ad­justed to a TA level automatically When in
other modes (such as DISC,AUX), if a TA
program is played, the mode will skip to the
RDS status automatically. It will resume to
the primary mode after the TA is over.

Note:

It is also performed by pressing in the

*

monitor.

When TA is off, .the LCD will not display TA

*

25

, the

2

2

Program Type

Briefly pressing PTY to activate PTY
function.
When PTY is on, PTY ON appears in the
monitor. You can press UP/DOWN
to select the program type, and then press
PTY CODE to search the special program.
The monitor displays PTY SEARCH.

If PTY is off, PTY OFF appears in the

7

Specifications

General

Power Requirement

Load Impedance

Max.Power Output

Tone Controls

Dimensions

Mounting
Dimensions

FM Section

Tuning Range

(Optional)

IF Range

Usable Sensitivity
(-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

14.4V DC
(11-16V allowable)

85W X 4

7dB
Bass 100Hz
Treble 10KHz

Approx.184 x 178 x100

(d/w/h)

mm

Approx.164 x183x112

(d/w/h)

mm

Approx.3.5kgWeight

87.5-108(MHz)
(Europe)

87.5-107.9(MHz)
(U.S.A.)

10.7MHz

10dBuV

60dB

30dB 1KHz

40-12KHz

AM Tuner Section

Frequency Range
(Optional)

IF Range

(-20dB)

522-1620(KHz)
(Europe)
530-1710 (KHz)

(U.S.A.)
450KHz

32dBuVUsable Sensitivity

VCD/CD Player Section

VCD Signal System

Signal-to-noise Ratio

Distortion

Resolution

Brightness

AUTO/PAL/NTSC

60dB

55dB(1KHz)Separation

0.3%

1440 X 234 plxels

600 NITS

DISC Player Section

DISC Signal System

Channels

Frequency Response

Signal-to-noise Ratio

Note:

Due to continuous product improve-

ment, specifications and design are

subject to change without notice.

AUTO/PAL/NTSC

2

40Hz to 16KHz

60dB

60dBSeparation

monitor and the searching is disabled.

Note:

It is also performed by pressing in the

*

monitor.

4

38

11

02

Installation

Tuner

07

Wiring Connection

IPOD connection

(Optional)

SUB-W RCA

Rear View
Camera Input

VIDEO IN

AUX IN R/L

USB

ANTENNA

Rear View Camera
Input Trigger

Ignition Key

Battery +

Ground

Rear L
Speaker

Front L
Speaker

-

+

-

+

1

2

(Thick White Line
with White Head)

(Brown line with
brown head)

(Brown line with
yellow head)

(Black line with
yellow head)

(Black line with
red & white head)

Black

Black

Orange

Red

Yellow

Black

Green/Black

Green

White/Black

White

Output Plug(Male)

Output Socket(Female)

Rear Monitor 2

(+5V)

Rear Zone Out 2/R

Rear Zone Out 2/L

Rear Monitor 1

Rear Zone Out 1/R

Rear Zone Out 1/L

FRONT RCA Line
OUT R/L

REAR RCA Line
OUT R/L

(Light Grey line with
yellow head)

(Light Grey line with
red head)

(Light Grey line with
white head)
(Light Grey line with
yellow head)

(Light Grey line with
red head)
(Light Grey line with
white head)

(Dark Grey line with
red & white head)

(Light Grey line with
red & white head)

3

4

2

MO/ST Selector

During radio status, you can press ST
button on the remote control MO-
NO mode or STEREO

mode.

Stereo reception is on when Stereo
appears.

It is switched to MONO mode ono
appears.

Note:

It is only valid on remote control.

*

Switch to MONO compulsively to improve

*

the listening quality when week signal.

It is only valid in FM.

*

6

to select

when M

AMS

During radio status, briefly press AMS

4

button on the remote control to scan each

station 6

stored seconds respectively which

stored in

1

are Number Buttons (from 1

6) the cor

to . When you can press responding
Number Buttons or ton when your
desired station is

23

AMS but

on, it will stop on that

station.

4

Black
Brown

Pink

Blue

Violet/Black

Violet

Grey/Black

Grey

3

Fan window

Ground

Parking Brake

Front Illumination
Control(+12V)

Antenna
power +

Rear R

-

+

Speaker

Front R

-

+

Speaker

When you press and hold AMS for
more than 2 seconds,
activate the

memory storing The

it will

radio automatically selects and
has it stored in any one of Number

the

Buttons (from1 to 6).

