Bose® 161™ Speakers
Owner’s Guide
Declaration of conformity
We, the offerer,
Bose Corporation, The Mountain
Framingham, MA 01701-9168 USA
acknowledge our sole responsibility, that the product,
Kind of equipment: Loudspeaker
Type designation: 161™ loudspeaker
in accordance with EMC directive 89/336/EC and article 10(1) of the
Directive, is in compliance with the following norm(s) or document(s):
Technical regulations: EN 50081-1, EN 50082-1
Accredited by Bose Corporation
1 May 2001
Bose Products B.V. Nic Merks,
Nijverheidstraat 8, Vice President, Bose Europe
1135 GE Edam, Manufacturer’s authorized
The Netherlands EU representative
2
Where to find …
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Placing your Bose® 161™ speakers . . . . . . . . . . . . . . . . . . . . . . 4
Choosing speaker cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing speaker cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting speaker cord to the speakers . . . . . . . . . . . . . . . . 5
Connecting speaker cord to your receiver or amplifier . . . . . . . 5
Testing speaker connections . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mounting your speakers on a wall . . . . . . . . . . . . . . . . . . . . . . . 6
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cleaning your speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Before you begin
Thank you for purchasing Bose 161 speakers. Their advanced design and
quality construction ar e in tended to pr ovide lon g-term lis tening enjoyment
in your home. Your 161 speakers are engineered to provide quality Bose
speaker performance from a simple, elegant design. Unique Bose technologies, including Stereo Everywhere
ated with much larger speakers.
®
, deliver performance usually associ-
English
For your records
Serial numbers are located on the label on the back of each 161 speaker.
Serial number s: __________________ and __________________ __
Dealer name: _____________________________________________
Dealer phone: _______________ Purchase date: _______________
We suggest you keep your sales receipt with this owner’s guide.
©2001 Bose Corporation. No part of this work may be reproduced, modified,
distributed or otherwise used without prior written permission.
3
Setup
Unpacking
Unpack the carton carefully. Save the carton and packing materials for possible later use. If either speaker appears damaged, do
not operate either one. Repack both speakers in the original car
ton and notify your authorized Bose® dealer immediately.
Placing your Bose 161™ speakers
Note: Your 161 speakers are magnetically shielded to prevent
interference wi th most television scre ens.
For best acoustic performance, place the left channel speaker on
the left side of the room and the right channel speaker on the
right, at least 5 feet (1.5 m) ap art. (Refer to the label on the back of
each speaker.) Make sure the back of each speaker is parallel to
the front wall.
For rear channel use in a home theater surround sound system,
put the speakers near the back of the room, behind or to the sides
of the listening area.
Attach the supplied self-adhesive feet to the bottom surface of
each speaker for greater stability (
-
Figure 1).
If you want to mount your speakers using the supplied wall
brackets, see “Mounting your speakers on a wall” on page 6.
Figure 1
Locations for attaching rubber feet to the bottom of the speakers
CAUTION: Do not install near any heat sources, such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Choosing speaker cord
Be sure to use the proper gauge (thickness) of speaker cord.
Standard zip cord (2-conductor, 18-gauge [0.75 mm
at electrical and hardware stores) works for most applications. If
the length of speaker wire extends more than 30 feet (9 m) from a
receiver or amplifier, refer to “Wire recommendations” on page 7
or contact your authorized Bose dealer for more information.
2
] wire found
CAUTION: Before making any connections, turn off your receiver
or amplifier and unplug it from the outlet (the AC power mains).
4
Preparing speaker cord
Speaker cord consists of two insulated wires. The insulation
around one wir e is st ripe d, coll ar ed, or ri bbed. This mark ed wir e is
always positive (+). The plain wire is always negative (–). These
correspond to the positive (red) and negative (black) terminals on
the back of each speaker, receiver, or amplifier. Be sure to connect
each wire to the proper terminal (+ to +, – to –).
Note: Be sure to cut enough cord to reach from the receiver to
each speaker.
At the ends of each cord, strip approximately 1⁄2 inch (1.3þcm) of
insulation from both wires. Twist the bare ends of each wire so
there are no loose strands.
Connecting speaker cord to the speakers
Locate the term inals on the back o f each s peaker. Depress the red
terminal button (
the button. Depress the black terminal button, insert the plain (–)
wire and release the button.
Figure 2
Making speaker wire connections
Figure 2), insert the marked (+) wire and release
Black (–)
Setup
Red (+)
Connecting speaker cord to your receiver or amplifier
Connect the left speaker cord to the left channel speaker output
of your receive r or amplifier. Attach the marked wire to the red (+)
terminal and the plain wire to the black (–) terminal. In the same
manner, connect the right speaker cord to the right channel
speaker output.
