Bosch VG5-7220-CPT5 Specsheet
Video | AUTODOME IP 7000 HD
AUTODOME IP 7000 HD
www.boschsecurity.com
u High-resolution, full HD PTZ camera with
1080p25/30 (2MP) resolution and 20x zoom
u Intelligent Tracking and alarm rules engine with on-
board Intelligent Video Analytics (IVA)
The AUTODOME 7000 HD is an easy to install, highspeed PTZ dome camera, in a field-proven indoor/
outdoor pendant housing or indoor in-ceiling housing,
that delivers unmatched picture quality and network
performance day and night with superb high-definition
(HD) 1080p25/30 (2MP) video and 20x optical zoom.
The camera provides complete network-based control
of all dome functionality including pan/tilt/zoom
operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also
provides direct network video streaming using H.264
compression / bandwidth throttling to efficiently
manage bandwidth and storage requirements while
delivering outstanding image quality.
Functions
High-performance PTZ day/night camera
The camera has a large, effective sensor area that
contributes to very high camera sensitivity. The
camera can be configured to operate in 720p50/60
mode for capturing fast motion (for example, in traffic
u Enhanced system flexibility with dual recording
options (iSCSI, SD card) and dual power source
options (High Power over Ethernet (High PoE) / 24
VAC)
u Fully configurable quad streaming with individually
configurable HD streams, based on Bosch’s
Common Product Platform (CPP4)
u Easy and intuitive installation with multiple pre-
configured user modes that allow users to select the
camera configuration that is ideal for their
applications
or gaming scenarios). The default 1080p25/30 mode
delivers high resolution images with six times more
details than a standard definition (SD) camera.
Intelligent Defog
Users can configure the mode to activate automatically
when the global contrast enhancement method in the
camera detects fog and adds light to the video image
(and then deactivates when the fog clears or the scene
changes).
Sodium vapor lamp white balance
The camera is an exceptional performer when
capturing video under a sodium vapor lamp (a street
lamp or tunnel lamp, for example). Uncorrected
images under these conditions have a yellowish tint,
which can make identification difficult. In the Sodium
Vapor White Balance mode, the camera automatically
compensates for the light from a sodium vapor lamp to
restore objects to their original color.
| AUTODOME IP 7000 HD
2
Virtual masking
The camera offers Virtual Masking, which gives users
flexibility to mask parts of the scene which should not
be considered for flow analysis to trigger Intelligent
Tracking. This allows users to mask from IVA/Tracking
any background motion (moving trees, pulsating lights,
and busy roads) in the scene without blocking the
motion from the video.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video
Analytics (IVA) to follow an individual or an object
continuously. Objects detected by IVA when the
camera is in a stationary position activate the
Intelligent Tracking feature, which controls the pan/
tilt/zoom actions of the camera to keep the tracked
object in the scene.
The new Intelligent Tracking is based on robust flow
detection algorithms which can reliably track moving
objects even under challenging scenes.
The tracking and detection reliability can be enhanced
further with virtual masking for scenes with a lot of
background motion such as trees or other objects
creating constant motion in the scene.
The camera supports three modes for Intelligent
Tracking:
Auto mode: When configured in this mode, the camera
actively analyzes the video to detect any moving
object. If it detects movement, it begins to track the
object. This mode is most useful for scenarios where
normally no motion is expected.
One Click mode: In this mode, users can click an
object moving in the live video image to enable the
camera to track the movement of the selected object.
This mode is most useful for scenarios where normal
scene activity is expected.
IVA-triggered mode: In this mode, the camera
continuously analyzes the scene for IVA alarms or IVA
rule violations. If an IVA rule is violated, it triggers the
advanced tracking feature of the camera to start
following the object / person that triggered the alarm.
This unique combination of robust IVA and Intelligent
Tracking allows the camera to track moving objects of
interest without getting distracted by other moving
objects in the scene.
Intelligence
With built-in video content analysis, the AUTODOME
reinforces the Intelligence-at-the-Edge concept where
edge devices become increasingly intelligent.
The AUTODOME comes with Bosch’s Intelligent Video
Analysis (IVA) built-in. IVA is state-of-the-art intelligent
video analysis that reliably detects, and analyzes
moving objects while suppressing unwanted alarms
from spurious sources in the image.