Note:
* The unit can store up to 6 stations
each band.
* Pressing in the monitor also performs
the same function.

7

button

automatically

function.

a station

23

for

Number Buttons

During radio status, press Number Buttons
to receive the stored stations.

During radio status, Number Buttons
(from 1 to 6) can help you yo-

23

ur favorite station. You can follow the

store

steps

as below:

1

When turned to a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-

ears on the LCD, which indicates that
station is already stored in the corresp­onding number button.

2

Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.

Note:

Pressing in the monitor performs the same

*

function.

5

On Screen Display

During radio status, briefly press OSD
to display the edition information. The preset
frequency displays as the default setting.

8

Goto FREQ

2

Press GOTO, and the monitor
Then press the number

to input the valid
frequency as 100.00,. The program will then
be played.

Note:

It is only valid on remote control.

*

It is only valid when GOTO FREQ is ON in

*

main menu.

shows FREQ.

12

37

07

Tuner

Installation

02

Listening to the radio

1 2

FM1 P . CH:1 87.50MHz

87.50M 87.50M

5

1

2

3

4

5

6

7

8

9

90.10M

6

Band Indicator

7

Shows which band the radio is tuned
to.

Preset Number Indicator

Shows what preset has been selected.

Frequency Indicator

Shows which frequency the tuner is
tuned.

SEEK+/SEEK-

Briefly press to tune by the presettable
range, press and hold to tune automatically.

The 6 stations of the current band.

Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.

BAND(AM/FM)

To select the bands.

AMS

Briefly press to scan the current station,
hold and press to search the stored station
automatically.

RDS

Press it to enter the RDS MENU.

SRC

Press this button to select the signal
source.

3

107.90M

106.10M98.10M

8

Band Selector

During radio status, repeatedly press
BAND button to select bands in

lowing order:

fol

4

Note:

* Pressing in the monitor or BAND on the
main unit also performs the same function.

9

Manual/Automatic Tuning

Manual Tuning: ress ( button

the

FM1

AM2 AM1

FM2

(For Two Bands)

2

Por )

3

FM3

Installation Method DIN Front-Mount

183183

112112

11

Bend these claws
outward for a tight fit,
if necessary.

on the remote control continuously to select

station downward upward

a or respectively.

Automatic Tuning: ress and
for more than 3

) button seconds, the ra-

automatically searches down-

dio a station
ward upward

or respectively and plays when

P hold ( or

Push in the unit

To support the unit

Fire Wall

it finds a station.

Note:

sta

Note:

ap

4

5

Installation Method

Installation using the screw holes at

sides of the unit.the

Select a position where the screw holes of
the mounting bracket lied with the car and

screw holes become aligned

the of the main unit
(are tighten the screws (see

fitted), and at 2 pla-

ces on each fasten them to the car.

supp

side). And then

2

Bracket supplied
to your car

Pressing in the monitor performs the same

*

function.

DX/LOC Selector

During radio status, press LOC button

to select or weak station reception.strong
LOC pears on the display and only
local tion is available. when it disappears

oth distance and local stations can be

b
received.

The function is only valid on remote control.

*

The function is invalid in AM band.

*

Selecting the Stored Station

During radio status, press button to
select the stored station upward, press to
select downward.the stored station

Note:

The function is only valid on remote control.

*

27

Dashboard or
Console

36

13

02

Installation

CD/MP3/SD/USB

06

Detach the Unit

Detach the front panel before disassembl­ing the unit.

1.Take out the Outer Trim Frame.

Main Parts List

Mounting Sleeve x1 Rear Mounting Bolt x1

2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrated)
until they click. Pulling the keys makes it
possible to remove the unit from the dashboard.

£p

M 5 x 5

4 Screws

£p

M 5 x 20

Harness Rubber x1

9

5 Screws

Pause the Playback

During CD/MP3/SD/USB playback, Press
to switch between play and pause.

Note:

* Pressing in the monitor also performs the
same function.

Skip backward/forward/F.F
/F.REW the playback

Press ( or ) on remote control to

20

perform fast rewind or fast forward.

2 X 4 X 8 X 16X

Note:

* This function is operated by using the remote
control.

On Screen Display

During CD status, press OSD button the
display shows:

Single elapsed

Total
remain

Note:

* This function is operated by using the remote
control.

Single remain

Total
elapsed

Program Playing

During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press to move the cursor to START.

27

Press ENTER to start program playing.
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.

18

Note:

The function is only valid on remote control.

