Bosch VG5-7028-E2PC4, VG5-7028-C1PC4, VG5-7036-E1PC4, VG5-7036-E2PC4, VG5-7028-C2PT4 Quick Manual
...
Video | AUTODOME 7000 IP
AUTODOME 7000 IP
www.boschsecurity.com
u Day/night IP camera with 28x or 36x optical zoom
(12x digital zoom), Wide Dynamic Range (WDR), and
Sodium Vapor White Balance mode that restores
objects to their original color
u New Intelligent Tracking and alarm rules engine with
on-board Intelligent Video Analytics (IVA)
u Enhanced system flexibility with dual recording
options (iSCSI, SD card)
u Fully configurable quad streaming with individually
configurable SD streams, based on Bosch’s new
Common Product Platform (CPP4)
u Easy and intuitive installation with multiple pre-
configured user modes that allow users to select the
camera configuration that is ideal for their
applications
The AUTODOME 7000 IP is an easy to install, highspeed PTZ dome camera, in a field-proven housing
suitable for indoor or outdoor installation, that
delivers unmatched picture quality and network
performance day and night.
The camera provides complete network-based control
of all dome functionality including pan/tilt/zoom
operation, presets, tours and alarms as well as webbased configuration of all dome settings. It also
provides direct network video streaming using H.264
compression / bandwidth throttling to efficiently
manage bandwidth and storage requirements while
delivering outstanding image quality.
Functions
High-performance PTZ day/night camera
The camera has a 1/4-in. CCD sensor, with 4CIF/D1
resolution and sensitivity to below 1.0 lux, and is
available with a choice of 28x and the industry-leading
36x optical zoom lens. Both camera options have a full
12x digital zoom and provide D1 horizontal resolution
for outstanding clarity and image detail. The camera
also incorporates Wide Dynamic Range (WDR)
technology that allows for the capture of clear images
from both bright and dark areas in the same frame.
WDR ensures that bright areas are not saturated and
that dark areas are not too dark.
Day/night capabilities and outstanding sensitivity make
the camera an exceptional performer in all lighting
conditions. In low light, the camera switches
automatically from color to monochrome by removing
the IR filter to boost the infrared illumination
sensitivity, while maintaining superior image quality.
For operation in the darkest conditions, the SensUp
control feature automatically reduces the shutter
speed to as little as one second. This increases
sensitivity by more than 50 times.
Progressive scan
The camera is ideally suited for IP imaging
applications. The progressive scan technology in the
camera provides smooth and clear images when
viewing images from the camera.
Sodium vapor lamp white balance
The camera is an exceptional performer when
capturing video under a sodium vapor lamp (a street
lamp or tunnel lamp, for example). Images under these
conditions may have a yellowish tint, which may make
identification difficult. In the Sodium Vapor White
Balance mode, the camera automatically compensates
for the light from a sodium vapor lamp to restore
objects to their original color.
Virtual masking
The camera offers Virtual Masking, which gives users
flexibility to mask parts of the scene which should not
be considered for flow analysis to trigger Intelligent
Tracking. This allows users to mask background
motion in the scene such as moving trees, pulsating
lights, busy roads, etc.
Intelligent Tracking
The camera utilizes the built-in Intelligent Video
Analytics (IVA) to follow an individual or an object
continuously. Objects detected by IVA when the
camera is in a stationary position activate the
Intelligent Tracking feature, which controls the pan/
tilt/zoom actions of the camera to keep the tracked
object in the scene.
The new Intelligent Tracking is based on robust flow
detection algorithms which can reliably track moving
objects even under challenging scenes.
The tracking and detection reliability can be enhanced
further with virtual masking for scenes with a lot of
background motion such as trees or other objects
creating constant motion in the scene.
The camera supports three modes for Intelligent
Tracking:
Auto mode: When configured in this mode, the camera
actively analyzes the video to detect any moving
object. If it detects movement, it begins to track the
object. This mode is most useful for scenarios where
normally no motion is expected.
One Click mode: In this mode, users can click an
object moving in the live video image to enable the
camera to track the movement of the selected object.
