Bosch WAX32GH1GB Installation manual
Register |
your |
||
new |
|
||
|
|
||
device |
|||
MyBosch |
|
on |
|
now |
|||
|
|||
getfree |
|
and |
|
benefits: |
|||
bosch |
|
|
|
-home |
|||
|
.com/ |
||
welcome |
|||
Washing machine
WAX32GH1GB
[en] User manual and installation instructions
en |
|
Table of contents |
|
Safety ............................................... |
4 |
General information ........................... |
4 |
Intended use...................................... |
4 |
Restriction on user group................... |
5 |
Safe installation.................................. |
5 |
Safe use ............................................ |
7 |
Safe cleaning and maintenance ......... |
9 |
Preventing material damage........... |
11 |
Environmental protection and |
|
saving energy ................................. |
11 |
Disposing of packaging ................... |
11 |
Save energy and conserve re- |
|
sources ........................................... |
12 |
Energy saving mode ........................ |
12 |
Installation and connection ............ |
12 |
Unpacking the appliance ................. |
12 |
Contents of package........................ |
13 |
Requirements for the installation |
|
location............................................ |
13 |
Removing the transit bolts ............... |
14 |
Removing the transport struts .......... |
15 |
Connecting the appliance ................ |
16 |
Aligning the appliance ..................... |
17 |
Familiarising yourself with your |
|
appliance ........................................ |
19 |
Appliance ........................................ |
19 |
Detergent drawer ............................. |
20 |
Controls........................................... |
20 |
Display ............................................ |
21 |
Programmes.................................... |
24 |
Buttons ............................................ |
31 |
Operating logic ................................ |
33 |
Accessories.................................... |
35 |
Before using for the first time......... |
35 |
Starting an empty washing cycle...... |
35 |
Laundry .......................................... |
36 |
Preparing the laundry....................... |
36 |
Sorting laundry ................................ |
37 |
Degrees of soiling............................ |
37 |
Care symbols on the care labels...... |
37 |
Detergents and care products ........ |
38 |
Detergent recommendation.............. |
38 |
Detergent dosage ............................ |
38 |
Basic operation .............................. |
39 |
Switching on the appliance .............. |
39 |
Setting a programme ....................... |
39 |
Adjusting the programme settings.... |
40 |
Saving the programme settings ....... |
40 |
Loading laundry ............................... |
40 |
Using a measuring aid for liquid |
|
detergent ......................................... |
41 |
Adding detergent and care |
|
product............................................ |
42 |
Starting the programme ................... |
42 |
Adding laundry ................................ |
42 |
Cancelling the programme............... |
42 |
Resuming the programme when |
|
the programme status is Rinse |
|
Hold ................................................ |
43 |
Unloading the laundry...................... |
43 |
Switching off the appliance .............. |
43 |
Childproof lock ............................... |
43 |
Activating the childproof lock ........... |
43 |
Deactivating the childproof lock ....... |
43 |
Home Connect ............................... |
44 |
Connecting the appliance to a |
|
WLAN home network (Wi-Fi) with |
|
WPS function ................................... |
44 |
Connecting the appliance to a |
|
WLAN home network (Wi-Fi) |
|
without WPS function ....................... |
45 |
Connecting your appliance to the |
|
Home Connect app ......................... |
46 |
Connecting the appliance to the |
|
energy manager .............................. |
46 |
Activating Wi-Fi on the appliance ..... |
47 |
2
Deactivating Wi-Fi on the appli- |
|
ance ................................................ |
47 |
Software update............................... |
47 |
Resetting the appliance network |
|
settings............................................ |
47 |
Remote diagnostics ......................... |
47 |
Data protection ................................ |
47 |
Declaration of Conformity................. |
48 |
Basic settings................................. |
48 |
Overview of the basic settings.......... |
48 |
Changing the basic settings............. |
49 |
Cleaning and servicing................... |
49 |
Tips on appliance care .................... |
49 |
Cleaning the drum ........................... |
50 |
Cleaning the detergent drawer ......... |
50 |
Descaling ........................................ |
51 |
Cleaning the drain pump.................. |
51 |
Cleaning the water outlet hose at |
|
the siphon........................................ |
53 |
Clean the water inlet filters. .............. |
54 |
Troubleshooting ............................. |
56 |
Error code / Fault display / Signal ... |
56 |
Malfunctions .................................... |
57 |
Noise............................................... |
59 |
Problem with results ........................ |
60 |
Home Connect problem................... |
61 |
Leakage .......................................... |
61 |
Odours ............................................ |
61 |
Emergency release .......................... |
62 |
Transportation, storage and dis- |
|
posal............................................... |
62 |
Removing the appliance .................. |
62 |
Inserting the transit bolts.................. |
62 |
Using the appliance again ............... |
63 |
Disposing of old appliance .............. |
63 |
Customer Service ........................... |
64 |
Product number (E-Nr.) and pro- |
|
duction number (FD)........................ |
64 |
Consumption values....................... |
65 |
en
Technical specifications................. |
65 |
3
en Safety
Safety
Please read the safety information to ensure that you use the appliance safely.