*

22

* Press CLEAR to clear the mistake input.

13

Eject SD Card

Push SD card to eject it.
During SD Mode:,ejecting the SD card will
switch the unit to DISC mode. If there is
no disc, the unit will switch to USB Mode.
If no USB, the unit will switch to Radio mode.

Eject USB

Pull out the USB to eject it.
During USB Mode, removing the USB will
switch the unit to Disc. If there is no DISC,
it will switch to Radio mode.

Outer Trim Frame x 1

14

Keys x 2

Connecting Wire x1

Steel Bar x 1

USB Connecting Wire
(optional)

35

06

CD/MP3/SD/USB

Common Operations

03

Selecting Tracks

During MP3/SD/USB playback, press
to play previous track, press to play

21

next track.
During CD playback, first press to
return to the beginning of the current track,
press again within 3 seconds to play

21

previous track , press to play next track .

Note:

* Pressing and on the monitor perform
the same function.
* In CD/MP3/SD/USB mode, you can press
track's Number or name to play.

21

21

21

Repeat Playing

During CD/MP3/SD/USB playback , press

15

replay the current track, press

RPT to

it again to cancel this function.

Note:

* This function is operated by using the remote
control.

* The default setting is Disc Repeat.

Number Buttons

Press one of Number Buttons(0~9) to
select a track to play automatically.

Note:

* Press track region and the screen shows the
number keys, touch the number to select tracks.

* Press CLEAR to clear the mistake input.

23

22

Selecting Track

During CD playback, first press GOTO,
and TFT shows : DISC go to:--:--,press your
desired time of the playback by using num­ber buttons.
Then press GOTO button, track go to:--:--
appears on TFT, now input your desired
numbers to play the current time of your
selection.
During MP3/SD/USB mode, first press
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track's Number to play it; then press GOTO
button, and the TFT shows : --:--, now input
the desired time to play the current track at
this point.

Note:

* This function is operated by using the remote
control.

* Press CLEAR to clear the mistake input.

Stop Play

22

¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ

During CD/MP3/SD/USB playback, Press
to stop the playback.

18

Note:

* Pressing in the monitor performs the same
function.

2

2

Playing Tracks at Random

During CD/MP3/SD/USB playback,

16

RDM button on the remote control to

any track at

play random under the directory
which you select. P return to

ress it again to

normal playing.

Note:

* This function is operated by using the remote
control.

press

To Select Source by Menu

In any mode, press SRC in the monitor, the
following menu will appear:

FM

Press it to select your desired item: FM,
DISC, IPOD ,SD Card, USB, BT, AUX, and
press SET to enter into the main menu. If
you want to enter into bluetooth, press
BT; if it does not enter into, that means the
unit does not include the function. In any
mode, press SRC to return to the previous
mode. Press BACK to return to previous
mode.

Note:

* If the font display in cyan, that means this does
not have this function.

Reset the Unit

Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.

Remove the front panel, then press RES
button in the panel w object,
(such as a ball the unit to

ith a pointed

point pen) to set

8

initial status.

Notes:
* When ome errors occur on the

button to resume to normal.
It will
morized functions.

* This function can only be operated by the
main unit.

s display, you can

also press RES

erase the clock setting and some me-

Turning the Unit On/Off

Briefly press PWR button to turn on the
unit, during working status, press and hold
it to turn off or turn on the unit.

1

Note:

* Pressing PWR button on the main unit also
performs the same function.

Volume Control

Press VOL+ button to increase

14

sound level and press VOL- button to

decrease sound level.

* Pressing VOL+/- on the main unit or VOL+/­ in the monitor performs the same function.

Setting the Sound Characteristics

the

Note:

Repeatedly press SEL button to select

14

14

the mode in the following order:desired

After selecting the desired mode, you
adjust the current level by pressing
buttons

.

Notes:

* Pressing VOL+/- and SEL on the main unit
also performs the same function.

the

14

can

VOL

EQ Setting

While listening to the popular music, classic
music or rock music, you select the co­rresponding preset modes to adjust the sou­nd quality ing EQ button.

perfectly by us

Repeatedly pressing button to choose
the following modes turn:

POP

OFF

The default setting is OFF.

Note:

* This function is operated by using the remote
control only.

26

3

in

can

26

EQ

CLAS

ROCK

34

15

03

Common Operations

CD/MP3/SD/USB

06

¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ

Turning Loudness On/Off

Press and hold
the loud function. Pressing the button will
increase the low frequency.
to quit this function.

