Bose SM10, SM5, SM20 Usage And Application Manual
SHOWMATCH SYSTEMS
USAGE AND APPLICATION GUIDE
PRO.BOSE.COM
1
WELCOME
From small ground-stacked setups in modest venues
to outdoor music festivals and arena-scale events,
ShowMatch DeltaQ systems can be found all around the
world in a variety of sound reinforcement applications.
ShowMatch loudspeakers deliver outstanding
vocal clarity with consistent frequency
response and sound pressure level across a
defined coverage area. And with integrated
DeltaQ technology you can ensure consistent
performance across the entire audience area at any venue.
Adaptable and scalable, ShowMatch loudspeakers are the
ideal solution for rental and staging market applications.
When an event calls for lower SPL capabilities in a more
compact format, simply build a smaller ShowMatch array
with the same vertical coverage as larger, higher-powered
ShowMatch setups.
About this guide
We oer a complete integrated suite of software design
tools, digital signal processing, tour-ready amplifier racks
and transportation accessories to support ShowMatch
loudspeakers. This guide gives an overview of them.
Optimized for use in the demanding rental and staging
environment, ShowMatch system solutions allow you to
easily transport, set up, configure and use ShowMatch
loudspeakers in the fast-paced environment of the
entertainment production industry. ShowMatch systems
enable rental sound and A/V production service providers
to give their clients a brand they know and trust, while
delivering outstanding audio quality for a wide range of
field applications.
SHOWMATCH SYSTEMS
USAGE AND APPLICATION GUIDE
TABLE OF CONTENTS
Safety Information ...................................................................................................................................................................................................2
ShowMatch System Components ....................................................................................................................................................................7
SM5, SM10, SM20, SMS118 .............................................................................................................................................................................................................7
Connections and Wiring .......................................................................................................................................................................................8
Full-range modules ........................................................................................................................................................................................................................ 8
Amplification ...............................................................................................................................................................................................................8
Recommended Amplification for Rental/Production Applications ............................................................................................................................9
Recommended Signal Processing for Rental/Production ..............................................................................................................................................9
Recommended Amplification for Installed Applications ...............................................................................................................................................10
Economy Setting ...........................................................................................................................................................................................................................10
Performance Setting .....................................................................................................................................................................................................................11
Recommended Signal Processing for Permanent Installations ...................................................................................................................................12
Designing ShowMatch Systems .......................................................................................................................................................................13
System Concept .............................................................................................................................................................................................................................13
System Software ......................................................................................................................................................................................................15
EASE Focus ......................................................................................................................................................................................................................................15
PowerSoft ArmoníaPlus ..............................................................................................................................................................................................................16
Example 1: Outdoor Live Music Example 1 ...........................................................................................................................................................................17
Example 2: Outdoor Live Music Example 2 .........................................................................................................................................................................18
Example 3: Indoor Live Music Example 1 ..............................................................................................................................................................................19
Example 4: Indoor Live Music Example 2 ...........................................................................................................................................................................20
Example 5: Corporate AV Example 1 ...................................................................................................................................................................................... 21
Example 6: Corporate AV Example 2 ................................................................................................................................................................................... 22
ShowMatch Tour Rack ......................................................................................................................................................................................... 23
ShowMatch Tour Rack Configuration ................................................................................................................................................................................... 23
Input Priority and Routing ........................................................................................................................................................................................................23
Initial System Configuration .....................................................................................................................................................................................................23
Initial System Loudspeaker Configurations ........................................................................................................................................................................24
Input Configurations ....................................................................................................................................................................................................................25
Loudspeaker Connections ........................................................................................................................................................................................................25
ShowMatch Tour Rack Connection .............................................................................................................................................................. 26
ShowMatch System Presets .............................................................................................................................................................................29
ShowMatch Array Presets .........................................................................................................................................................................................................29
ShowMatch Module Presets .....................................................................................................................................................................................................30
ShowMatch Subwoofer Presets ...............................................................................................................................................................................................31
ShowMatch Cardioid Presets ....................................................................................................................................................................................................31
ShowMatch Transportation Accessories .................................................................................................................................................... 32
Truck Pack Information ..............................................................................................................................................................................................................34
ShowMatch Suspension Hardware ...............................................................................................................................................................35
ShowMatch Array Frame (SMAF) ..........................................................................................................................................................................................35
ShowMatch T-Bar Array Frame (SMAFT) ........................................................................................................................................................................... 36
ShowMatch Array Pullback Bracket (SMPULL) ................................................................................................................................................................37
Array Suspension ...................................................................................................................................................................................................39
Connect Array Frame to Subwoofer ....................................................................................................................................................................................40
Connect Pull Back Bracket to Full-range Module .............................................................................................................................................................41
Center Rail Suspension Using the Array Frame Multipoint Bracket .........................................................................................................................42
Ground Stack Arrays Installation ...................................................................................................................................................................42
Product Dimensions ....................................................................................................................................................................................................................43
Adjust Ground Stack Bracket Angle .....................................................................................................................................................................................43
Attach Ground Stack Bracket to ShowMatch SMS118 ....................................................................................................................................................44
Attach Ground Stack Bracket to ShowMatch Array Frame .........................................................................................................................................45
ShowMatch System Reference Guide ......................................................................................................................................................... 46
System Testing ...............................................................................................................................................................................................................................46
Measurement Set Up ...................................................................................................................................................................................................................46
ShowMatch Loudspeakers Technical Specifications....................................................................................................................................................... 47
ShowMatch Systems Service and Repair Parts List ........................................................................................................................................................48
Rock al Parque, Bogotá, Colombia
ShowMatch system owner – Illuminacion, Jaime Dussan
PRO.BOSE.COMPRO.BOSE.COM
2 3
Please read this installation guide carefully and save it for future reference.
