Video | DINION AN 4000 KIT
DINION AN 4000 KIT
www.boschsecurity.com
u Stylish and sturdy housing (IP66; NEMA 4x)
u Optimized image visibility in high-contrast areas
u Ultra-high resolution 960H sensor
These pre-packaged camera kits are complete
surveillance systems that are quick and easy to install
thanks to their plug-and-play design. Each kit includes
a housing with a factory-installed high-performance
DINION camera and varifocal lens, plus a swivel
mount.
DINION 4000 cameras are compact analog cameras
that offer excellent resolution in variable lighting
conditions, day or night. The high performance 960H
1/3‑inch CCD sensor provides a resolution of 720TVL.
The cameras are an ideal solution for demanding
scene conditions. The backlight compensation and
highlight compensation features optimize the image
visibility in high-contrast areas, automatically
compensating for bright backgrounds and strong light
sources.
The camera parameters can be set individually. Privacy
zones and motion detection functions can be set up in
the handy camera menu system.
The true day/night version automatically switches from
color to monochrome using a mechanical IR filter
depending on the available light.
System overview
The kit is supplied ready to operate – simply connect
video and supply power. For especially challenging
situations where fine tuning or special settings are
required, the camera parameters can be individually
set using the control buttons on the side of the
camera and an On-Screen Display (OSD).
Functions
Secure and easily-installed
The sleek and sturdy housing design meets IP66 and
NEMA 4X enclosure standards to protect your video
surveillance equipment from adverse elements. A builtin heater and fan keep the internal temperature of the
housing within the specified operating temperatures. A
permanent low-power window defroster keeps the
housing window clear in high humidity and icy
condition. A sunshield is fitted to the top of the
housing. Tamper-resistant screws for the locking
clasps prevent illegitimate access to the housing
contents.
2 | DINION AN 4000 KIT
Power and video cabling can be routed through
external 4-pin power and BNC connectors at the rear
of the housing, or through seal-tight cable glands in
the foot or rear. The supplied mounting bracket has a
swivel and tilt head for maximum mounting flexibility.
The unique, hinged, side-opening design in the housing
provides easy access to the camera/lens controls
when the kit is mounted. The lens levers make it easy
to accurately adjust the camera focal length and focus.
The on-board camera push buttons allow the user to
choose the camera setup that suits best.
Pre-wired
For easy connection, some kit models have the
following 1.5 m (5 ft) cables pre-wired through sealtight cable glands in the housing foot:
• a coaxial cable (terminated with a female BNC
connector) from the back of the camera
• a power cable (18 AWG, 3-conductor with flying
leads) from the housing PCB
Day/Night mode
The true day/night version provides enhanced night
viewing. The mechanical IR filter can switch from color
to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can
be switched manually via the alarm input or through
the camera
Ideal picture performance
There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:
• BLC – automatically and dynamically compensates for
strong backlight
• HLC – reduces glare from highlight areas
• Digital dynamic range – extends dynamic range of
visible areas
• Contrast and sharpness – enhance details in bright or
misty scenes
• Dynamic noise reduction – dynamically reduces noise
in the picture
Privacy masking
Eight different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.
Video Motion Detection
The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal (the true day/night version can close
the output relay).
Typical applications:
• Museums and art galleries
• Shopping centers
• Offices
• Schools, colleges and universities
• Petrol/gas stations
Lens options
Two 960H IR-corrected lens versions are available for
the housing kits:
• One with a 2.8-12 mm varifocal lens
• One with a 5-50 mm varifocal lens
Certifications and approvals
Standards
Safety
(low voltage
versions)
Safety
(high voltage
versions)
Emission EN 55022 class B, FCC part 15 class B,
Immunity EN 50130-4, EN 50121-4
Vibration Camera with 500 g (1.1 lbs) lens according to
Region Certification
Europe CE
USA UL
Canada CSA
EN 60950-1
UL 60950-1 (2nd edition)
CSA C22.2 No. 60950-1-07 (2nd edition)
EN 60950-1
EN61000-3-2, EN61000-3-3
IEC 60068-2-6
CE High Voltage
FCC