This mode is most useful for scenarios where normal
scene activity is expected.
IVA-triggered mode: In this mode, the camera
continuously analyzes the scene for IVA alarms or IVA
rule violations. If an IVA rule is violated, it triggers the
advanced tracking feature of the camera to start
following the object / person that triggered the alarm.
This unique combination of robust IVA and Intelligent
Tracking allows the camera to track moving objects of
interest without getting distracted by other moving
objects in the scene.
Intelligence
With built-in video content analysis, the AUTODOME
reinforces the Intelligence-at-the-Edge concept where
edge devices become increasingly intelligent.
The AUTODOME comes with Bosch’s Intelligent Video
Analysis (IVA) built-in. IVA is state-of-the-art intelligent
video analysis that reliably detects, and analyzes
moving objects while suppressing unwanted alarms
from spurious sources in the image.
The IVA functionality built into the AUTODOME is able
to detect idle and removed objects as well as loitering,
multiple line crossing, and trajectories. IVA also
supports BEV (Bird’s Eye View) People counting.
Assisted Self Calibration and configurable detection
filters improve reliability and reduce operator work
load.
AUTODOME 7000 PTZ drive and mechanism
The AUTODOME 7000 supports 256 pre-positions and
two styles of Guard Tours: Preset and Record/
Playback. Users can configure the preset standard tour
with as many as 256 sequential pre-positions, with a
configurable dwell time between pre-positions. The
AUTODOME Series also provides support for two
recorded tours, which are recorded macros of an
operator’s movements, including pan, tilt, and zoom
activities, and can be played back with the click of a
button.
Pan and tilt preset repeatability are accurate to within
±0.1 degrees to ensure that the correct scene is
captured every time. The camera delivers variable pan/
tilt speeds from a crawl speed of only 0.1 degrees per
second to a full 400 degrees per second. The camera
is capable of pan speeds of 400 degrees per second
and tilt speeds of 300 degrees per second between
prepositions. The camera provides a tilt angle 18
degrees above the horizon, and a pan range of up to
360 degrees continuous rotation.
The AutoScaling (proportional zoom) and AutoPivot
(automatically rotates and flips the camera) features
ensure optimal control.
Five (5) pre-programmed user modes
Five pre-programmed but configurable user modes,
optimized with the best settings for a variety of typical
applications, make camera programming on-site easy
and user-friendly. Users select from the menu the
mode that best defines the environment in which the
camera is installed:
• Outdoor – general day-to-night changes with sun
highlights and street lighting
• Indoor – general day-to-night changes without sun
highlights and street lighting
• Low light –optimized for sufficient details at low light
• Motion – monitoring traffic or fast moving objects;
motion artifacts are minimized
• Vibrant – enhanced contrast color reproduction and
sharpness
Users have the ability to customize these modes, if
necessary, for the specific requirements of the site.
2
| AUTODOME 7000 IP
Superior privacy masking
The camera provides 24 individual, easy to configure
privacy masks, with up to 8 displayed in the same
scene. As the camera is zoomed, each mask changes
size smoothly and quickly, ensuring that the covered
object cannot be seen in most cases.
Comprehensive streaming capabilities on Bosch’s
Common Product Platform (CPP4)
The camera has an advanced, efficient H.264 encoder
(CPP4) embedded for DVD-quality streaming video
and very efficient streaming and network capabilities.
The new platform supports simultaneous streaming of
individually configurable SD streams (H.264 and MJPEG), and allows a choice of SD resolution.
Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure
Digital High Capacity), or SDXC (Secure Digital
eXtended Capacity)) can be used for local alarm
recording or for scheduled local recording to improve
the overall recording reliability. Recording
management can be controlled by the Bosch Video
Recording Manager (VRM), or the camera can use
iSCSI targets directly without any recording software.
Advanced networking capabilities
The AUTODOME offers advanced capabilities so you
can configure the camera to take advantage of the
latest networking technology.
The AUTODOME offers Quality of Service (QoS)
configuration options to ensure fast network response
to PTZ data and images. Quality of Service (QoS) is
the set of techniques to manage network resources.