Note:

This function is operated by using the remote

*

control only.

25

LOUD button to activate

Press it again

Eject a DISC

Briefly press to
eject a disc or the TFT will return to the
initial status.

Note:

* Pressing on the remote control also performs

while the TFT is slanted

Mute Function

12

Press button to shut off sound
output, and appears on the LCD.
Press it again to resume to previous volume
level.

Note:

Briefly pressing MUTE on the main unit also

*

performs the same function.

Night Mode

Press and hold MUTE button to enter
the night mode, press it again to switch to
the normal mode.

Note:

* This function is operated by the main unit only.

the same function.

Mode Selector

Insert a SD Card

Briefly press
then

REL after turning the unit on,

insert a common SD card into SD slot

when the TFT slanted.

Angle Setting

Press and hold REL till ANGLE appears
in the monitor, the press + to adjust
monitor backward by definite angle, press

3

- to adjust it forward.

Notes:

* When adjusting the monitor angle, use this
method! Otherwise the unit will be damaged.

* This function is operated by the main unit only.

7

2

Repeatedly briefly press SOURCE button
to select the different modes available.

Note:

* Briefly Pressing SRC on the main unit also
performs the same function.

Infrared Sensor:

Receptor on the main unit for the wireless
remote control.

the

CD/MP3/SD/USB Setup

During CD playback, touching the screen
shows the following menu:

CD

CD

CD

CD

CD

CD

CD

01 Track
02 Track
03 Track
04 Track
05 Track
06 Track

01:18

Track region

Track 03/16

Track Region:

MP3

Demo
amour

MP3

MP3

Automatic
Be natural_s_e

MP3

Can you celebr

MP3

clon_bing bing

MP3

Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
Touch the " X " to exit this menu.

00:00

MP3

001/105

00:00

1
4
7 8

--

3

2
5

6
9

0

X

3

During MP3/SD/USB playback, touching
the screen shows the following menu:

MP3

00:00
001/105

Track region

00:00

CD/MP3/SD/USB Operation

Insert a CD/MP3 disc into the slot, the unit
will play automatically.

MP3

Demo
amour

MP3

MP3

Automatic
Be natural_s_e

1

MP3

Can you celebr

MP3

clon_bing bing

MP3

Press REL after turning the unit on, then

nsert a SD card when the TFT is slanted and

i
the programs in the card will be played.
From the back of the main unit insert the
USB and programs in the USB will be pl­ayed.

you have loaded a disc, USB and SD Card,

If
press source to toggle thru and choose which

Scan the tracks

CARDCARD

CARD appears in the SD mode and USB

4

appears in the USB mode.

SELSEL

Sound characteristics

Decrease volume level, adjust some items

Increase volume level, adjust some items

Play/pause

Stop

Previous track

Next track

DISC setup menu

MODE

Mode selector

media source you would like to choose.

Note:

Press SRC on the main unit to switch to DISC

*

*
*
*

ith SD and USB inserted, press this key

mode. W
repeatedly to switch between USB, SD and disc.

MODE

Press to turn to mode switch.
Bit rate not more than 320kbps.
Supports ID3V1.

16

33

05

DISC/VCD/MP4

Main Menu

04

---Preferences page--

Default

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Example showing how to set load factory setting:

--Preference Page--

Auto
Eng
Eng

Eng

(Press , or , then press ENTER)

--Preference Page--

TV Type
Audio
Subtitle
Disc Menu
Parental
Password

Default

Load Factory Setting

Auto
Eng

Eng
Eng

Reset

Main Menu Setup

FM

Press and hold SETUP on the remote control
or MENU on the main unit, or press SET in
the monitor to enter the menu as follows:

VIDEO

SOURCE

This menu includes , ,
SOURCE, SYSTEM, EXIT. Press them in
the monitor to set the desired status.

Note:

* Press and hold SETUP or press MENU on
the main unit to set up this menu; press them
in the monitor to select the option.

AUDIO

SYSTEM

EXIT

VIDEO AUDIO

1.Video Adjustment

After selecting VIDEO, the sub menu will
appear as follows:

EXIT

In this menu you can adjust ,
COLOR, TINT, BRIGHT, .

CONTRAST

PICTURE

Picture Adjustment

Press PICTURE in this menu, it will appear
as follows:

SHARP

SHARP 20

EXIT

Press and to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.

Note:

* Adjusting the other options perform the same
operation.

