Please read and keep all safety and use instructions.
Important Safety Instructions
1. To avoid accidental ingestion, keep the sleepbuds™ away from children and pets. The sleepbuds™ contain a
silver-zinc battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When
not in use, store the sleepbuds™ in the charging case with the charging lid closed, and keep out of the reach of
children and pets.
2. Do NOT allow children to use the sleepbuds™.
3. Clean the sleepbuds™ and charging case only with a dry cloth. For additional cleaning instructions,
see page 27.
4. Only use attachments/accessories specified by the manufacturer.
WARNINGS/CAUTIONS
• When using this product, basic precautions should always be followed, including the following:
– Read all the instructions before using the charging case.
– To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
– Do not expose charging case to water, rain, liquids or snow.
– Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of
fire or injury to persons.
– Do not use the charging case in excess of its output rating.
– Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
– Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury to persons.
– Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or temperature
above 212° F, 100° C may cause explosion.
– Have servicing performed by a qualified repair person using only identical replacement parts.
• Do NOT use your sleepbuds™ at any time in which the inability to hear surrounding sounds may present a danger to
yourself or others. If engaging in any activity requiring attention to your surroundings (e.g., attending to children,
driving, riding a bicycle or walking in or near trac, a construction site or railroad, etc.), remove the sleepbuds™ or
adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
• Do NOT submerge the sleepbuds™ in water. Do NOT expose the sleepbuds™ to moving water (e.g., from a
faucet, etc.). Do NOT wear the sleepbuds™ while showering or bathing, or when participating in water sports,
e.g., swimming, waterskiing, surfing, etc.
2
ENG
|
IMPORTANT SAFETY INSTRUCTIONS
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might aect your
implantable medical device.
• Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases,
on or near the product.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles,
on or near the product.
• Do NOT make unauthorized alterations to this product.
• Use this product only with the power supply provided.
• The provided power supply has not been tested for use at altitudes greater than 2000 meters.
仅适用于 2000m 以下地区安全使用
Use at altitude less than 2000 meters only.
• If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made,
seek medical advice.
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
3
ENG
|
REGULATORY INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate
this equipment.
This device complies with part 15 of the FCC Rulesand with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: A94424611
IC: 3232A-424611
CAN ICES-3 (B)/NMB-3(B)
Bose Corporation hereby declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The
complete declaration of conformity can be found at: www.Bose.com/compliance
Frequency band of operation 2400 to 2483.5 MHz.
Maximum power spectral density less than 10 dBm/MHz EIRP.
This symbol means the product must not be discarded as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this product.
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by
the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter
original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If
found, the user shall cease operating immediately until no interference is achieved. The said legal communications
means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM
radio wave radiated devices.
DON’T attempt to remove the rechargeable batteries from this product. Contact your local Bose retailer or other
qualified professional for removal.
4
ENG
|
REGULATORY INFORMATION
Please dispose of used batteries properly, following local regulations. Do not incinerate.
Removal of the rechargeable batteries in this product should be conducted
only by a qualified professional. Please contact your local Bose retailer or see
http://products.bose.com/static/compliance/index.html for further information.
China Restriction of Hazardous Substances Table
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Lead
Part Name
PCBsXOOOOO
Metal PartsXOOOOO
Plastic PartsOOOOOO
SpeakersXOOOOO
CablesXOOOOO
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
(CR(VI))
Polybrominated
Biphenyl
(PBB)
Polybrominated
diphenylether
(PBDE)
Taiwan Restriction of Hazardous Substances Table
Equipment name: Bose noise-masking sleepbuds™, Type designation: 424611
Restricted substances and its chemical symbols
Unit
PCBs
Metal Parts
Plastic Parts
Speakers
Cables
Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value
of presence.
Note 2: The “−” indicates that the restricted substance corresponds to the exemption.
5
Lead
Mercury (Hg) Cadmium (Cd)
(Pb)
-○○○○○
-○○○○○
○○○○○○
-○○○○○
-○○○○○
Hexavalent
chromium (Cr+6)
ENG
|
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers (PBDE)
REGULATORY INFORMATION
Please complete and retain for your records
The serial number is located on the bottom of the charging case.
Serial number: ____________________________________________________________________
Model number: 424611
Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.
You can easily do this by going to http://global.Bose.com/register
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “8” is 2008 or 2018.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China
(Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
Phone Number: +886-2-2514 7676
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000
México, D.F. Phone Number: +5255 (5202) 3545
Input Rating: 5V 150mA
Charging temperature range: 41° F – 113° F (5° C – 45° C)
Discharging temperature range: 41° F – 113° F (5° C – 45° C)
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Bose Corporation is under license.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a
Try these solutions first ................................................................................................ 28
Other solutions ................................................................................................................ 28
8
ENG
|
BOSE SLEEP APP
Download the free Bose Sleep app, which you’ll need to control your sleepbuds™,
select masking sounds, manage wake-up alarms, adjust volume and configure
advanced settings.
FEATURES
• Select masking sounds to play through your sleepbuds™.
• Set wake-up alarms.
• Name your sleepbuds™.
• Find answers to frequently asked questions.
• Keep your sleepbuds™ up to date and try new features with the latest software.
9
ENG
|
STAY AWARE OF YOUR SURROUNDINGS
The sleepbuds™ are designed to mask noise and disturbances while you sleep.
Because of this, they can aect your ability to hear other sounds, such as alarms,
warning systems, people and pets.
SET AN APPROPRIATE VOLUME
To balance the levels of noise masking and awareness you want, set an appropriate
volume level for your needs. The volume should be high enough to mask noises that
are disturbing your sleep, but not so high that you can’t hear the sounds you want
to hear.
In the Bose Sleep app, set the volume to the lowest level, then increase it gradually
until you reach an appropriate level. The lower the volume, the more likely it is that
you’ll be able to hear the sounds you want or need to hear.
TIPS FOR MAINTAINING AWARENESS
If you’re concerned about your ability to hear sounds while wearing the sleepbuds™,
try the following tips.
Basic tips
• If you sleep with a partner, consider relying on your partner to help you stay aware
of your surroundings while wearing the sleepbuds™.
Advanced tips
These tips make the sleepbuds™ less eective at masking noise, but further increase
your awareness of your surroundings.
• Wear only one sleepbud™.
• Set your current masking sound so that it stops after a certain amount of time
instead of playing all night. You can do this by setting a sleep timer for your current
masking sound in the Bose Sleep app.
10 | ENG
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.