en-us Use and Care Manual, Installation Instructions
Washer
WAW285H2UC
Welcome to Your New Washer!
Congratulations on your selection of a new Bosch washer
for your laundry needs. We are confident you will enjoy the
superior performance and reliability.
Please do not hesitate to contact our Customer Service
department if you have any questions or comments with
your new washer.
Thank you for choosing Bosch.
Visit our website at www.bosch-home.com/us for more
information and to view a selection of our products.
2
Table of contents
en-us Use and Care Manual, Installation Instructions
Important information ................................................... 4
Purchase information ........................................................... 4
Customer service ................................................................. 5
Your washing machine is intended for ........................ 6
Additional information on products, accessories, replacement parts and services can be found at
www.bosch-home.com/us and in the online shop www.bosch-home.com/us/store
4XHVWLRQV"
ZZZERVFKKRPHFRPXV
0DLQ6WUHHW6XLWH
,UYLQH&$
:HORRNIRUZDUGWRKHDULQJIURP\RX
Important information
Purchase information
Please take a moment to record the following basic
information about your new Bosch washer.
This information will be helpful in the event you need to
contact Customer Service or would like to order
accessories or replacement parts.
(1U)'
The E-Nr. (model number) and the FD (serial) number
are found on the rating plate label.
see illustration
The model number includes the slash and a two digit
number (e.g. "/27"). Please be sure to include the final 2
digit number when filling in your model number. This
helps make sure any parts you may need are correctly
matched to your specific machine.
Date of Purchase:___/___/_____
Where Purchased:___________________________
The manufacturer reserves the right to make changes in
the product or manual without notification.
4
Customer service
Your washer does not require any special care other than
the maintenance and care mentioned in this manual. If
you have a problem with your washer, please consult.
~ Troubleshooting; Page 41
This may save you money. If a technician comes out to
advise you of information that is in the Troubleshooting
table you may be charged.
If problems persist and service becomes necessary,
contact your dealer, installer or an authorized service
center. Do not attempt to repair the appliance yourself.
Any work performed by unauthorized personnel may void
the warranty.
If you are having a problem with your washing machine
and are not pleased with the service you have received,
please follow these steps:
1.
Contact your installer or the Authorized Service
Provider in your area and explain to them why you are
not satisfied. This will usually correct the problem.
2.
If after working with your installer or service technician
the problem still has not been resolved to your
satisfaction, please let us know either by writing to us
at:
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
or calling us at:
1-800-944-2904
When writing or calling please have the following
information available:
▯ E-Nr. (model number, example: WAW285H2UC/01)
▯ FD (serial number, example: 9709|90007)
▯ Date of Original Purchase (receipt required)
▯ Date Problem Occurred
▯ Explanation of Problem
If writing, please also include a daytime telephone
number and a copy of the sales invoice.
When calling Customer Service, please be ready to
provide the model number E-Nr. and FD serial number.
This information will help provide the best support for
your washer.
Additional information is available at our website.
www.bosch-home.com/us
5
Your washing machine is intended for
▯ Only household use and in a non-commercial
environment.
▯ Use with machine washable textiles only.
▯ Washing with common cold and hot (maximum
140 °F/60 °C) tap water and commercially available
detergents and cleaning products suitable for use in
washing machines.
▯ We recommend HE (High Efficiency) detergents
because they are designed to deliver optimum
performance from your front-loading washer. Not
using HE detergent could cause problems such as
oversudsing, extended cycle periods, or a decrease
in wash performance.
NOTICE: Do not use chlorine bleach! ~ Operating
Instructions; Page 23
Safety Definitions
Important safety information is contained in this manual
and on the warning labels located on your washer.
Standard symbols and headings are used to identify
areas where you should take precautions to avoid injury
or damage. Please take a moment to become familiar
with each of these symbols and what they mean before
proceeding.
▯ When measuring all detergents/stain removers/
laundry care products be sure to follow the
manufacturer's instructions.
▯ Children must not do any laundry without supervision.
▯ Keep pets away from the washer.
▯ Set-up conditions:
Ambient temperature: 32-104 °F/0-40 °C
Relative humidity: under 95%
▯ Installation by qualified installers.
▯ Installation in accordance with all regulatory
requirements; if in doubt have the appliance installed
by a specialist familiar with these requirements.