General information
You can find general information about this instruction manual here.
¡Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently.
¡This manual is intended for the installer and the user of the appliance.
¡Follow the safety instructions and warnings.
¡Keep the instruction manual and the product information safe for future reference or for the next owner.
¡Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.
Intended use
Read the information on intended use to ensure that you use the appliance correctly and safely.
Only use this appliance:
¡According to this installation and instruction manual.
¡For washing machine-washable fabrics and hand-washable wool in accordance with the care label.
¡With tap water and commercially available detergents and care products suitable for washing machines.
¡In private households and in enclosed spaces in a domestic environment.
¡Up to an altitude of max. 4000 m above sea level.
4
Safety en
Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Cleaning and user maintenance must not be performed by children unless they are being supervised.
Keep children under the age of 3 years and pets away from the appliance.
Safe installation
Take note of the safety instructions when installing the appliance.
WARNING ‒ Risk of electric shock!
¡Improper installation is dangerous.
Connect and operate the appliance only in accordance with the specifications on the rating plate.
Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical installation must be properly installed. The installation must have a sufficiently large cross section.
When using a residual current circuit breaker, only use a type with the 
mark.
Never equip the appliance with an external switching device, e.g. a timer or remote control.
When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations.
When installing the appliance, check that the power cable is not trapped or damaged.
5
en Safety
¡If the insulation of the power cord is damaged, this is dangerous.
Never let the power cord come into contact with hot appliance parts or heat sources.
Never let the power cord come into contact with sharp points or edges.
Never kink, crush or modify the power cord.
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-ap- proved adapters.
Do not use extension cables or multiple socket strips.
If the power cord is too short, contact Customer Service.
Only use adapters approved by the manufacturer.
WARNING ‒ Risk of injury!
¡The high weight of the appliance may result in injury when lifted.
Do not lift the appliance on your own.
¡If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall.
Only stack the dryer on a washing machine using the connection kit from the dryer manufacturer . No other installation method is permitted.
Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit.
Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack.
Do not install a washer-dryer stack on a platform; the appliances may tip over.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
Keep packaging material away from children.
Do not let children play with packaging material.
6
Safety en
CAUTION ‒ Risk of injury!
¡The appliance may vibrate or move when in use.
Place the appliance on a clean, even, solid surface.
Align the appliance using the appliance feet and a spirit level.
¡If hoses and power cords have been laid incorrectly, this causes a tripping hazard.
Lay hoses and power cords in such a way that there is no risk of tripping.
¡If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off.
Do not move the appliance by holding onto protruding parts.
CAUTION ‒ Risk of cutting!
Touching sharp edges on the appliance may lead to cuts.
Do not touch the sharp edges on the appliance.
Wear protective gloves when installing and transporting the appliance.
Safe use
Follow these safety instructions when using the appliance.
WARNING ‒ Risk of electric shock!
¡If the appliance or the power cord is damaged, this is dangerous.
Never operate a damaged appliance.
Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap.
Call Customer Service. → Page 64
Repairs to the appliance should only be carried out by trained specialist staff.
¡An ingress of moisture can cause an electric shock.
Only use the appliance in enclosed spaces.
7
en Safety
Never expose the appliance to intense heat or humidity.