32

17

04

Main Menu

DISC/VCD/MP4

05

2.Audio Adjustment

After selecting AUDIO, the sub menu will
appear as follows:

VOLUME

BALANCE

BASS

You can adjust VOLUME, SUBWOOF,
BALANCE, FAD, BASS, TREBLE, For
example, press FAD, the setting menu
will appear as follow:

Press and to adjust the desired FAD
level, press EXIT to exit this menu.

Note:

* Adjusting the other options perform the same
operation.

SUBWOOF

FAD

TREBLE

EXIT

SUBWOOF

FADE F4

EXIT

3.Source Adjustment

In the main menu, press SOURCE in the
monitor, the sub menu will appear as follows:

AUX ON

IPOD

ON

SD ON

USB ON

You can switch all of the items to ON or
OFF, press the corresponding button to set.

If one of them was set OFF, that function
is null.

Note:

* If the font display is in red, this model does
not contain this function.

4.System Adjustment

After selecting SYSTEM, the sub menu
will appear as follows:

CLOCK SYS

CLOCK SYS

KEY BEEP

KEY BEEP

MONI FLEX

MONI FLEX

EXIT

EXIT

In this menu you can adjust CLOCK SYS,
KEY BEEP and so on.

Note:

* If the item display in sky-blue, then it can not be
set up.

---Preferences page--

Disc Menu

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Parental

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Password

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Example showing how to set Disc Menu Language:

--Preference Page--

Auto
Eng
Eng

Eng

Example showing how to set parental control:

--Preference Page--

Auto
Eng
Eng

Eng

Example showing how to set password, and the default pas sword is 8888.

--Preference Page--

Auto
Eng
Eng

Eng

(Press , or , then press ENTER)

--Preference Page--

TV Type
Audio
Subtitle

Disc Menu

Parental
Password
Default

Preferred Menu Language

Auto
Eng

Eng

Eng

English

French
Spanish
Chinese
Japanese
Korean
Russian
Thai

(Press , or , then press ENTER)

--Preference Page--

G

TV Type
Audio
Subtitle
Disc Menu

Parental

Password
Default

Set Parental Control

Auto
Eng

Eng
Eng

2
3
4
5
6
7
8

Off

PG
PG 13
PGR
R
NC 17
Adult

(Press , or , then press ENTER)

--Preference Page--

TV Type
Audio
Subtitle
Disc Menu
Parental

Password

Default

Change Password

Auto
Eng

Eng
Eng

Change

18

31

05

DISC/VCD/MP4

Main Menu

04

Subtitle

(Press

--Preference Page--

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Example showing how to set subtitle language:

(Press , or , then press ENTER)

--Preference Page--

Auto
Eng
Eng
Eng

TV Type
Audio

Subtitle

Disc Menu
Parental
Password
Default

Preferred subtitle Language

Auto
Eng

Eng

Eng

English

French
Spanish
Chinese
Japanese
Korean
Russian
Thai

Clock System

CLOCK SYS

CLOCK SYS

KEY BEEP

KEY BEEP

MONI FLEX

MONI FLEX

EXIT

EXIT

Press CLOCK SYSTEM in the monitor to
set 12 HOUR or 24 HOUR in this menu.

Key Beep

CLOCK SYS
CLOCK SYS

KEY BEEP

KEY BEEP

MONI FLEX

MONI FLEX

EXIT

EXIT

In this menu you can adjust KEY BEEP,
press it in the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.

MONI FLEX

Reverse Pola

LAMP SEL

LAMP SEL

EXIT

Setting REVERSE POLA in this menu.
If the signal is +12V , please press
BATTERY in the monitor. If the signal is
0V, please press GROUND.

Lamp SEL

LAMP SEL

LAMP SEL

EXIT
EXIT

In this menu you can adjust LAMP SEL,
press it in the monitor and select ON or OFF,
the default setting is ON.

AMS Fullup

30

CLOCK SYS

CLOCK SYS

KEY BEEP

KEY BEEP

MONI FLEX

MONI FLEX

MANUAL

AUTO

EXIT

EXIT

In this menu you can adjust MONI FLEX,
The display screen is flexed automatically
when set AUTO, automatics closes when
set MANUAL.

LAMP SEL

EXIT

In this menu you can adjust AMS FULLUP.
If the setup is ON, when the presettable
stations are full, no new station is allowed to
store.When you select OFF, it will search
continually.

19

04

Main Menu

DISC/VCD/MP4

05

Local Area

LOCAL AREA

LOCAL

GOTO FREQ

You can select EUROPE or USA or ORIENT
to search the stations quickly by your
current area.

