Bose MIE2 User Manual

BOSE® MIE2 MOBILE HEADSET

| | |

| |

Welcome

©2010 Bose Corporation. No part of this work may be reproduced, modified,
distributed, or otherwise used without prior written permission. All trademarks
referenced herein are property of Bose Corporation.

Large

(black)

Medium

(grey)

Small
(white)

Answer/End

button

Adjustment slider

Clothing clip

Carrying case

Mobile phone

adapters (2)

Microphone

(back of button)

StayHear™

tips

*Headset comes with medium

StayHear™ tips attached

left right

left right

left right

Thank you for purchasing the Bose® MIE2 mobile headset.
The Bose® MIE2 mobile headset offers a combination of lifelike
audio and communications performance and comfortable fit not
available from most conventional earbuds.

Register your product

Now is a good time to register your headset. You can do this
easily by going to http://global.Bose.com/register.

WARNING: DO NOT use mobile phone adapters to connect
headset to airplane seat jacks as this could result in personal injury
such as burns or property damage due to overheating. Remove
and disconnect immediately if you experience warming sensation
or loss of audio.

This product conforms to all EU Directive requirements as
applicable by law. The complete Declaration of Conformit y
can be found at www.Bose.com/compliance.

English

ENGLISH 1

English

Compatible with many music-enabled mobile phones. Refer to
the enclosed compatibility list or visit www.Bose.com/phones

for the latest list of compatible phones.

Device with

3.5 mm
headphone/
headset jack

Device with

2.5 mm
headphone/
headset jack

Connecting to a mobile phone or
audio device

You can connect the headset to your mobile phone with either
the 3.5 mm stereo plug (compatible with standard headphone
jacks) or by using one of the two included 2.5 mm adapter
cables if needed.

The correct connection should allow:

• Stereo sound to be heard during music playback and
communications

• Your voice to be heard by the person on the other end of a
phone call

• The Answer/End button to operate as expected

Without adapter

If your phone has a 3.5 mm
headphone/headset jack, you
do not need to use the included
adapters.

1. Plug the headset into the

headphone/headset jack on
the phone.

2. Put on the headset.

With adapter

The Bose® MIE2 mobile headset
includes two unique phone
adapters. Each is identified by a
small symbol (circle, triangle) on
the top of the plug.
If your phone has a 2.5 mm
headphone/headset jack, you
will need to use one of these
adapters.

1. Select the appropriate
adapter.

2. Attach the adapter to the
headset cable.

3. Plug the headset with the
adapter into the headphone/
headset jack on the phone.

4. Put on the headset.

Note: If your phone does not
respond when you press the
Answer/End button, you are
getting partial or no sound, or the
microphone is not picking-up sound, you may be using the wrong
adapter. Try the other adapter and check again. Refer to
www.Bose.com/phones to determine which adapter is
compatible with your phone.

2