CAUTION: Make sure no loose strands of wire touch across terminals. This could create a short circuit that can damage an amplifier
or receiver. Secure any loose wires befor e you pl ug in the recei ver
or amplifier.
Note: If these speakers are used for the rear surround channels in
a home theater system, choose the “SMALL SPEAKER” setting.
5
Setup
Testing speaker connections
1. Center the balance contr ol on your receiver or amplifier. Set it for MONO, if you have that option, and turn it on.
2. Place the 161™ speakers less t han 6 in ches (1 5 cm) ap ar t, facing each other.
3. Play some deep bass passages of music.
The sound should seem to come from a point between the two
speakers. The ba ss s ho uld be fu ll an d n atu ral . If n ot , you r co nn ec
tions may be reverse d, causi ng the speak ers to pl ay out of phase .
To correct the problem, make sure the speaker wires are con
nected + to + and – to –. Then repeat steps 1 – 3.
Mounting your speakers on a wall
See the back pages of t his gu ide for a mo untin g tem plate an d
mounting hardware information.
CAUTION: Do not mount the brackets on surfaces that are not
sturdy enough, or that have hazards concealed behind them, such
as electrical wire or plumbing. If you are unsure about installing the
bracket, contact a qualified professional installer.
CAUTION: Do not hang items from the brackets or speakers. The
brackets were designed to support the weight of the speakers only.
-
-
Figure 3
Speaker-bracket installation
Note: For vertical mounting, mount part A with the hole for screw
C at the bottom. Be sure to tighten all screws.
Note: For Stereo Everywhere® speaker performance, horizontal
mounting is required.
1. Hold the mounting template in position and mark holes for the mounting hardware. If you plan to feed wires through the wall, mark the speaker wire pilot hole also.
2. Drill holes for the chosen mounting hardware.
3. Mount bracket part A to the wall and mount bracket part B to
the rear of the speaker (
4. Secure the speaker with bracket part B to bracket part A using screw C. To adjust the angle, loosen screw C slightly, move the speaker up or down, and retighten screw C.
A
C
Figure 3).
B
6
Reference
Cleaning your speake rs
Use a damp cloth to clean your 161™ speakers. Do not use harsh chemicals or
household cleaners. Do not apply liquids directly to the speakers. If you vacuum the
front grille of the speakers, do so carefully.
Troubleshooting
If you experience problems with your 161 speakers, the following suggestions may
help. If you need additi onal help, contact your authorized Bose
®
dealer, or contact
Bose directl y.
Problem What to do
Neither speaker
plays
Bass or treble is
weak
Only one speaker
plays
One speaker still
does not play
Check the settings on your receiver or amplifier. Refer to the owners
guide that came with it for in struction on settings.
Check the tonal balance setti ng on your receiver or amplifier.
• Check the balance control on your receiver or amplifier.
• Check the wires connected to the speaker that does not play. Make
sure the wires are in good condition and are firmly connected. See
page 5.
• Disconnect the wires from both the speaker and the receiver or
amplifier. Disconnect the other cord from its speaker, and connect
that end of the cord to the speaker that doesn’t play.
• If the speaker still doesn’t play, the problem is in the speaker. If the
speaker now plays, continue checking for the source of the problem.
• Disconnect the same cord from the amplifier or receiver. Connect it
to the other outputs on the amplifier or receiver.
• If the speaker plays, the problem is in the original cord that was connected to that speaker. If the speaker does not play, the problem is in
that channel of the receiver.
Technical information
Quality standard: Syncom® computer quality control
Driver complement: Two (2) 2.5" (6.3 cm) wide-range drivers per speaker
Enclosure: Tuned port, molded ABS resin
Dimensions: 4.17"H x 10.93"W x 4.98"D (10.6 cm x 27.8 cm x 12.6 cm)
Compatibility: Rated 50W IEC; compatible with amplifiers or receivers rated 10-100
watts per channel, rated 4-8 ohms
Wire recommendations: Based on a maximum frequency response deviation of
±0.5 dB.
Gauge Length
18 (0.75 mm2) 30 ft (9 m) maximum
16 (1.5 mm2) 45 ft (14 m) maximum
14 (2.0 mm2) 70 ft (21 m) maximum
Weight: 8 lbs. (3.6 kg) per pair, in the carton
7
Reference
8
©2004 Bose Corporation
The Mountain, Framingham, MA 01701-9168 USA
257524-ENGvo AM Rev.00
Loading...