Read the use and installation instructions and all other
information included with the washer and act
accordingly.
Keep all documents for future use.
9WARNING
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
9CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-observance of this
warning.
Tip: This symbol is used to draw the user's attention to
important matters.
6
9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY I NST RUCT I ONSREAD AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using appliances, basic safety precautions must
be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
SERIOUS INJURY OR DEATH WHEN USING YOUR
WASHING MACHINE, FOLLOW BASIC PRECAUTIONS
INCLUDING THE FOLLOWING
▯ Bosch washers are provided with an Use and Care and
Installation Instruction manual. Read and understand
all instructions before using the washing machine.
▯ Do not wash articles that have been previously
cleaned, washed, soaked, or spotted with gasoline, dry
cleaning solvents, other flammable or explosive
substances as they give off vapors that could ignite or
explode.
▯ Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
▯ Under certain conditions hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for this
length of time, turn on all hot water faucets and let the
water flow out of each faucet for several minutes before
using the washing machine. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame while carrying out
this procedure.
▯ Before the appliance is removed from service or
discarded, remove the door to prevent children from
playing or hiding inside. Also remove the power cord/
plug.
▯ Do not allow anyone to climb, lean or hang on any part
of the washer including any protruding components
such as the appliance door or a pullout shelf.
▯ Use caution when draining hot water from the washer
drum such as during pump maintenance or when using
the emergency door open procedure.
▯ Do not reach into the appliance if the wash drum is
moving.
▯ Do not tamper with the controls.
▯ Do not repair or replace any part of the appliance or
attempt any service unless specifically recommended
in the user manual or in Bosch published user repair
instructions that you understand and have the skills to
carry out.
▯ Always unplug the washing machine from the power
supply before attempting any service. Disconnect the
power cord by grasping the plug, not the cord.
▯ Do not machine wash fiberglass materials (such as
curtains and window coverings that use fiberglass
materials). Small particles may remain in the washing
machine and stick to fabrics in subsequent wash loads
causing skin irritation.
▯ Do not install or store the washer where it will be
exposed to the weather. Hoses and internal parts may
be damaged if exposed to freezing temperatures.
▯ Do not use the washing machine if it has a worn power
cord or loose plug.
▯ The washing machine must only be used for its
intended purpose.
▯ Always follow the fabric care instructions
recommended by the clothing manufacturer.
▯ Make sure all water connections to the washing
machine have shut-off valves that are readily
accessible during normal operation of the washer. Turn
off both valves during periods in which the washer is
not in use and before leaving for extended periods
such as vacations to reduce the risk of water damage
in the event of a leak. Turn the valves back on prior to
resuming use of the washer.
▯ Do not operate the washing machine if parts are
missing or broken.
▯ Do not operate the washing machine until you are sure
that:
▯ the washing machine has been installed according
to the Installation Instructions.
▯ all water, drain, power and grounding connections
are in compliance with all local regulations and/or
other applicable regulations and requirements.
▯ Certain internal parts are intentionally not grounded
and may present a risk of electric shock during
servicing. Service Personnel – DO NOT CONTACT the
following parts while the appliance is energized: inlet
valves, drain pump, heat sink of the motor controller,
PCBs.
▯ See the installation instructions in this manual for
grounding requirements.
~ Electrical connection; Page 18
7
9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY I NST RUCT I ONSREAD AND SAVE THESE INSTRUCTIONS
WARNING
WARNINGS FOR CHILDREN
▯ Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the
appliance is used near children.
▯ Make sure to utilize all child lock/safety features of your
appliance, and be sure to turn the appliance Off when
not in use.
▯ Appliances are not intended for use by children,
however when children become old enough to operate
the appliance, it is the responsibility of the parents or
legal guardians to ensure they are instructed in safe
practices by qualified persons.
▯ Keep all laundry aids (including detergents, bleach,
fabric softener, etc.) out of the reach of children.
WARNING
STATE OF CALIFORNIA PROPOSITION 65 WARNINGS
This product can expose you to chemicals including vinyl
chloride, which is known to the State of California to
cause cancer and birth defects or other reproductive
harm. For more information go to
www.p65warnings.ca.gov
SAVE THESE INSTRUCTIONS!
Keep these instructions for future reference and in case
of change of ownership, manual should be conveyed
with the washer.