This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation
and safety guidelines for this product in typical fixed-installation or portable-system applications. Please read this document and all safety warnings
before attempting installation.
WARNINGS:
All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to
ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building
codes and regulations. Consult the local authority having jurisdiction before installing this product.
Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the
responsibility of the installer to evaluate the reliability of any mounting method used for their application. Only professional installers with
the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
CAUTION:
Installed loudspeaker arrays require regular inspection and routine maintenance to ensure proper function and
safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the
structural integrity. Immediately replace worn or damaged components.
Do not make unauthorized alterations to this product; doing so may compromise safety, regulatory compliance, system performance, and
may void the warranty.
Never exceed 24 ShowMatch full-range or 18 ShowMatch subwoofer modules using the integrated suspension system for arrays. Please
refer to product labels for Working Load Limit data.
Visual Inspection and Maintenance of Components
Bose ShowMatch systems should be assembled, installed and suspended by expert, trained personnel who are experienced in suspending
loudspeaker systems of this type. Prior to suspending or mounting any loudspeaker system, always inspect all components (suspension
frames and hardware, enclosures, brackets, pins, eyebolts, etc.) for corrosion, deformation, cracks or missing parts that could compromise
the strength and safety of the loudspeaker system being suspended. Do not suspend or mount the system until corrective action has
been taken.
Installed systems should be regularly inspected to determine that load-bearing elements do not exhibit any condition which may
compromise the strength and safety of the suspended loudspeaker system, frequency of inspection, or as required by local regulations.
The components used in suspending a ShowMatch system must be load rated for the intended use. Suspension hardware can be obtained
from industrial supply catalogs and specialized distributors. Hardware intended for overhead use will comply with ASME B30.20 and will be
manufactured according to product traceability procedures. Hardware of this type will have a specified working load limit (WLL).
For all other materials used in the suspension of ShowMatch systems, refer to the hardware manufacturer’s inspection and maintenance
guidelines.
Bose Professional is not responsible for the application of its products for any purpose, or the misuse of this information. Furthermore,
Bose Professional is not responsible for the conditions arising from avoiding regular maintenance and inspections, or any other
abuse condition.
Attachment to Structures
ShowMatch system installations should utilize a licensed Professional Engineer who is familiar with local building and seismic codes as it
applies to the suspension of objects from building structures. The hardware and methods of installation must conform to the specifications
of the Professional Engineer retained for the project. Failure to install components in the manner specified may result in damage, injury
or death.
Note: Always use recommended software to confirm safe working load limits with exact array configurations, pitch angles, and connection points.
Guidelines for Installation and Setup of ShowMatch DeltaQ Array Module Loudspeakers
Installation information contained in this document is only a general guideline and cannot, as such, represent all requirements and precautions.
Accordingly, anyone using this material assumes all liability and is expressly responsible for the safety of all loudspeaker array designs and mounting
configurations applied in practice.
Prior to the installation or portable-system setup of any overhead loudspeaker, a licensed Professional Engineer must approve the location and method
of attachment to the building structure or support-truss structure and confirm they are consistent with all building codes and regulations. Ensure the
mounting surface and the method of attaching the loudspeaker system to the surface is capable of supporting the total weight of the system. A safety
factor of 10:1 is recommended.
Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker system and its
intended application. We recommend Bose mounting accessories when available. A licensed professional engineer must review the design and fabrication
of any custom mounting hardware.
Bose ShowMatch array module loudspeakers feature an integrated quick-pin suspension system, designed to facilitate loudspeaker array mounting by
professional installers. Module to module connections should be made using only the integrated suspension link-bars with the included or optional loadrated “quick pin” fasteners. Unmarked (not rated for load bearing) fasteners should not be used.
Do not suspend loudspeaker using handles as attachment points. Handles are NOT designed for load bearing!
Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment points of the mounting system to
the loudspeaker. This is recommended even if not required by local regulation. Consult a licensed Professional Engineer or a suspension professional for
proper design and installation.
Do not under any circumstances climb the array.