EUROPE

U.S.A

EXIT

Local

LOCAL AREA

LOCAL

GOTO FREQ

EXIT

In this menu, you may choose to search Local
Stations. When ON is selected, only strong
signaled local stations may be received. When
this is OFF, weak signal out-of-town stations
may be received.

RT Scroll

SLOW
NORMAL
FAST

EXIT

To select your desired speed, SLOW,
NORMAL, FAST. The default settingis
NORMAL.

TA Volume

LOW
NORMAL
HIGH

EXIT

To select your desired volume, LOW,
NORMAL, HIGH. The default setting is
NORMAL.

Regional Switch

---Preference page---

TV Type

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Audio

(Press

TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default

Go To Preference Page

Example showing how to set TV type:

--Preference Page--

Auto
Eng
Eng

Eng

Example showing how to set Audio language:

--Preference Page--

Auto
Eng
Eng

Eng

(Press , or , then press ENTER)

--Preference Page--

TV Type

Audio
Subtitle
Disc Menu
Parental
Password
Default

Set TV Standard

Auto

Eng
Eng
Eng

PAL

Auto

NTSC

(Press , or , then press ENTER)

--Preference Page--

TV Type

Audio

Subtitle
Disc Menu
Parental
Password
Default

Preferred Audio Language

Auto

Eng

Eng
Eng

English

French
Spanish
Chinese
Japanese
Korean
Russian
Thai

Goto FREQ

LOCAL AREA

LOCAL

GOTO FREQ

EXIT

To select ON, you can use the GOTO button
on the remote control to select a station's
frequency directly by using the numbers.

20

REG OFF

REG ON

EXIT

To set the AF searching region, the default
setting is ON.

29

05

DISC/VCD/MP4

Main Menu

04

--General Setup Page--

Captions

(Press

TV Display
Angle Mark
OSD Lang
Captions
Screen Saver

Go To General Setup Page

Screen Saver

(Press

TV Display
Angle Mark

OSD Lang
Captions

Screen Saver

Go To General Setup Page

Example showing how to set captions on/off:

--General Setup Page--

Wide
On
Eng Eng

Off
On

Example showing how to set Screen Saver on/off:

--General Setup Page--

Wide
On
Eng Eng
Off
On

(Press , or , then press ENTER)

--General Setup Page--

TV Display
Angle Mark

OSD Lang

Captions

Screen Saver

Closed Captions

Wide
On

Off

On

On

Off

(Press , or , then press ENTER)

--General Setup Page--

TV Display
Angle Mark

OSD Lang
Captions

Screen Saver

Screen Saver

Wide
On

Off

On

On

Off

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

(Picture 1)

RT SCROLL

TA VOLUME

REGION

EXIT

(Picture 2)

Press in picture 1 or press in picture 2
to enter the following menu:

Adjust Screen

SAVE

Press ADJ SCREEN to display the above
menu. Press the square button at the top left
,then the button will move to place ,
press it at place , it will move to place ,
then place , press SAVE.

Clock Adjustment

CLOCK

00:00:00

EXIT

28

CLOCK

Press CLOCK ADJ in the monitor to
adjust the clock.

EXIT

21

05

DISC/VCD/MP4

DISC/VCD/MP4

05

DISC/VCD/MP4 Setup

During DISC/VCD/MP4 playback, touch
the screen. The bottom will display the
following menu:

Play/pause

Stop

Decrease volume level
Increase volume level
DISC setup menu

Mode selector

Note:

* Press the right corner repeatedly to play the
next track( shows), press the left corner to
play the previous track( shows).

DISC/VCD/MP4 Operation

Insert a disc into the slot , the unit will
automatically switch on. If a disc is loaded,
press SOURCE on the remote control to start
the playback. If the unit is in other menu,
press DISC in the monitor to switch to disc
play.

Note:

Press SRC on the main unit to switch to DISC

*

mode. If an SD card and USB is plugged into
the unit, press this key over again to toggle
between USB, SD and disc.

Pressing in the monitor performs the same

*

function.

10

Selecting Tracks

During DISC/MP4 playback, press
to play previous track, press to play

21

21

next track.
During VCD playback, press

21

to return to the beginning of the current
track, press again within 3 seconds
to play previous track ,press to play

21

21

next track .

Note:

* Pressing left/right twice continuously in the

monitor also performs the same function.

Number Buttons

Press one of Number Buttons(0~9)

23

to select a track, it will be played auto­matically.