The IVA functionality built into the AUTODOME is able
to detect idle and removed objects as well as loitering,
multiple line crossing, and trajectories. IVA also
supports BEV (Bird’s Eye View) People counting.
Assisted Self Calibration and configurable detection
filters improve reliability and reduce operator work
load.
PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and
two styles of Guard Tours: Preset and Record/
Playback. Users can configure the preset standard tour
with as many as 256 sequential pre-positions, with a
configurable dwell time between pre-positions. The
AUTODOME Series also provides support for two
recorded tours, which are recorded macros of an
operator’s movements, including pan, tilt, and zoom
activities, and can be played back with the click of a
button.
Pan and tilt preset repeatability are accurate to within
±0.1 degrees to ensure that the correct scene is
captured every time. The camera delivers variable pan/
tilt speeds from a crawl speed of only 0.1 degrees per
second to a full 400 degrees per second. The camera
is capable of pan speeds of 400 degrees per second
and tilt speeds of 300 degrees per second between
prepositions. The camera provides a tilt angle 18
degrees above the horizon, and a pan range of up to
360 degrees continuous rotation.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes,
optimized with the best settings for a variety of typical
applications, make camera programming on-site easy
and user-friendly. Users select from the menu the
mode that best defines the environment in which the
camera is installed:
• Outdoor – general day-to-night changes with sun
highlights and street lighting
• Indoor – general day-to-night changes without sun
highlights and street lighting
• Low light –optimized for sufficient details at low light
• Motion – monitoring traffic or fast moving objects;
motion artifacts are minimized
• Vibrant – enhanced contrast color reproduction and
sharpness
Users have the ability to customize these modes, if
necessary, for the specific requirements of the site.
Superior privacy masking
The camera provides 24 individual, easy to configure
privacy masks, with up to 8 displayed in the same
scene. As the camera is zoomed, each mask changes
size smoothly and quickly, ensuring that the covered
object cannot be seen in most cases.
Comprehensive streaming capabilities on Bosch’s
Common Product Platform (CPP4)
The camera has an advanced, efficient H.264 encoder
(CPP4) embedded for high quality HD streaming video
and very efficient streaming and network capabilities.
The new platform supports simultaneous streaming of
individually configurable HD streams, and allows a
choice of HD resolution in combination of SD
resolutions.
| AUTODOME IP 7000 HD
3
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure
Digital High Capacity), or SDXC (Secure Digital
eXtended Capacity)) can be used for local alarm
recording or for scheduled local recording to improve
the overall recording reliability. Recording
management can be controlled by the Bosch Video
Recording Manager (VRM), or the camera can use
iSCSI targets directly without any recording software.
Dual power options
All models can be powered by a High Power-overEthernet (Bosch High PoE)-compliant network using a
Bosch High PoE Midspan (sold separately) over a
single network cable and/or a 24VAC power supply.
Certain models can also be powered by any PoE+
Power Sourcing Equipment (PSE; midspan or switch)
that is compliant to the IEEE 802.3at, class 4 standard
and/or a 24 VAC power supply.
When powered using High PoE or PoE+ (IEEE 802.3at
class 4) configuration, only a single cable connection
is required to power and to control the camera while
also viewing images from the camera. For additional
system reliability, users also have the option to
connect the 24 VAC power supply to the camera while
using High PoE.
Video management system support
The camera ships with Bosch Video Client (BVC), an
easy-to-use software from Bosch that is suitable for
midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video
Management System (BVMS), which allows enhanced
video management and viewing capabilities.
In addition, the camera is supported/integrated into all
of the leading third party video management systems.
ONVIF conformant
The AUTODOME Series conforms to the ONVIF Profile
S specification allowing easy integration with the
conformant devices and VMS.
For more information about ONVIF, visit
www.onvif.org.
The camera conforms to the ONVIF (Open Network
Video Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. ONVIF conformant devices
are able to exchange live video, audio, metadata and
control information. They are automatically discovered
and connected to network applications such as video
management systems.
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique
media converter module for use with various Bosch
devices. This media converter module is designed to
accept a wide-range of 10/100 Mbps SFP modules for
use with Multimode or Single-mode optical fiber with
LC or SC connectors.
The media converter module along with the SFP
module is user-installed directly into the camera‘s
power supply box to provide an integrated fiber optic
solution.
Access Security
Password protection with three levels and 802.1x
authentication is supported. To secure Web browser
access, use HTTPS with a SSL certificate stored in the
camera.