8
Introduction to your new washer
9WARNING
RISK OF FIRE, ELECTRIC SHOCK OR INJURY
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY
INSTRUCTIONS of this manual before installing or
operating this appliance.
~ IMPORTANT SAFETY INSTRUCTIONS; Page 7
Standard features and helpful information
Thank you for choosing Bosch for your laundry
appliance needs.
Please read and follow the use and care, important
safety instructions and troubleshooting information
contained in this manual. Please retain this manual for
future reference.
Standard features
▯ 17.6 lb (8 kg) large drum capacity (for regular cotton
loads).
▯ Low washing and spinning noise levels.
▯ Large door opening featuring 180º opening angle.
Quality tested
Every Bosch washer is thoroughly tested before leaving
the factory. As a result, a small amount of residual water
may remain in the washer drum. We recommend running
the Drum Clean cycle to remove this water prior to
washing your first load of laundry.
~ Before loading your first load of laundry; Page 23
Website
Visit our website at www.bosch-home.com/us for more
information and to view a selection of our products.
About this manual
These operating and installation instructions may apply
to more than one model of washer. Illustrations used may
show details that differ from your particular model.
Read your user manual. It contains valuable information
about safety, installation and operation of your new
appliance.
This can save you time, make it easier to correctly install
and use your washer, and improve your overall
satisfaction with your new appliance.
Special features
▯ Load adjust matches the water and power
consumption to each program according to the
amount of laundry sensed in the drum and the type of
fabric.
The load adjust function runs automatically to keep
energy and water consumption as low as possible.
The water level sensor ensures the water level is
correct for the laundry and the program selected.
▯ The automatic unbalanced load detection system
spins the laundry several times to ensure even
distribution.
If the laundry is not evenly distributed, the spin speed
is reduced, or the laundry may not be spun for
reasons of safety.
In the Wool program, the spin cycle is attempted only
twice in order to prevent felting.
Environmentally friendly use of your
washer
Your new Bosch washing machine is designed to use
water, energy and detergent in a highly efficient way to
help reduce operating costs, conserve resources and
protect the environment.
▯ Utilize the maximum amount of laundry for the
appropriate program.
▯ Avoid using too much detergent.
▯ Wash normally soiled laundry without a prewash.
▯ Save energy and detergent when washing lightly and
normally soiled laundry.
▯ Information about the energy consumption:
The display provides information about the relative
energy consumption in the selected program.
The more indicator lamps light up, the higher the
program's consumption.
This enables you to compare the consumption levels
of the different programs when choosing your program
settings and to decide on an energy- and water-saving
program setting for the selected program.
▯ Energy-saving mode: The display panel lighting goes
out after a few minutes and Start/Pause flashes. To
activate the display, press any button.
Energy-saving mode is not activated if a program is
running.
If Wi-Fi is activated the appliance will not automatically
switch off (automatic switch-off function is
deactivated).
▯ If the laundry will be dried in a dryer afterwards, select
spin speed according to the dryer manufacturer’s
instruction.
9
Dimensions and clearances required
Appliance dimensions
E
D
F
G
LabelDimensionU.S.Metric
awidth23.6 in.60 cm
bdepth
(to front of door)
cheight (minimum*)
height (maximum*)
dside clearance
(door open 180°)
edepth
(door open 90°)
Weightapproximate gross164 lbs.77.2 kg
* height of appliance depends on the extension of the
height adjustable appliance feet.
H
25 in.64 cm
33.2 in.
33.8 in.
15.8 in.40 cm
42.5 in.108 cm
85 cm
86 cm
Length of power cord and water supply
hoses
To left of washer* To right of washer*
U.S.MetricU.S.Metric
Electric power
cord
Water supply
hoses
Drain Hose27 in.69 cm46 in.117 cm
* All distances are measured from indicated side when
facing front of washer.
40 in.100 cm55 in.140 cm
43 in.109 cm28 in.71 cm
Installation types
Stacked washer and dryer
A Bosch dryer of the same dimensions can be placed on
top of the washer to save space.
Use the special washer-dryer stacking kits (noted in
Bosch Dryer User Manuals) which can be purchased
from customer service or your local dealer.
%
(
+
)
*
&
$
'
Clearance requirements (Minimum)
A Both Sides0.6 in.1.5 cm
BTop6.3 in.16 cm
CRear*2.5 in.6.4 cm
DFront2.4 in.6.1 cm
* Rear clearance as close to wall as venting or water
connection will allow. For a stacked installation arrangement a greater rear clearance for the dryer venting is
required.
