Bose 423376 User Manual

BOSEbuild™ Headphones

Using your headphones without the app

The BOSEbuild Listen app includes step-by-step assembly instructions, as well as activities and tools that help you get the most out of your BOSEbuild headphones. Once you’ve ﬁnished building your headphones, refer to this guide for information about using the headphones without the Listen app.

Headphone controls and connections

Color button

Indicator lights

Volume up button

Multi-function button

Volume down button

Power/Bluetooth switch

Aux connector

Micro USB connector

Powering on

Slide the Power/Bluetooth switch forward. A voice prompt announces the battery level and any connected devices. The battery indicator glows according to the current charge level.

Powering o

Slide the Power/Bluetooth switch back.

Music controls

Volume up ( )

Multi-function ( )

Volume down ( )

Function What to do

Play/Pause Press

Skip Forward Double-press

Skip Back Triple-press

Fast Forward Double-press and hold the second press

Rewind Triple-press and hold the third press

Volume Up Press

Volume Down Press

Call controls

Function What to do

Answer or end a call Press

Decline an incoming call Press and hold for one

Answer a second incoming call and put the current call on hold

Decline a second incoming call and stay on current call

Switch between two calls With two active calls,

Create a conference call With two active calls, press

Mute or unmute a call While on a call, press +

Connecting to a mobile device

1. Slide the Power/Bluetooth button forward to the

symbol and hold it for two seconds. You hear “Ready to connect” and the Bluetooth light blinks blue.

2. On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in the Settings menu.)

3. Select your BOSEbuild headphones from your mobile device’s Bluetooth list.

The Bluetooth indicator glows solid white, and the voice prompt says, “Connected to <device name>.”

Note: When powered on, the headphones try to reconnect with the two most recently-connected devices. The devices must be powered on and within range (30 ft. or 9 m).

Using your headphones with multiple devices

Your BOSEbuild headphones can remember up to eight paired devices and can be actively connected to two devices at a time. If you pair a ninth device, the least recently used device will be deleted from the headphone’s memory.

Managing multiple connections

When two devices are actively connected, you can play music from either device. To switch between connected devices, pause the ﬁrst device and play music from the second.

Scrolling through other paired devices

To play music from a paired device that is not currently connected:

1. Slide the Power/Bluetooth button forward to the symbol and release to hear which device(s) are currently connected.

2. Slide the Power/Bluetooth button forward again within three seconds to connect to the next paired device.

3. Repeat step 2 until you hear the correct device name.

Note: To use this feature, voice prompts must be on.

second

While on a call, press once

While on a call, press and hold for one second

double-press

and hold for one second

and – simultaneously

Changing the headphone’s color

You can use the Color button on the left earcup to change the color of your headphones. Use the BOSEbuild Listen app to create your own color presets.

1. Press the Color button to switch between color presets.

2. Press and hold the Color button for three seconds to turn the LEDs o.

Charging your headphones

1. Plug the small end of the USB cable into the

micro-USB connector on the right earcup.

2. Plug the other end into a USB wall charger or computer that is powered on.

Note: During charging, the battery light blinks amber. When the battery is fully charged, the battery light glows green.

Charging time

Allow up to two hours to fully charge the headphones.

Notes:

Using the colored LED lights draws battery power more quickly than music listening alone.

A full charge powers the headphones for up to 15 hours of music listening, or up to 8 hours of music listening with LED lights.

Listening to music at high volume levels or using the LEDs at full brightness draws battery power more quickly.

Battery level

Each time you power on the headphones, a voice prompt announces the battery level. When the battery is nearly depleted, you hear “Battery low, please charge now.”

Indicator Lights

The Bluetooth and battery indicators are located on the right earcup.

Bluetooth light What it means

Blinking blue Ready to connect

Blinking white Connecting

Solid white Connected

Once the headphones are connected, the Bluetooth light turns o after 10 seconds. When the headphones are powered on, press any button to view the Bluetooth status.

Battery light What it means

Solid green Medium to full charge

Blinking amber Charging

Solid amber Low charge

Blinking red Need to charge

Solid red Charging error - contact

When not charging, the battery light turns o after 10 seconds. When the headphones are powered on, press any button to view the battery status.

Note: If the headphones are connected to an Apple device, the device displays the headphone battery level near the upper right corner of the screen and in the notiﬁcation center.

Voice prompts

Voice prompts guide you through the Bluetooth connection process, announce the battery level and identify connected devices. You can enable or disable voice prompts using the buttons on your headphones.

Tip: You can also manage voice prompt settings using the BOSEbuild Listen app.

Disable voice prompts

To disable voice prompts, press and hold + and – simultaneously until you hear, “voice prompts o.” Press and hold + and – again to re-enable voice prompts.

Note: Disabling voice prompts does not disable iOS or Android voice control.

Accessing voice control

When connected to an Apple or Android device, press and hold for one second. You hear a tone that indicates voice control is active. Press again to dismiss voice control.

Clearing the headphone’s memory

To clear the headphone’s memory of all paired devices:

1. Slide the Power/Bluetooth button forward to the symbol and hold it for 10 seconds, until you hear “Bluetooth device list cleared.”

2. Delete the BOSEbuild headphones from your mobile device’s Bluetooth list. All Bluetooth devices are cleared, and the headphones are ready to pair.

Factory reset

To restore your headphones to factory default settings:

1. Make sure the headphones are powered on.

2. Press and hold the Color and Volume down buttons

for 10 seconds until the LEDs ﬂash green.

The headphones reset, the Bluetooth indicator light blinks blue, and you hear “Ready to pair.”

BOSEbuild customer service

OWNER’S GUIDE

Save this guide for after your headphones are complete!

Important Safety Instructions

Please read and keep all safety and use instructions.

WARNINGS/CAUTIONS

Do NOT use the headphones at a high volume for any extended period.

• To avoid hearing damage, use your headphones at a comfortable, moderate volume level.

• Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.

Do NOT use your headphones while driving or at any time the inability to hear surrounding sounds may present a danger to yourself or others.

Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near trac, a construction site or railroad, etc., and follow applicable laws regarding headphone use. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.

This product is intended for ages 8 and up.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your implantable medical device.

To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

Do NOT expose this product to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases, on or near the product.

Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles, on or near the product.

Do NOT make unauthorized alterations to this product.

Use this product only with an agency-approved power supplythat meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).

If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.

Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, ﬁre or the like).

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAN ICES-3 (B)/NMB-3(B)

Rated voltage: 5 Vdc

Rated current: 0.5 A

Charging temperature range: 0˚C to 45˚C

Discharging temperature range: -20˚C to 60˚C

BOSEbuild Headphones

Serial number:

Model number: 423376

BOSE CORPORATION THE MOUNTAIN FRAMINGHAM, MA 01701-9168 USA

This product is covered by a limited, one year warranty from Bose. For terms, please visit http://build.bose.com/docs or write to: BOSEbuild Support c/o Bose Corporation 100 The Mountain Road, Framingham, MA 01701

The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such mark by Bose Corporation is under license. Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android is a trademark of Google, Inc. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect speciﬁcally to iPod, iPhone, or iPad, respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may aect wireless performance.

805496-0010