Important Safety Instructions
SAFETY INFORMATION
Important Safety Instructions
1. Read these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Visual Inspection and Maintenance of Components
Bose ShowMatch systems should be assembled, installed and suspended by expert, trained personnel who are
experienced in suspending loudspeaker systems of this type. Prior to suspending or mounting any loudspeaker
system, always inspect all components (suspension frames and hardware, enclosures, brackets, pins, eyebolts, etc.)
for corrosion, deformation, cracks or missing parts that could compromise the strength and safety of the loudspeaker
system being suspended. Do not suspend or mount the system until corrective action has been taken.
Installed systems should be regularly inspected to determine that load-bearing elements do not exhibit any condition
which may compromise the strength and safety of the suspended loudspeaker system, or as required by local
regulations.
The components used in suspending a ShowMatch system must be load rated for the intended use. Suspension
hardware can be obtained from industrial supply catalogs and specialized distributors. Hardware intended for overhead
use will comply with ASME B30.20 and will be manufactured according to product traceability procedures. Hardware of
this type will have a specified working load limit (WLL).
For all other materials used in the suspension of ShowMatch systems, refer to the hardware manufacturer’s inspection
and maintenance guidelines.
Bose Professional is not responsible for the application of its products for any purpose, or the misuse of this
information. Furthermore, Bose Professional is not responsible for the conditions arising from avoiding regular
maintenance and inspections, or any other abuse condition.
Attachment to Structures
ShowMatch system installations should utilize a licensed Professional Engineer who is familiar with local building
and seismic codes as it applies to the suspension of objects from building structures. The hardware and methods of
installation must conform to the specifications of the Professional Engineer retained for the project. Failure to install
components in the manner specified may result in damage, injury or death.
PRO.BOSE.COMPRO.BOSE.COM
4 5
Lea detenidamente esta guía de instalación y consérvela para consultarla en el futuro.
Este producto está diseñado para que solo instaladores profesionales realicen su instalación. Este documento está diseñado para proveer las pautas de
seguridad e instalación básicas a los instaladores profesionales de este producto en aplicaciones de sistema portátil e instalación fija comunes. Lea este
documento y todas las advertencias de seguridad antes de comenzar la instalación.
ADVERTENCIAS:
Todos los productos Bose
deben instalarse según las reglamentaciones locales, estatales, federales y del sector. Es responsabilidad del
instalador garantizar que la instalación del sistema de soporte y los altavoces se realice conforme a los códigos aplicables, incluidos los
códigos y las reglamentaciones de construcción locales. Consulte a la autoridad local competente antes de instalar este producto.
El montaje inseguro o la suspensión en alturas de cualquier carga pesada puede provocar lesiones graves o la muerte, además de daños a
la propiedad. Es responsabilidad del instalador evaluar la fiabilidad de cualquier método de montaje utilizado para su aplicación. Solo los
instaladores profesionales con el conocimiento de los componentes físicos adecuados y las técnicas de montaje seguro deberían intentar
instalar cualquier altavoz en altura.
PRECAUCIÓN:
Se deben inspeccionar regularmente los arreglos instalados de altavoz, además de realizarles mantenimiento de rutina con el propósito de
garantizar su funcionamiento adecuado y
operación segura. Revise los accesorios y los componentes físicos para instalación, y busque signos de corrosión, torcimiento o cualquier
otra condición que pueda disminuir la integridad estructural. Sustituya inmediatamente los componentes desgastados o dañados.
Solo realice alteraciones autorizadas a este producto. De lo contrario, podría comprometer la seguridad, el cumplimiento de las
reglamentaciones y el rendimiento del sistema; además, podría anular la garantía.
Nunca exceda 24 módulos de rango completo ShowMatch o 18 módulos de subwoofer ShowMatch usando el sistema de montaje integrado
para los arreglos. Consulte las etiquetas de producto para obtener información sobre los datos del límite de carga de trabajo.
Nota: Utilice siempre el software Modeler o “Bose Array Tool” para confirmar los límites de seguridad de carga de trabajo con cada configuración del
arreglo, ángulos de inclinación y los puntos de conexión.
Pautas de instalación y configuración de los altavoces de arreglo modular ShowMatch DeltaQ
La información de instalación incluida en este documento solo corresponde a pautas generales y, como tal, no puede representar todos los requisitos
ni todas las precauciones. Por lo tanto, todo aquel que utilice este material asume toda la responsabilidad y es expresamente responsable de todos los
diseños de arreglo y las configuraciones de montaje del altavoz realizadas en la práctica.
Antes de la instalación o la configuración del sistema portátil de cualquier altavoz en altura, un ingeniero profesional licenciado debe aprobar la
ubicación y el método de fijación a la estructura del inmueble o a la estructura colgante, y confirmar que sean compatibles con todos los códigos y las
reglamentaciones de construcción. Asegúrese de que la superficie de montaje y el método de fijación a la superficie del sistema de altavoces pueda
soportar el peso total del sistema. Se recomienda un factor de seguridad de 10:1.