Do not use steamor high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING ‒ Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.
Do not install the appliance behind a door as this may obstruct the appliance door or prevent it from opening.
With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING ‒ Risk of suffocation!
Children may breathe in or swallow small parts, causing them to suffocate.
Keep small parts away from children.
Do not let children play with small parts.
WARNING ‒ Risk of poisoning!
Detergents and care products may result in poisoning if consumed.
If accidentally swallowed, seek medical advice.
Keep detergents and care products out of the reach of children.
WARNING ‒ Risk of explosion!
Laundry that has been pretreated with cleaning agents that contain solvents may cause an explosion in the appliance.
Rinse pretreated laundry thoroughly with water before washing.
CAUTION ‒ Risk of injury!
¡The worktop may break if you stand on or climb onto the appliance.
Do not stand on or climb onto the appliance.
8
Safety en
¡The appliance may tip over if you sit on or lean against the open door.
Do not sit on or lean against the appliance door.
Do not place any objects on the appliance door.
¡Reaching into the drum while it is still turning may cause hand injuries.
Wait for the drum to come to a complete stop before reaching inside.
CAUTION ‒ Risk of burns!
When washing at high temperatures, the glass in the appliance door becomes hot.
Do not touch the appliance door when it is hot.
Keep children away from the appliance door when it is hot.
CAUTION ‒ Risk of scalding!
When you wash at high temperatures, the detergent solution gets hot.
Do not touch the hot detergent solution.
CAUTION ‒ Risk of chemical burns!
If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation.
Rinse eyes and/or skin thoroughly with clean water if they come into contact with detergents or care products.
If accidentally swallowed, seek medical advice.
Keep detergents and care products out of the reach of children.
Safe cleaning and maintenance
Take note of the safety instructions when cleaning and performing maintenance work on the appliance.
WARNING ‒ Risk of electric shock!
¡Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
9
en Safety
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
¡An ingress of moisture can cause an electric shock.
Do not use steamor high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING ‒ Risk of injury!
The use of non-original spare parts and non-original accessories is dangerous.
Only use the manufacturer's original spare parts and original accessories.
WARNING ‒ Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Do not use cleaning agents that contain solvents.
10
Preventing material damage
Follow these instructions to avoid material damage and damage to the appliance.
ATTENTION!
¡The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent.
Follow the dosage recommendations from the manufacturer.
¡Exceeding the maximum load capacity impairs the function of the appliance.
Observe the maximum load capacity → Page 24 for each programme and do not exceed it.
¡The appliance is secured for transportation using transit bolts. Transit bolts which have not been removed may result in material damage and damage to the appliance.
Before starting up the appliance, remove the transit bolts completely and keep them in a safe place.
Before transport, fit the transit bolts fully in order to prevent damage in transit.
¡If the water pressure is too high or too low, this may impair functioning of the appliance.
Make sure that the water pressure in the water supply system is min. 100 kPa (1 bar) and max.
1000 kPa (10 bar).
If the water pressure exceeds the maximum value specified, a pres- sure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
Preventing material damage en
¡Modified or damaged water hoses may result in material damage and damage to the appliance.
Never kink, crush, modify or cut through water hoses.
Only use the water hoses supplied with the appliance or genuine spare hoses.
Never re-use water hoses that have been used before.
¡Unsuitable cleaning products may damage the surfaces of the appliance.
Do not use harsh or abrasive detergents.
Do not use cleaning products with a high alcohol content.
Do not use hard scouring pads or cleaning sponges.
Clean the appliance with nothing but water and a soft, damp cloth.
Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.
Environmental protection and saving energy
Help protect the environment by using your appliance in a way that conserves resources and by disposing of reusable materials properly.
Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by type and dispose of them separately.
Information about current disposal methods are available from your specialist dealer or local authority.
11
en Installation and connection
Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and less water.
Do not exceed the programme's maximum load capacity → Page 24.
A higher load capacity extends the programme duration and increases energy consumption.
Use the programme's maximum load capacity → Page 24.
The energy and resource consumption is the most efficient.
Use the economy programme settings.
If you adjust the programme settings for a programme, the display shows the expected consumption.
Add → Page 38 detergent based on the laundry's degree of soiling.