Easy upgrade
Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.
Ease of installation and servicing
The camera has been designed for quick and easy
installation; a key feature from Bosch CCTV products.
All housings feature recessed screws and latches for
increased tamper resistance.
Indoor/outdoor pendant housings are rated to provide
IP66 protection and offer an operating temperature
range down to -40 °C (-40 °F). The indoor/outdoor
pendant comes fully assembled with a sunshield and
ready for wall or pipe applications with the proper
mounting hardware (sold separately). In addition, the
camera models with both pendant and in-ceiling
housing come equipped with a low-impact, highresolution acrylic bubble for enhanced image clarity.
You can easily convert the outdoor pendant for indoor
applications by removing the sunshield.
Bosch offers a full complement of hardware and
accessories (sold separately) for wall, corner, mast,
roof, pipe mount, and in-ceiling applications for indoor
and outdoor environments, which allow the camera to
be adapted easily to individual site requirements.
Advanced networking capabilities
The AUTODOME offers advanced capabilities so you
can configure the camera to take advantage of the
latest networking technology.
The AUTODOME offers Quality of Service (QoS)
configuration options to ensure fast network response
to PTZ data and images. Quality of Service (QoS) is
the set of techniques to manage network resources.
QoS manages the delay, delay variation (jitter),
bandwidth, and packet loss parameters to guarantee
the ability of a network to deliver predictable results.
QoS identifies the type of data in a data packet and
divides the packets into traffic classes that can be
prioritized for forwarding.
The AUTODOME also supports the IPv6 internet-layer
protocol for packet-switched internetworking across
multiple IP networks. IPv6 uses 128-bit addresses
(IPv4 uses 32-bit addressing), which allows for many
more devices and users on the internet as well as
extra flexibility in allocating addresses and efficiency
for routing traffic.
206.89
[8.145]
175.99
[6.929]
21.29
[0.838]
99.76
[3.928]
IP
78.04
[3.072]
IP
204.49
[8.051]
ø
74.65
[2.939]
HD
95.88
[3.775]
HD
mm
[in.]
ø
mm
[in.]
134.6
[5.30]
366.9
[14.44]
11.0
[0.43]
160.0
[6.30]
186.1
[7.33]
169.9
[6.69]
188.0
[7.40]
158.0
[6.22]
R 76.6
[3.01]
189.0
[7.44]
224.0
[8.82]
549.6
[21.64]
532.1
[20.95]
469.1
[18.47]
201.2
[7.92]
216.4
[8.52]
233.0
[9.17]
22.86
[0.90]
86.7
[3.42]
299.4
[11.79]
R 76.6
[3.01]
189.0
[7.44]
224.0
[8.82]
4 | AUTODOME IP 7000 HD
Certifications and approvals
HD standards
• Complies with the SMPTE 274M-2008 Standard in:
– Resolution: 1920x1080
– Scan: Progressive
– Color representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25 and 30 frames/s
• Complies with the 296M-2001 Standard in:
– Resolution: 1280x720
– Scan: Progressive
– Color representation: complies with ITU-R BT.709
– Aspect ratio: 16:9
– Frame rate: 25, 30, 50 and 60 frames/s
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and
CE regulations, including latest versions of
EN 50130-4,
EN 55022:2006 inc. AL:2007,
EN 61000-3-3,
EN 61000-6-1,
EN 61000-6-2, and
EN 50121-4 (Railway applications)
Product Safety Complies with UL, CE, CSA, EN, and IEC
Standards 60950-1 & 22
Installation/configuration notes
AUTODOME 7000 Dimensions – In-ceiling
Environmental In-ceiling: IP54, Plenum rated (with acrylic
bubble)
IK10 rating when using optional bubble VGABUBBLE-IK10 (sold separately)
Indoor/Outdoor Pendant: IP66, NEMA 4X
ONVIF Conformance EN 50132-5-2
Notice
Conformity to EN 50130-4
One of the following power supply units is
required to conform to the EN 50130-4 standard:
VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2, VG4-APA0, VG4-A-PA1, or VG4-A-PA2.
AUTODOME 7000 Dimensions – Pendant, Pipe
1 Power supply box and
4 Power supply box
sunshield
2 Sunshield removed 5 Trim skirt
3 Mounting plate
Loading...