Obtenga todos los componentes de montaje del sistema de fabricantes acreditados. Seleccione un sistema de montaje adecuado para su sistema de
altavoz y su aplicación prevista. Recomendamos que utilice accesorios de montaje de Bose si están disponibles. Un ingeniero profesional licenciado debe
revisar el diseño y la fabricación de todos los componentes físicos personalizados para la instalación.
Los altavoces modulares ShowMatch incluyen un sistema de montaje de conexión rápida diseñado para facilitar el trabajo de los instaladores
profesionales. Las conexiones modulares se deben realizar solo con las barras de conexión de montaje y las sujeciones de conexión rápida de carga
incluidos u opcionales. No se deben utilizar sujeciones sin marcas (no aptas para soportar cargas).
No utilice las asas como puntos de fijación para suspender el altavoz. Las asas NO están diseñadas para soportar la carga.
Utilice un cable de seguridad, unido de forma independiente al gabinete, en un punto distinto del punto de fijación de la carga del sistema de montaje
del altavoz. Esto se recomienda incluso si la reglamentación local no lo requiere. Consulte a un ingeniero profesional licenciado o a profesionales de
andamiaje para realizar un diseño y una instalación adecuados.
Bajo ninguna circunstancia trepe el arreglo.
Instrucciones de Seguridad Importantes Instructions Importantes Relatives à la Sécurité
Consultez attentivement cette notice d’installation et conservez-la pour toute référence future.
L’installation de ce produit doit être eectuée par un technicien professionnel! Ce document à l’intention des installateurs professionnels contient
les directives de pose et de sécurité relatives à ce produit en installation fixe ou dans des applications portables. Veuillez lire ce document, ainsi que
l’ensemble des avertissements de sécurité avant de procéder à l’installation.
AVERTISSEMENTS:
Tous les produits Bose
doivent être installés dans le respect des réglementations professionnelles, locales et nationales. L’installateur est
responsable du respect de tous les codes et règlements locaux et nationaux en vigueur applicables à l’installation et au montage des
enceintes. Consultez les autorités locales compétentes avant d’installer ce produit.
Tout montage non sécurisé d’une lourde charge peut provoquer des dégâts matériels et des blessures graves, voire la mort. Il en va de
la responsabilité de l’installateur d’évaluer la fiabilité de la méthode de montage utilisée, en fonction de l’application. Seul un installateur
professionnel connaissant les accessoires et techniques de montage adaptés est qualifié pour installer des enceintes suspendues.
ATTENTION:
Une fois installées, les systèmes d’enceintes doivent faire l’objet d’une inspection et d’un entretien préventif afin d’assurer
un fonctionnement en toute sécurité. Vérifiez que les composants et les points de fixation ne portent pas de traces de corrosion, de
déformations ou autre signe de détérioration de leur intégrité structurelle. Remplacez immédiatement tout composant usé ou endommagé.
Toute modification non autorisée peut compromettre votre sécurité, le respect des réglementations et le bon fonctionnement de l’appareil,
et en invalidera la garantie.
Ne connectez pas plus de 24modules ShowMatch complets ou 18 caissons de bassesShowMatch au moyen du système de suspension
intégré. Veuillez vous reporter à l’étiquetage des produits pour connaître les limites de charge.
Note: Toujours utiliser le logiciel Bose Modeler
ou «Bose Array Tool» pour confirmer les limites sécuritaires d’accrochage ainsi que configurations, angles
d’orientation et points de connexion.
Instruction d’installation et de configuration du module d’enceintes ShowMatch
Les directives d’installation contenues dans le présent document ne représentent que des conseils généraux et, à ce titre, ne présentent pas tous les
critères et précautions de rigueur. En conséquence, toute personne utilisant ce document assume seule l’entière responsabilité de la sécurité d’installation
de toutes les enceintes et de la configuration pratique de leur montage.
Avant l’installation d’un système portable ou d’une enceinte suspendue, il est nécessaire de faire approuver par un professionnel dûment autorisé
l’emplacement et la méthode de fixation à la structure du bâtiment et de lui faire confirmer que cette fixation est conforme au code du bâtiment et aux
réglementations. Il est important de s’assurer que la surface de montage et la méthode de fixation des enceintes à cette surface sont adaptées au poids
total du système. Par sécurité, il est recommandé de respecter un rapport de poids de 10:1.
Tous les composants du système de montage doivent provenir d’un fabricant de bonne réputation. Le système de montage choisi doit être adapté aux
enceintes et à l’utilisation prévue. Il est recommandé d’utiliser les accessoires de montage Bose disponibles. Faire contrôler par un professionnel qualifié la
conception et la fabrication des accessoires de montage sur mesure.