For light to normal soiling, a smaller amount of detergent is sufficient. Observe the dosage recommendation from the detergent manufacturer.
Reduce the washing temperature for lightly and normally soiled laundry.
At low temperatures, the appliance consumes less energy. For light to normal soiling, lower temperatures than indicated on the care label are also sufficient.
Set the maximum spin speed if you want to dry the laundry in a tumble dryer afterwards.
The drier the laundry, the shorter the programme duration when drying which, in turn, reduces energy consumption.
Wash the laundry without prewash.
Washing with prewash increases the programme duration and increases energy and water consumption.
The appliance has a continuous automatic load adjustment function.
Depending on the type of fabric and load capacity, the continuous automatic load adjustment function optimally adjusts the water consumption and programme duration.
Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. All displays go out and Start / Reload 
flashes.
Energy-saving mode ends when you use the appliance again, e.g. if you open or close the door.
If you do not use the appliance for an extended period, the appliance switches off automatically.
Installation and connection
You can find out where and how best to install your appliance here. You will also learn how to connect the appliance to the water and power supply.
Unpacking the appliance
1.Remove any packaging and protective covers completely from the appliance.
2.Check the appliance for visible damage.
12
3.ATTENTION! Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance.
Installation and connection en
Remove these objects, along with all supplied accessories, from the drum before starting the appliance.
Open the door and remove the accessory from the drum.
Contents of package
After unpacking all parts, check for any damage in transit and completeness of the delivery.
|
1 |
1 |
Washing machine |
2 |
Accompanying documents |
3 |
Water inlet hose |
4 |
Cover caps |
4
2 3
Requirements for the installation location
The appliance may "wander" when it spins. Observe the instructions for the installation location.
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
13
en Installation and connection
WARNING
Risk of electric shock!
The appliance contains live parts. Touching live parts is dangerous.
Do not operate the appliance without a cover cap.
WARNING Risk of injury!
When using the appliance on a base, the appliance may tip over.
Always secure the feet of the appliance to a base using the manufacturer's fixing brackets → Page 35 before using the appliance for the first time.
ATTENTION!
¡If the appliance is installed in areas exposed to frost or outdoors, frozen residual water may damage the appliance and frozen hoses may crack or split.
Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoors.
¡The appliance underwent a function test before leaving the factory and may, therefore, contain residual water. This residual water may leak out if the appliance is tilted at an angle greater than 40°.
Tilt the appliance carefully.
Installation location |
Requirements |
On a base |
Secure the appliance |
|
with fixing brackets |
|
→ Page 35. |
Installation location |
Requirements |
On a wooden joist floor |
Place the appliance on |
|
a water-resistant |
|
wooden board which is |
|
screwed tightly to the |
|
floor. The wooden |
|
board should be at |
|
least 30 mm thick. |
In a kitchen unit
¡A niche width of 60 cm is required.
¡Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets.
On a wall |
Do not trap the hoses |
|
between the wall and |
|
the appliance. |
Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of the appliance.
Notes
¡Please read the safety information → Page 4 to ensure that you use the appliance safely.
¡Keep the transit bolts, screws and sleeves in a safe place for future transport → Page 62.
1. Pull the hoses out of the holders.
14
2.Unscrew 
and remove 
all four screws for the transit bolts with a WAF 13 wrench.
3.Pull the power cord out of the holder.
4. Remove the four sleeves.
Installation and connection en
5. Put on the four cover caps.
6. Press down on the four cover caps.
Removing the transport struts
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
1.Unscrew and remove the screws in the vertical transport struts using a T20 screwdriver.
15
en Installation and connection
2. Remove the transport struts.
3.Undo and remove the screws in the horizontal transport strut using a T20 screwdriver.
4. Remove the transport strut.
Connecting the appliance
Connect your appliance to the power supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
1. Connect the water inlet hose.
2.Connect the water inlet hose to a tap (26.4 mm = 3/4").
16
3.Open the water tap carefully and check that the connection points are tight.
Water outlet connection types
This information is intended to help you to connect this appliance to the water outlet.
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
ATTENTION!
When draining, the water outlet hose is subject to water pressure and may come loose from the installed connection point.