Ventilation area (Minimum)
ETop63 sq. in.404 sq. cm
FBottom63 sq. in.404 sq. cm
Vent spacing (actual not minimum dimensions)
G37 in.94 cm
H26 in.66 cm
J3 in.7.6 cm
K29 in.73 cm
10
Stand alone (shown) or Side-by-Side
Under counter (Less Desirable)
(
+
(
.
-
Under counter (Preferred)
)
$
*
)
&
$
'
If front of the appliance is covered ventilation openings
must be installed.
E & F are minimum area sizes
E63 sq.in.404 sq.cm
F63 sq.in.404 sq.cm
G & H actual spacing dimensions for min. open area
sizes
G3 in.7.6 cm
H14 in.35.6 cm
&
%
Front of the appliance fully open.
No doors or coverings.
Minimum opening dimensions
A28 in.71.1 cm
B23.8 in.60.5 cm
C35.5 in.90.2 cm
11
Installation instructions
9WARNING
RISK OF FIRE, ELECTRICAL SHOCK OR INJURY
TO PERSONS
To reduce the risk of fire, electric shock or injury to
persons, read the Important Safety Instructions at
the front of this manual before installing or operating
this appliance.
9CAUTION
WASHING MACHINE IS HEAVY
Use additional help and care when lifting and
positioning.
Introduction
Read these installation instructions completely and
carefully before starting to install your new washing
machine. The information contained can save you time
and effort and will help to ensure optimum performance
of your new washer. Be sure to observe all warnings and
cautions.
NOTICES
▯ Frozen hoses can tear or burst. Do not install the
washing machine outdoors or in an area exposed to
freezing conditions.
▯ If the washing machine is located in a room which will
be exposed to temperatures below freezing, or if it is
located in a cabin that is being shut down for the
winter, any residual water in the pump or water inlet
hose(s) must be drained.
▯ Take care not to damage the washing machine. Do
not hold on to protruding parts (e.g. door) when lifting.
Do not push against the appliance door glass due to
risk of damage.
▯ In addition to the safety information listed here, the
local water and electric authorities may have special
requirements that must be followed.
▯ If in doubt, have the appliance installed by an
authorized technician.
▯ Hidden surfaces may have sharp edges. During
service use caution when reaching inside the washer
housing.
Tools needed
The following tools may be helpful during installation of
your washer.
▯ 13mm socket for removing the transport bolts.
▯ 17mm wrench for adjusting the appliance feet.
▯ Bubble level for leveling the appliance.
Waste disposal
Disposal of Packaging Materials
After unpacking your new appliance dispose of the
protective packaging materials in an environmentally
friendly way. Ask your dealer or inquire with your local
authority regarding currently acceptable means of
disposal.
9WARNING
WARNINGS FOR CHILDREN
Do not let children play with packaging and
associated parts to avoid risk of choking or
suffocation.
Disposal of Your Old Appliance
Your old appliance can be recycled if it is no longer to be
used. Prior to disposing of your old appliance observe
the following precautions to reduce safety risks.
9WARNING
TO AVOID RISK OF INJURY OR DEATH, DO THE
FOLLOWING
- after unplugging the old appliance, remove the
electric power cord and dispose of properly.
- remove the door or permanently disable the door
lock to prevent children from being locked inside.
These installation instructions are intended for use by
qualified installers. In addition to these instructions, the
installation must comply with:
- for the United States - National Electrical Code, ANSI/
NFPA70 - and latest editions of the State and municipal
and/or local regulations.
- for Canada - Canadian Electrical Code C22.1 - and the
latest editions of the Provincial, Municipal and/or local
regulations.
12
Parts provided with your washer
Back side of the washing machine
Washer drum contents
Two AquaShield ® water supply hoses are shipped in
the washer drum. Be sure to remove each of these and
use these new hoses for the installation.
#
+
Power cord with plug
(
Literature pack; contents:
0
▯ User manual
▯ Covers
Drain hose
8
Elbow to form the hose to fit the drain pipe
@
3
Hot water AquaShield ® hose
H
Cold water AquaShield ® hose
P
NOTICE: If any parts are missing please notify your
dealer immediately.