Le module d’enceintes Array Bose ShowMatch est doté d’un système de suspension par goupilles «quick pin» intégré, destiné à en faciliter le montage
par un installateur professionnel. Les connexions entre modules doivent être réalisées uniquement au moyen des barres de suspension intégrées, avec les
goupilles «quick pin» résistantes à la charge fournies ou en option. Veillez à ne pas utiliser de fixations dont la classe de résistance à la charge n’est pas
indiquée.
Ne pas utiliser les poignées de transport des enceintes comme points de suspension. Ces poignées ne sont pas conçues pour supporter une charge
permanente!
Fixer un câble de sécurité, attaché séparément au coret de l’enceinte, en un point autre que les points de fixation du système de montage de l’enceinte.
Cette mesure est recommandée, même si elle n’est pas imposée par la réglementation locale. Pour la conception et la réalisation de l’installation, consulter
un professionnel agréé.
Ne monter sur le système en aucune circonstance.
PRO.BOSE.COMPRO.BOSE.COM
6 7
SM5
ShowMatch SM5 full-range array modules provide
5° nominal vertical coverage with included changeable
waveguides oering choice of 70° or 100° horizontal
coverage with optional accessory 55° waveguides.
SM5 modules oer suspension overlap angle adjustment
from 0 to 5°, in 1° increments, to provide increased throw
distance and SPL.
SM10
ShowMatch SM10 full-range array modules provide
10° nominal vertical coverage with included changeable
waveguides oering choice of 70° or 100° horizontal
coverage.
SHOWMATCH SYSTEM COMPONENTS
SM20
ShowMatch SM20 full-range array modules provide 20°
nominal vertical coverage with included changeable
waveguides oering 70° or 100° horizontal coverage and
optional accessory 120° waveguides.
SMS118
ShowMatch SMS118 subwoofers are designed to integrate
with DeltaQ array loudspeakers and extend low-frequency
response down to 29 Hz. The SMS118 enclosure width and
integrated suspension allows fast integration in arrays with
ShowMatch full-range modules using optional array frames
and accessories. The portable-rated Baltic Birch enclosure
may also be used for ground-stack applications.
All ShowMatch System modules can be deployed for both fixed installation and portable/rental applications — from
small clubs and houses of worship to outdoor concert venues to performing arts centers and corporate AV productions.
ShowMatch DeltaQ arrays deliver more consistent coverage over a wide frequency range with outstanding vocal and
musical clarity. Each two-way module requires two channels of amplification and associated DSP to provide full-range
response from 59Hz–18 kHz.
Tour-sound output level — 4x Bose EMB2S compression drivers, improved with more HF output, and 2x8-inch
neodymium high-power woofers allow array output up to 145 dB SPL
1
.
Three-point “quick-pin” suspension — Fast, easy setup of up to 24 full-range modules with a 10:1 safety factor.
Side suspension guards/handles are easily removed for permanent installations, reducing width and creating a
cleaner visual appearance.
2
Changeable waveguides for the creation of DeltaQ arrays, or arrays with asymmetrical horizontal coverage.
Wichtige Sicherheitshinweise
Bitte lesen Sie diese Montageanleitung sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf.
Dieses Produkt darf nur von fachkundigen Monteuren installiert werden! Dieses Dokument soll fachkundigen Monteuren grundlegende Installations-
und Sicherheitsrichtlinien für dieses Produkt in mobilen und festinstallierten Anwendungen bieten. Bitte lesen Sie dieses Dokument und alle
Sicherheitshinweise vor der Installation durch.
WARNUNG:
Alle Produkte von Bose müssen gemäß lokalen und gesetzlichen Vorschriften sowie gemäß allen Branchenbestimmungen installiert werden.
Der Monteur ist dafür verantwortlich, sicherzustellen, dass die Installation der Lautsprecher und der Halterung gemäß allen geltenden
Vorschriften durchgeführt wird, einschließlich örtlicher Bauvorschriften und -bestimmungen. Wenden Sie sich vor der Installation dieses
Produkts an die zuständige abnehmende Behörde.
Eine unsichere Befestigung schwerer Lasten oder deren Aufhängung über Kopf kann zu schweren oder tödlichen Verletzungen und
Sachschäden führen. Der Monteur ist dafür verantwortlich, die Zuverlässigkeit der für die Anwendung verwendeten Befestigungstechniken
zu prüfen. Nur fachkundige Monteure mit Wissen über sachgemäße Befestigungselemente und sichere Befestigungstechniken sollten
Lautsprecher über Kopf installieren.
VORSICHT:
Installierte Lautsprecher erfordern regelmäßige Überprüfung und Routinewartung, um die ordnungsgemäße Funktion und den sicheren
Betrieb zu gewährleisten. Überprüfen Sie die Befestigungselemente und das Zubehör auf Anzeichen von Korrosion, Verbiegen oder andere
Anzeichen, die die mechanische Stabilität verringern können. Ersetzen Sie abgenutzte oder beschädigte Teile sofort.
