Bose ShowMatch DeltaQ SMAF, ShowMatch DeltaQ SMAFT, ShowMatch DeltaQ SMPULL Installation And Safety Manuallines

ShowMatchTM DeltaQTM Array Rigging Frames

Installation and Safety Guidelines

Important Safety Instructions

pro.Bose.com

Please read this installation guide carefully and save it for future reference.

This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic

installation and safety guidelines for this product in typical fixed-installation or portable-system applications. Please read this document and all safety
warnings before attempting installation.

WARNINGS:

• All Bose

• Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the

CAUTION:

• Installed loudspeaker arrays require regular inspection and routine maintenance to ensure proper function and

• Do not make unauthorized alterations to this product; doing so may compromise safety, regulatory compliance, system performance, and

NOTE: Always use Bose Modeler® or Bose Array Tool software to confirm safe working load limits with exact array configurations, pitch angles, and
connection points.

Guidelines for Installation and Setup of ShowMatch Array Module Loudspeakers

The installation information contained in this document is only a general guideline and cannot, as such, represent all requirements and precautions.
Accordingly, anyone using this material assumes all liability and is expressly responsible for the safety of all loudspeaker array designs and mounting
configurations applied in practice.

• Prior to the installation or portable-system setup of any overhead loudspeaker, a licensed professional engineer must approve the location and method

of attachment to the building structure or support-truss structure and confirm they are consistent with all building codes and regulations. Ensure the
mounting surface and the method of attaching the loudspeaker system to the surface is capable of supporting the total weight of the system. A safety
factor of 10:1 is recommended.

• Obtain all mounting system components from reputable manufacturers. Select a mounting system appropriate for your loudspeaker system and

its intended application. We recommend Bose mounting accessories when available. A licensed professional engineer must review the design and
fabrication of any custom mounting hardware.

• Do not suspend loudspeaker using handles as attachment points. Handles are NOT designed for load bearing!

• Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment points of the mounting system to

the loudspeaker. This is recommended even if not required by local regulation. Consult a licensed professional engineer or a rigging professional for
proper design and installation.

• Do not under any circumstances climb the array.

®

products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to
ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building
codes and regulations. Consult the local authority having jurisdiction before installing this product.

responsibility of the installer to evaluate the reliability of any mounting method used for their application. Only professional installers with
the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.

safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the
structural integrity. Immediately replace worn or damaged components.

may void the warranty.

2 - ShowMatchTM DeltaQTM Array Rigging Frames - Important Safety Instructions

pro.Bose.com

Introduction

Product Applications

Bose® ShowMatchTM array frames and rigging accessories are designed for use with ShowMatch DeltaQTM
Array loudspeakers (SM5, SM10, and SM20) and ShowMatch DeltaQ Array subwoofers (SMS118).

Not for use with non-ShowMatch loudspeakers.

Array Frame

Use the ShowMatch Array Frame (SMAF) to create overhead
suspended arrays that contain subwoofer modules, or to create
ground stack arrays that use any combination of subwoofer
modules, mid/high modules, or both.

T-Bar Array Frame

Use the ShowMatch T-Bar Array Frame (SMAFT) to create overhead
suspended arrays that contain mid/high modules only.

Do not use the T-bar Array Frame with arrays that contain subwoofer
modules or to create ground stack arrays.

Array Pullback Bracket

Connect the ShowMatch Array Pullback Bracket (SMPULL) to the
bottom full-range array module to provide third-point suspension
to building structure. This allows more extreme downward angle of
arrays than possible from 2-point, gravity-hang suspension.

Additional Product Information

For more information and complete installation instructions for ShowMatch DeltaQ loudspeaker modules
and compatible accessories, refer to the installation guide available at pro.Bose.com. To request a printed
copy, use the phone numbers provided in the Contact Information section of this guide.

Manufacturer Declaration

We hereby declare that the ShowMatch DeltaQ Array loudspeakers and accessories have been designed
and built in compliance with BGV C1 standards and technical specifications. This declaration shall cease to
be valid if alterations are made to the equipment without our prior agreement.

Installation Guide - ShowMatchTM DeltaQTM Array Rigging Frames - 3

Technical Information

Product Descriptions and Dimensions

ShowMatchTM Array Frame (SMAF)

Product Weight: 83.0 lbs (37.6 kg)
Product weight includes one shackle adapter. Each shackle adapter is 1.5 lbs (0.7 kg).

pro.Bose.com

Single Point, 10:1 Working Load Limit (in accordance with ANSI E1.8-2012)

ShowMatch Array Frame (SMAF)

Center Rail

WLL = 1800 lbs (815 kg)

ShowMatch Array Frame (SMAF)

Side Rail

WLL = 1400 lbs (630 kg)

4 - ShowMatchTM DeltaQTM Array Rigging Frames - Installation Guide