Secure the water outlet hose against unintentional loosening.
Drainage into a siphon. Secure the connection point with a (24–40 mm) hose clamp.
Drainage into a wash basin.
Fix and secure the water outlet hose with an elbow → Page 35.
Drainage into a plastic pipe with rubber sleeve or into a gully.
Fix and secure the water outlet hose with an elbow → Page 35.
Connecting the appliance to the electricity supply
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
1.Insert the mains plug of the appliance's power cable in a socket nearby.
Installation and connection en
The connection details of the appliance can be found under Technical data → Page 65.
2.Check the mains plug is inserted properly.
Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from moving, align the appliance correctly.
Note: Please read the safety information → Page 4 to ensure that you use the appliance safely.
1.Loosen the lock nuts using a WAF 17 wrench by turning it in a clockwise direction.
2.To align the appliance, turn the appliance feet. Check that the appliance is level using a spirit level.
All appliance feet must stand firmly on the ground.
3.Screw the lock nuts tightly against the housing using a WAF 17 wrench.
17
en Installation and connection
In doing so, hold the foot tight and do not adjust its height.
18
Familiarising yourself with your appliance en
Familiarising yourself with your appliance
Familiarise yourself with the parts of your appliance.
Appliance
You can find an overview of the parts of your appliance here.
3 |
4 |
5 |
6 |
7 |
|
|
|
|
|
|
|
2 |
8 |
8 |
1
On certain models, specific details such as the colour and shape may differ from those pictured.
1 |
Maintenance flap for the drain pump |
7 |
Transport struts → Page 15 |
|
2 |
→ Page 51 |
8 |
Transit bolts → Page 14 |
|
Door |
||||
|
|
|||
3 |
Detergent drawer → Page 20 |
|
|
|
4 |
Controls → Page 20 |
|
|
|
5 |
Water outlet hose → Page 17 |
|
|
|
6 |
Power cord → Page 17 |
|
|
19
en Familiarising yourself with your appliance
Detergent drawer
Below is an overview of the structure of the detergent drawer.
4
3
1 2
Controls
|
1 |
Measuring aid for liquid detergent |
|
|
|
→ "Using a measuring aid for liquid de- |
|
|
|
tergent", Page 41 |
|
|
|
Compartment II: |
|
|
2 |
||
|
|
¡ Detergent for main wash |
|
|
|
¡ |
Water softener |
|
|
¡ |
Bleach |
|
|
¡ |
Stain remover |
3 Compartment 
:
¡Fabric softener
¡Liquid starch
¡Waterproofing agent
4 |
Compartment I: |
¡Detergent for prewash
¡Hygiene detergent
The controls are used to configure all functions of your appliance and to obtain information about the operating status.
2 |
|
3 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
1 |
4 |
|
|
|
|
3 |
1 |
Programmes → Page 24 |
3 |
Buttons → Page 31 |
2 |
Programme selector → Page 39 |
4 |
Display → Page 21 |
20
Familiarising yourself with your appliance en
Display
The display shows the current settings, options or relevant information.
Example: Symbol display
Display |
Designation |
Description |
0:40 h 1 |
Programme duration/ |
Expected programme duration or programme time re- |
|
programme time remain- |
maining. |
|
ing |
|
10 1 |
"Ready in" time |
The programme end has been set and the remaining |
|
|
number of hours is displayed. |
|
|
→ "Buttons", Page 31 |
10 kg 1 |
Recommended load |
The maximum load capacity for the selected programme |
|
|
in kg. |
0 - 1600 |
Spin speed |
Set spin speed in rpm. |
|
|
→ "Buttons", Page 31 |
|
|
0 = No spin cycle, draining only |
– 90 °C |
Temperature |
Set temperature in °C. |
|
|
→ "Buttons", Page 31 |
|
|
(cold) |
|
Navigation |
Selecting settings. |
|
|
→ "Operating logic", Page 33 |
|
Other programme set- |
Activate, deactivate or adjust other programme settings. |
|
tings |
→ "Buttons", Page 32 |
|
Saving the programme |
Save a programme → Page 40. |
|
Other programmes |
Set other programmes → Page 39. |
1 Example |
|
|
21
Loading...