Keine nicht autorisierten Veränderungen am Produkt vornehmen. Diese können die Sicherheit, die Einhaltung von Richtlinien und die
Systemleistung beeinträchtigen. In diesem Fall kann die Garantie ungültig werden.
Nutzen Sie das integrierte Array-Verankerungssystem niemals für mehr als 24ShowMatch Fullrange-Module bzw. 18ShowMatch
Subwoofer-Module. Angaben zur zulässigen Traglast entnehmen Sie bitte dem Typenschild.
Anmerkung: Verwenden Sie immer die Bose Modeler
Software oder die “Bose Array Tool” Software, um die sicheren Lastbedingungen (Safe Working
Load Limit) für eine Array-Konfiguration mit gegebenen Neigungswinkeln und Verbindungspunkten zu ermitteln.
Richtlinien für die Montage und Inbetriebnahme von ShowMatch Array Modul Lautsprechern
Die in diesem Dokument enthaltenen Installationsinformationen sind nur eine allgemeine Richtlinie und können daher nicht alle Anforderungen und
Vorsichtsmaßnahmen darstellen. Demgemäß übernimmt jeder, der dieses Material verwendet, die gesamte Haftung und ist ausdrücklich verantwortlich für
die Sicherheit aller Lautsprecher-Array-Designs und deren Montagetechniken, die in der Praxis eingesetzt werden.
Vor der Installation oder temporären Inbetriebnahme von Lautsprechern über Kopf muss ein zugelassener fachkundiger Techniker den Ort und die Art der
Befestigung an der Gebäude- bzw. Trägerstruktur prüfen und bestätigen, dass diese allen Bauvorschriften und Bestimmungen entspricht. Vergewissern
Sie sich, dass die Befestigungsfläche und die Art und Weise der Befestigung des Lautsprechersystems an der Fläche geeignet ist, das Gesamtgewicht des
Systems zu tragen. Es wird ein Sicherheitsfaktor von 10:1 empfohlen.
Beschaen Sie sich alle Komponenten der Halterung von zertifizierten Herstellern. Wählen Sie eine Halterung, die für Ihr Lautsprechersystem und die
beabsichtigte Anwendung geeignet ist. Wir empfehlen Befestigungszubehör von Bose, sofern verfügbar. Ein zugelassener fachkundiger Techniker muss
die Auslegung und die Herstellung der benutzerspezifischen Befestigungselemente überprüfen.
Bose ShowMatch Array Modul Lautsprecher verfügen über integrierte Montagepunkte mit Schnellverschlüssen, was die Installation des LautsprecherArrays durch fachkundige Monteure erleichtern soll. Die Module dürfen untereinander ausschließlich mit den integrierten Verbindungsstangen sowie den
im Lieferumfang enthaltenen bzw. optional erhältlichen und für die Last zugelassenen Schnellverschlüssen verbunden werden. Nicht gekennzeichnete
(nicht für das Tragen von Lasten geeignete) Befestigungselemente dürfen nicht verwendet werden.
Hängen Sie die Lautsprecher nicht mithilfe von Grien als Befestigungspunkte auf. Grie sind NICHT als Montagepunkte vorgesehen.
Bringen Sie ein zusätzliches Sicherungsseil an der Box an. Verwenden Sie hierzu nicht die tragenden Befestigungspunkte, die die Halterung mit dem
Lautsprecher verbinden. Wir empfehlen diese Sicherheitsmaßnahme auch dann, wenn diese von den örtlichen Behörden nicht vorgeschrieben ist. Wenden
Sie sich wegen der sachgemäßen Auslegung und Installation an einen zugelassenen fachkundigen Techniker oder ein Fachunternehmen.
Besteigen Sie unter keinen Umständen das Array.
SM5 Accessory Waveguide
The horizontal coverage pattern of ShowMatch
full-range loudspeakers can be changed by
replacing the factory-installed waveguides
with the optional accessory waveguides. The
SM5WG55 waveguide provides 55° horizontal
coverage for
the SM5 loudspeaker.
SM20 Accessory Waveguide
The horizontal coverage pattern of ShowMatch
full-range loudspeakers can be changed by
replacing the factory-installed waveguides with
the optional accessory waveguides. The
SM20WG12 waveguide provides 120° horizontal
coverage for the SM20 loudspeaker.
1
Calculated Peak SPL of 24-module array.
2
Requires the use of short quick pins; Bose PN: 770304-0010.