Note:

Press this region and the screen shows the

*

following menu: number keys appears, touch
the number to select tracks.
Touch the " X " to exit this menu.

Track region

1
4
7 8

--

* Press CLEAR to clear the input.

22

3

2
5

6
9

0

X

Pause the Playback

During DISC/VCD/MP4 playback, press

17

to switch between play and pause;
During stop mode, press this button to
resume playback mode.

Note:

* Pressing in the monitor also performs the
same function.

Stop the playback

During DISC/VCD playback, first press,
, then press or on the remote
control to replay. Press twice to stop
playing completely, then press to return
to the beginning of the current track.
During MP4 playback, press first, then
press to return to the beginning of the
current track.

Note:

* Pressing in the monitor performs the same
function.

--General Setup Page--

TV Display

(Press

TV Display
Angle Mark

OSD Lang
Captions

Screen Saver

Go To General Setup Page

Angle Mark

(Press

TV Display
Angle Mark

OSD Lang
Captions

Screen Saver

Go To General Setup Page

OSD Lang

(Press

TV Display
Angle Mark

OSD Lang
Captions

Screen Saver

Go To General Setup Page

Example showing how to set TV Display mode:

--General Setup Page--

Wide
On
Eng Eng
Off
On

Example showing how to set picture mode:

--General Setup Page--

Wide
On

Off
On

Example showing how to set language mode:

--General Setup Page--

Wide
On

Eng
Off
On

(Press , or , then press ENTER)

--General Setup Page--

TV Display

Angle Mark
OSD Lang

Captions
Screen Saver

Set TV Display mode

(Press , or , then press ENTER)

--General Setup Page--

TV Display

Angle Mark

OSD Lang
Captions

Screen Saver

Set Angle Mark

(Press , or , then press ENTER)

--General Setup Page--

TV Display
Angle Mark

OSD Lang

Captions
Screen Saver

Set OSD Language

Wide

On

Off
On

Wide

On

EngEng
Off
On

Wide
On

Eng

Off
On

Normal/PS
Normal/LB

Wide

On

Off

English

French
German
Spanish
Italian
Dutch
Portuguese

22

27

05

DISC/VCD/MP4

DISC/VCD/MP4

05

Selecting MENU

1

Selecting Menu: During DISC status,
press MENU to return to the root

4

menu, all of the chapters will appear on
monitor. You can press or button to
select your desired chapter.

2

Selecting Title: During DISC status,

3

press TITLE to return the title menu,
all of the titles will appear on monitor.
You also can press or button to

27

select your desired chapter.

Note:

Under DISC menu, touch the screen to select

*

items.

If the touch menu options are invalid or the

*

disc does not support touch-TITLE, that is
the same as bottons on the remote control
will display on the screen. Press to left,
press to right, press to up, press to
down and press to ENTER.

27

27

23

23

DISC SETUP MENU

Press on remote control or
in the monitor, main menu and sub-menu
will appear on the TFT. Press [ ][ ]
[ ][ ] on the remote control
your desired item, then press ENTER.

Press to the pervious one, press SETUP
or press [ ][ ][ ][ ] to move the cursor
on , then press ENTER to exit the
menu setup.

Notes:

* The selections are the preferred options that
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own prefer­ ence will be used.
* Regarding SETUP MENU, please refer to
the following pages for more details.

* Some functions vary depending on the types
of models or formats of the disc.
* Touch the screen to select menu, touch it
again to select the item.

SETUP

7

2

to select

Playing Tracks at Random

During DISC/VCD/MP4 playback,
RDM button on the remote control to play
any track at
which you select. P return to

random under the directory

ress it again to

normal playing.

Note:

* This function is operated by using the remote
control.

press

Repeat Playing

During DISC playback, press
the remote control to perform replay
function as followings:

Chapter

Off

During VCD/MP4 playback , press RPT
on the remote control to TRACK REPEAT.

Note:

* This function is only valid on remote control.

15

Title

RPT on

ing

Skip backward/forward/F.F
/F.REW the playback

20

Press ( or ) on remote control to
perform fast rewind or fast forward.
Each pressing will change as follow:

4X

Note:

* This function is only valid on remote control.

8 X

16X 2X

Note:

The function can be operated by selecting the

*

16

DISC MENU SETUP.

Slow motion playback

During DISC mode, press to slow
play. There are speeds as follow:

During VCD mode, press to slow
play. There are speeds as follow:

Note:

The function is only valid on remote control.

