Bose IE2 User Manual [ru]

BOSE® IE2 AUDIO HEADPHONES

| | |

| |

Welcome

Large

(black)

Medium

(grey)

Small

(white)

Adjustment slider

Clothing clip

Carrying case

StayHear™

tips

*Headphones come with medium StayHear™ tips attached

left right

left right

left right

12

Thank you for purchasing the Bose® IE2 audio headphones.
The Bose® IE2 audio headphones offer a combination of lifelike
audio performance and comfortable fit not available from most
conventional earbuds.

Register your product

Now is a good time to register your headphones. You can do this
easily by going to http://global.Bose.com/register.

This product conforms to all EU Directive requirements as
applicable by law. The complete Declaration of Conformity
can be found at www.Bose.com/compliance.

ENGLISH 1

English

Connecting to an audio device

You can connect the IE2 audio
headphones to any device with a standard

3.5 mm stereo plug (headphone jack).

Importance of Proper Fit

When you wear the headphones properly,
it provides the comfort and clarity you
expect from Bose

Fitting the headphones to your ear

The headphone earpiece has a soft StayHear™ tip attached,
allowing it to rest comfortably in the bowl of your ear. The wing
part of the tip fits just under your ear ridge.

Note: Each tip is marked with either an L or an R to
indicate which earpiece it is for. Be sure to attach the
left StayHear™ tip to the left earpiece and the right
StayHear™ tip to the right earpiece.

To determine if the tip is the right size:

1. Insert the earpiece into the canal just enough
for the headphone to rest lightly against your ear.

2. Tilt the headphone back and press the tip wing under the
ear ridge until it is secure.
The tips should fit comfortably yet securely in the bowl of
the ear.

®

.

English

12 3

StayHear™ tips

Changing ear tips

Select the type and size of eartip that provides you with the best
comfort and fit.

1. Gently peel the edges of the attached tip away from the
earpiece, using care not to tear the tip.

CAUTION: To prevent damage, do not pull on the
StayHear™ tip wing.

2. Position the opening of the new tip over the nozzle and the
small slot over the nozzle hook.

Note: Each tip is marked with either an L or an R to
indicate which earpiece it is for. Be sure to attach the
left StayHear™ tip to the left earpiece and the right
StayHear™ tip to the right earpiece.

3. Ease the base of the tip down around the base
of the earpiece until the tip feels secured.

Adjusting for comfort and stability

There are several ways you can adjust your headphones to
provide additional comfort and stability. Using the adjustment
slider and clothing clip you can customize how you wear your
headphones.

Using the adjustment slider

Move the adjustment slider up or down to reduce
or increase the amount of loose cord between the
left and right earpiece.

Using the clothing clip

Use the clothing clip to fasten the cable to
your clothing, for convenience, stability, and
to help manage the cable. This can be helpful
during high-movement activities or when
using the headphones in a single earpiece
configuration.

Cleaning

Your headphones may require periodic cleaning:

• Ear tips: First, remove them from the headphones and
wash the tips with a mild detergent and water. Make sure
you thoroughly rinse and dry them before putting them back
on the headphones.

• Headphone nozzles: Clean only with a dry, soft cotton swab or
equivalent. Never insert any cleaning tool into the nozzle.

2