PRO.BOSE.COMPRO.BOSE.COM
8 9
CONNECTIONS AND WIRING
AMPLIFICATION
1+
1 2+
2-
1+
1 2+
2-
1+
1 2+
2-
Grillemounted
NL4MP
Connector
1+
1 -
2+
2-
1+
1 -
2+
2-
1+
1 -
2+
2-
1+
1-
2+
2-
EMB2S
EMB2S
EMB2S
SM8
left
16 Ω 16 Ω
12 Ω
SM8 right
EMB2S
Grille-
mounted
NL4MP
Connector
}
12 Ω
}
Parallel
Parallel
Bi-Amp
LF+ 1+
LF- 1HF+ 2+
HF- 2-
Power Handling
LF: 450 W
HF: 100 W
Impedance
LF: 8 Ω HF: 6 Ω
Discrete
LF+ 1+
LF- 1Thru 2+
Thru 2-
Power Handling
LF: 750 W
Impedance
LF: 4 Ω
ShowMatch full-range modules require two (2) amplifier channels with external DSP active crossover filters (modules
contain no passive crossover network). Each module contains series-parallel connections of four (4) compression
drivers delivering nominal 6-ohm impedance, with a long-term power-handling rating of 100 watts and peak rating
of 400 watts. The low-frequency section contains parallel connections of two (2) woofers delivering nominal 8-ohm
impedance, with a long-term power-handling rating of 450 watts and a peak rating of 1800 watts.
ShowMatch subwoofer modules contain a single 18-inch woofer with nominal 4-ohm impedance, with a long-term
power rating of 750 watts and a peak rating of 3000 watts.
Full-range Modules
Subwoofer Module
Recommended Amplification for Rental and Production Applications
Bose Professional recommends the use of PowerSoft series amplifiers for rental and production applications.
The ShowMatch Tour Rack includes three PowerSoft x4D amplifiers as the standard building block for a variety
of system configurations.
(See Page 22 for additional information on the ShowMatch Tour Rack.)
NL4 Channel Breakout
3-box parallel
(Z min = 2.0 Ω)*
2 subs/channel parallel
(Z min = 2.0 Ω)*
3-module parallel
(Z min = 2.0 Ω)
2- subs/channel parallel
(Z min = 2.0 Ω)
Recommended Signal Processing for Rental and Production
Digital signal processing (DSP) equipment is required for infrasonic protection, crossover, equalization, and protection
limiting functions.
A set of presets is available for various system configurations and are supplied as part of the preset library with
PowerSoft Armonía software and Bose ControlSpace software. To select a preset within ArmoníaPlus software, use
one of the following two methods:
Within the ArmoníaPlus application workflow select the Design > Add workflow step to access the design workspace.
Select Add Speaker from the top menu and you are presented with the ArmoníaPlus preset library. Bose ShowMatch
presets can be found here.
Once the preset is selected, the new virtual loudspeaker is added to the workspace.
To load the preset into the amplifier you will need to assign the virtual loudspeaker to an amplifier within the
Design > Link area of the workflow. This process automatically loads the correct LF and HF preset equalization.
PRO.BOSE.COMPRO.BOSE.COM
10 11
LINK/ 1G
ACT
LINK/ 1G
NK/ 1
G
CT
LINK/
QBr
VBr
M
LF
HF
NL4
LINK/ 1G
ACT
LINK/ 1G
NK/ 1G
CT
LINK/
LINK/ 1G
ACT
LINK/ 1G
NK/ 1G
CT
LINK/
LF
HF
NL4
QBr
M
QBr
Recommended Amplification for Installed Applications
Bose Professional recommends the use of Bose PowerMatch PM8500 series amplifiers for applications where the
system will be permanently installed. Two configuration options are available:
Economy (-2.6 dB peak output in module LF)
This configuration is ideal for applications that do not require the full peak output of the LF section of the array to meet
customer SPL requirements. In this set up a single Voltage Bridged (VBr) channel is used to drive two LF sections and
a single Mono (M) channel is used to drive two HF sections within the array. A single Quad Bridge (QBr) channel is used
for each SMS118 subwoofer.
Performance
In this configuration, full peak power is delivered to the LF section of the array. This configuration is recommended for
live music performance venues.
In this configuration, a single Quad Bridge (QBr) channel is used to power two LF sections and a single Mono (M)
channel is used to power two HF sections of the array.
The SMS118 is powered by a single Quad Bridge channel.
PRO.BOSE.COMPRO.BOSE.COM
12 13
Mid-band (1-4 kHz) coverage for traditional array with fixed
vertical and horizontal angles. To provide a consistent level across
the coverage area, the input to individual modules varies.
Traditional Line Array with Fixed Horizontal Angles DeltaQ Array
Mid-band (1-4 kHz) coverage for a ShowMatch DeltaQ array. In
this case the horizontal and vertical coverage vary across the
length of the array. A consistent level across the audience area
is achieved with acoustic gain rather than drive level from
the amplifier.
DESIGNING SHOWMATCH SYSTEMS
System Concept
ShowMatch systems feature next-generation array technology to deliver the scalability and flexibility needed to support
live music reproduction in a variety of venue shapes and sizes. Each ShowMatch array module includes two eight-inch
high-power neodymium woofers and four proprietary EMB2-S compression drivers capable of delivering array output
up to 145 dB SPL
1
.
Available in three vertical angles of 5, 10 and 20-degrees, each ShowMatch array module features changeable horizontal
waveguides that can be preconfigured to create both standard and DeltaQ line arrays.