*

Increase the size of picture

During DISC/VCD/MP4 mode, Press
ZOOM to increase the picture in size. There
are sizes as follow, Each pressing increases
the size until the maximum size is reached.

2X 3X 4X

No Change

Note:

The function is only valid on remote control.

*

To remove the image by pressing button.

*

9

27

26

System Switch

During DISC/VCD mode, Press P/N on
remote control to set the TV standard to PAL
or NTSC or AUTO system.

AUTO

PAL

NTSC

On Screen Display

Title remaining

Chapter
remaining

8

Chapter
elapsed

23

During DISC status, press OSD button
the display shows:

Title elapsed

Display off

05

DISC/VCD/MP4

DISC/VCD/MP4

05

During VCD status, press OSD button the
display shows:

Single elapsed

Display off

Total
remain

Single remain

Total
elapsed

During MP4 status, press OSD button the
display shows:

Single
elapsed

Note:

* This function is operated by using the remote
control.

Single
remain

Display off

Setting the Playback Time

During DISC mode, press GOTO button
to set the playing time, when the TFT dis-

itle

play : T /Chapter/Audio/Subtitle/Angle
/TT time/CH time/Repeat/Time Disp.

7

Press [ ][ ] to select the options, press

2

ENTER to set the status. Then press NU-
MBER BUTTONS or [ ][ ] to set
the current status.

During VCD mode, press GOTO button
to set the playing time, when the TFT dis-

track

play : /disc time/track time/repeat
/time disp. Press [ ][ ] to select the

options, press ENTER to set the status.
Then press NUMBER BUTTONS or

23

[ ][ ] to set the current status.

During MP4 playback, first press GOTO,
and monitor shows : ---, press your desired
track by using number buttons and press EN-
TER to set the status. Second press GOTO
button, and the monitor shows: -:--:--, input
your desired time, then press ENTER.

Note:

* This function is operated by using remote
control.

* Press CLEAR to clear the mistake input.

22

2

7

2

2

2

the

Changing audio language
(Multi-audio)

DISCs can provide audio playback with
different language. With DISCs featuring
multi-audio recordings, you can press

6

AUDIO to switch between language and
audio systems during playback.

Selection options switch as follows:

AUDIO 1 AUDIO 2 AUDIO 3......

Note:

* This function is operated by using remote
control.

* This function only operates with DISCs fea­ turing multi-audio recordings.
* The number in the mark on a DISC's
package indicates the number of recorded
languages/audio systems.

2

the

Changing the subtitle language
(Multi-subtitle)

With DISCs featuring multi-subtitle recor­dings. You can press SUB-T to switch
between subtitle languages during playback.

Selection options switch as follows:

Subtitles 1

Note:

* This function is operated by using remote
control.

* This function only operates with DISCs fea­ turing multi-subtitle recordings.
* The number in the mark on a DISC's
package indicates the number of recorded
subtitle languages.

Subtitles 2

5

......

Subtitles OFF

the

2

Changing the viewing angle
(Multi-angle)

With DISCs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press ANGLE to switch among vie-

7

wing angles during playback.

Selection options switch as follows:

ANGLE 1 ANGLE 2 ANGLE 3......

Notes:

* This function is operated by using remote
control.

* This function only operates with DISCs featu­ ring multi-angle recordings.
* The mark on a DISC's package indic­ ates it features multi-angle scenes.
The number in the mark indicates the
number of angles from which scenes were shot.
* It is invalid to press ANGLE during fast
forward/fast reverse or pause.

3

3

the

Selecting Audio Output

To change audio output, press AUDIO
button to select the following channel:

Stereo

Mono Right

Selecting the corresponding output to set
the different sound characters.

Note:

This function is operated by using the remote

*

control only.

6

Mono Left

Program Playing

During VCD mode, press PROG, the
TFT displays the program menu. Press
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the
previous page; move the cursor to and
press ENTER to the next page.
During this process, press to cancel
the program playing.

Note:

This function is only valid on the remote control.

*

22

* Press CLEAR to clear the input.

13

27

18

Playing PBC (Menu)

During VCD status, press TITLE, PCB.
Playback starts and the menu of entire
disc appears on the monitor. Then you
can select your favorite track by using

Number Buttons. When a track is playing,

you can to return to
menu

if you would like to end the track and

4

press MENU the

select others. To cancel PBC playing, press

3

button again.

TITLE

Note:

This function is operated by using the remote

*

control.

PBC playing confirms to version 2.0 of VCD

*

disc and SVVD disc only.

3

23

24

25