Boss BA-CS10 Owner’s Manual

STEREO MICROPHONE

BA-CS10 Owner’s Manual

reproduced in any form without the written permission

of ROLAND CORPORATION.

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.

The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.

• Do not open or perform any internal modifications on the unit.

...............................................................

•Do not allow any objects (e.g., flammable material,

coins, pins); or liquids of any kind (water, soft drinks, etc.) to

penetrate the unit.

...............................................................

•Protect the unit from strong impact.

(Do not drop it!)

•Should you remove

Ring Stopper, keep them in a safe place out of children’s reach, so there is no chance of them being swallowed acciden-

tally.

...............................................................

Important Notes

•Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.

•To remove dirt, wipe with a soft dry cloth.

•When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.

•If the volume of your equipment is raised when you make connections, you risk causing acoustic feedback and/or damaging your sound reproduction equipment. Minimize the volume before you make connections.

•This microphone can be used only with equipment that supports plug-in power.

You must make sure that the microphone input jack to which you connect this microphone is a 1/8" (3.5 mm) stereo mini jack that supports plug-in power.

•This microphone cannot be used with computer.

•Do not leave the microphone connected when you transport the recorder; you risk damaging the microphone if you do so.

*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

Using the Microphone

Orientation of microphone during recording

Audio source being recorded

Attaching the microphone

If you use the ring stopper, firmly push it all the way in before you connect the microphone to the input jack.

If the ring stopper is not pressed in deeply enough, it will Shockmount tend to pull the plug out, and faulty contact may occur.

* Do not twist the microphone, or forcefully bend or pull
the shockmount structure.	Firmly press
Ring stopper	all the way in

Settings on the MICRO BR recorder

If you’re using this microphone with the MICRO BR, you must switch on the MICRO BR’s Plug-in Power. Refer to the section “Other Convenient Functions – Using plug-in powered microphone” in the MICRO BR Owner’s Manual, and make the appropriate settings.

For EU Countries

5 1 0 0 0 0 5 3 1 1

0 1