DeltaQ line arrays provide consistent coverage and tonality across the coverage area by utilizing loudspeaker directivity,
Q, rather than electronic gain and module splay angles. This concept is particularly useful in installed applications where
the system designer’s intent is to fine tune the coverage of the array to the shape of the audience area. Optimizing
the coverage of the array further improves performance by reducing unwanted room reflections which cause an
inconsistent response and drive reverberation, reducing both speech and musical clarity.
ShowMatch array modules are oered in three vertical and four horizontal coverage patterns which can be configured
as shown in the following table:
Available Horizontal Angles
55° 70° 100° 120°
SM5 Accessory Pre-installed Included with module NA
SM10 NA Included with module Pre-installed NA
SM20 NA Included with module Pre-installed Accessory
Using the various module configurations, it is possible to create a system design which focuses the energy on the
audience and minimizes the energy placed on side walls. The following illustration compares a ShowMatch DeltaQ line
array to a traditional line array comprised of modules which use the same vertical and horizontal angle.
1
Calculated peak SPL for a 24 module array.
Recommended Signal Processing for Permanent Installations
The Bose PowerMatch PM8500N power amplifier (sold separately) is easily configured to provide the recommended
amplifier power for ShowMatch modules and arrays. The PM8500N also provides presets for all recommended signal
processing, including active crossover, EQ, alignment delay, protection limiting, array compensation EQ settings, and
cardioid subwoofer settings when used with the ShowMatch SMS118 subwoofer.
Presets may be selected from either the front panel of the PM8500N or through the ControlSpace Designer software.
From the front panel interface select Menu > DSP > Speaker Presets > ShowMatch to access the loudspeaker preset
library for ShowMatch systems.
Within ControlSpace Designer, while connected to the amplifier via either USB or Ethernet, loudspeaker presets are
applied within the loudspeaker processing block of the output processing section for the desired channel.
1) Open the SpeakerPEQ block for the channel where the preset EQ will be applied
2) Select Load Loudspeaker EQ
3) Navigate to the ShowMatch directory to access the ShowMatch system presets.
ShowMatch systems utilize two preset components, a low frequency section, and a high frequency section. When
working with ControlSpace Designer or the front panel interface of the PowerMatch amplifier you will need to load the
preset for each section, (LF or HF), separately.
For additional information on system presets see Section 6.2, ShowMatch System Presets in this guide.
PRO.BOSE.COMPRO.BOSE.COM
14 15
50° vertical coverage
in both arrays
In rental and touring applications the DeltaQ concept oers the same consistency of coverage and response across the
coverage area, and in smaller, low-ceiling applications this concept can be used to deploy smaller arrays, which deliver
wide vertical coverage, as compared to arrays constructed of traditional line array modules.
A typical rental inventory includes all the fundamental components to build arrays of various sizes and output levels.
These components can be easily mixed and matched, transported, and configured for dierent applications.
Each array is comprised of three primary components:
Far Throw array sections are comprised of SM5 modules with a 70-degree horizontal coverage angle. The overall
size and throw distance required for the application will determine the quantity of modules configured in this way.
Mid Throw array sections constitute the main portion of the array and are comprised of SM5 modules with a
100-degree horizontal coverage angle.
Downfill Transition is the final section of the array and uses four modules to deliver 40 degrees of vertical coverage
to the nearest audience area. This is accomplished with two SM5 modules, one SM10 module, and one SM20
module, where all modules have a 100-degree horizontal coverage angle.
Typical ShowMatch array for outdoor concert supporting an audience of up to 5,000 people.
Far Throw 4x SM5 with 70° horizontal
Mid Throw 4x SM5 with 100° horizontal
Downfill 2x SM5, 1x SM10, 1x SM20, all
with 100° horizontal with 70° horizontal
In low-ceiling applications, a DeltaQ array can be
deployed to deliver an array with a wide vertical
coverage angle using fewer modules than traditional
systems. In applications where the SPL level can be met
with this approach, a DeltaQ array oers the following
advantages:
Reduced array weight
Improved sight lines
Reduced set-up and installation time
1
For a detailed technical explanation of DeltaQ arrays see the AES paper “The influence of the directional radiation performance of the
individual speaker modules, and overall array, on the tonal balance, quality and consistency of sound reinforcement systems,”
presented at the 131st AES Convention in New York City, October, 2011.
SYSTEM SOFTWARE
EASE Focus
EASE Focus 3 software allows 3D modeling of audience areas, predictions of acoustic direct-field coverage, sound
levels, and frequency response.
Once an array has been created, inter-box splay angles may be configured manually or using automated splay
calculation. SMS118 cardioid subwoofer presets are available within the software for the creation of cardioid
subwoofer arrays.
At the completion of the design a customizable report can be generated which contains the necessary details for
proper placement, aiming and configuration of array parameters.
The Bose ShowMatch GLL files are licensed to allow use in both Focus and “full” EASE software.
Loading...