Set up on a pedestal with drawer
Pedestal item number: WMZ 20490
Mount washer on the pedestal according to the
instructions in the installation kit.
13
Installation checklist
Review the following list and check off each step as it is
completed during installation.
Remove the transport bolts
9CAUTION
è
Installation StepPage
If installing to a pedestal (base), com-
14
plete the base installation before
removing the transport bolts
Completely remove all four shipping
14
bolts keeping the bolt and bushing
assemblies intact
Connect the water supply hose and
15
drain hose
Connect the electrical power18
Slide the washing machine into its final
location
Level the washing machine (as low as
17
possible)
Before washing laundry, run the Drum
23
Clean program
Importance of installing on a solid, level
floor
Your new Bosch washing machine utilizes high spin
speeds to achieve superior water removal from your
laundry resulting in reduced drying time. It is important to
install your washing machine on a floor that will provide
firm support. This prevents the washer from experiencing
excess vibration during spinning that could cause the
washer to move or be noisy.
The installation surface must be solid and level in both
directions. Avoid installing your washer on soft surfaces
such as floors with carpet or foam backed covering
material.
If installing the washer on a wooden floor, observe the
following:
▯ install the washer in a corner for better support if
possible.
▯ if necessary, reinforce the floor by screwing a water
resistant wooden board to the floor (minimum of
1.18 in./30 mm thick).
DAMAGE TO THE APPLIANCE OR INJURY
POSSIBLE
▯ The machine is secured for transport with
transport bolts.
Transport bolts that are not removed can damage
the drum during operation of the machine, the
washer will vibrate, and it will be much noisier
during spin cycles if the transport bolts are not
removed before use.
Be sure to remove all 4 transport bolts
completely before first use. Keep the transport
bolts.
If a pedestal was purchased with the washer, it
must be installed first, prior to removing the
transport bolts. Please consult the pedestal
installation instructions.
▯ In order to prevent transport damage during later
transport, be sure to re-install the bolts before
transport.
1.
Remove drain hose from all brackets.
2.
Loosen and remove all 4 transport bolts.
Remove the sleeves. Take the power cable out of the
brackets.
14
3.
Place covers over the transport bolt holes.
Four plastic covers are provided in the small parts bag
included with your washer. Separate these covers and
install one in each hole where the transport bolts were
removed.
Lock covers firmly by pressing on the snap hook.
NOTICE: Keep the assemblies together and store them
for later use such as when moving the washer.
▯ The water supply pressure must be between 14.5 to
145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons
(8 liters) of flow per minute. A pressure regulator valve
must be installed if the maximum water pressure is
exceeded.
▯ Make sure the water supply faucet is easily accessible
when the washer is in use. The faucet should be
turned off if the washer is going to be unused for
extended periods of time.
▯ Make sure rubber washers are in place at both ends of
the water supply hose. Missing washers could cause
leaks.
▯ The connection points are under full water pressure.
Turn on the water tap and check for leaks.
▯ Periodically inspect the water supply hose and replace
with a new hose if cuts, kinks or leaks are observed.
Water connections
Water supply hose connections
NOTICES
▯ The washing machine must only be operated with cold
and hot (max. 140 °F/60 °C) tap water. Do not
connect the appliance to the mixer tap of a
pressurized hot-water boiler.
▯ To prevent water damage, the hot and cold water
valves should be accessible when the washing
machine is in place and should always be turned off
when the washing machine is not in use.
▯ If installing the washing machine in a new building or a
building in which the plumbing system was recently
installed or upgraded, flush the lines before installing
the washing machine to remove any sand, dirt or
residue.
▯ To prevent leakage or water damage, follow the
instructions in this chapter.
▯ If in doubt, have the appliance installed by an
authorized technician.
Connect your washer to the wall faucets using the
included AquaShield® water supply hose.
Observe each of the following:
▯ Only use the new water supply hose shipped with your
washer. Never use old used hoses.
▯ The water supply hoses must not be kinked, bent, or
pinched causing hose damage or restricting water
flow.
Water connection hoses
▯ red - Hot water-hose
▯ blue - Cold water-hose
PD[
PD[
Attach this end to water tap. Hand tighten only.
Attach this end of the hose to the back of the washing
machine as shown in the following pictures. Be sure to
use clamps and route hoses as instructed. Hand
tighten only.
15
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.