QoS manages the delay, delay variation (jitter),
bandwidth, and packet loss parameters to guarantee
the ability of a network to deliver predictable results.
QoS identifies the type of data in a data packet and
divides the packets into traffic classes that can be
prioritized for forwarding.
The AUTODOME also supports the IPv6 internet-layer
protocol for packet-switched internetworking across
multiple IP networks. IPv6 uses 128-bit addresses
(IPv4 uses 32-bit addressing), which allows for many
more devices and users on the internet as well as
extra flexibility in allocating addresses and efficiency
for routing traffic.
Ease of installation and servicing
The camera has been designed for quick and easy
installation; a key feature from Bosch CCTV products.
All housings feature recessed screws and latches for
increased tamper resistance.
AUTODOME in-ceiling housings provide IP54
protection. With an optional, impact-resistant, rugged
polycarbonate bubble (sold separately), they are rated
IK 8 (IEC 62262) to protect the camera from
vandalism. The rugged bubble can withstand impacts
equivalent to a 4.5 kg (10 lb) weight dropped from a
height of 3 m (10 ft).
Indoor/outdoor pendant housings are rated to provide
IP66 protection and offer an operating temperature
range down to -40 °C (-40 °F). The indoor/outdoor
pendant comes fully assembled with a sunshield and
ready for wall or pipe applications with the proper
mounting hardware (sold separately). In addition, the
camera models with pendant housing come equipped
with a low-impact, high-resolution acrylic bubble for
enhanced image clarity. You can easily convert the
outdoor pendant for indoor applications by removing
the sunshield.
Bosch offers a full complement of hardware and
accessories (sold separately) for wall, corner, mast,
roof, pipe mount, and in-ceiling applications, which
allow the camera to be adapted easily to individual
site requirements.
Video management system support
The camera ships with Bosch Video Client (BVC), an
easy-to-use software from Bosch that is suitable for
midsize installations. For large enterprise systems,
AUTODOME cameras can be used with Bosch Video
Management System (BVMS), which allows enhanced
video management and viewing capabilities.
In addition, the camera is supported/integrated into all
of the leading third party video management systems.
ONVIF conformant
The AUTODOME Series conforms to the ONVIF Profile
S specification allowing easy integration with the
conformant devices and VMS.
For more information about ONVIF, visit
www.onvif.org.
The camera conforms to the ONVIF (Open Network
Video Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. ONVIF conformant devices
are able to exchange live video, audio, metadata and
control information. They are automatically discovered
and connected to network applications such as video
management systems.
Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique
media converter module for use with AUTODOME
cameras. This media converter module is designed to
accept a wide-range of 10/100 Mbps SFP modules for
use with Multimode or Singlemode optical fiber with
LC or SC connectors.
The media converter module along with the SFP
module is user-installed directly into the camera‘s
power supply box to provide an integrated fiber optic
solution.
Unsurpassed reliability
As with all Bosch products, the AUTODOME Series has
been subjected to the industry’s most comprehensive
and demanding battery of endurance tests such as
HALT (highly accelerated life testing) to make sure it
will hold up through years of use. And of course, it
comes with Bosch’s industry-leading 3-year warranty.
3
| AUTODOME 7000 IP
Access security
Access security
Various security levels are available for accessing the
network, the camera, and the data channels. As well
as password protection with three levels, 802.1x
authentication using a RADIUS (Remote Authentication
Dial In User Service) server is supported. To secure
Web browser access, use HTTPS with a SSL certificate
stored in the camera. For total data protection, the
video and audio communication channels can be
independently AES encrypted with 128-bit keys by
installing the optional encryption site license.
Easy upgrade
Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products,
thus protecting investment with little effort.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations, including EN 50130-4, EN 55022
Class A, EN 61000-3-3, EN 61000-6-1, EN
61000-6-2, and EN 50121-4 (Railway
applications)
Product Safety Complies with CE regulations, UL, CSA, EN,
and IEC Standards
EN60950-1
Environmental In-ceiling: IP54, Plenum rated (with acrylic
bubble)
Also: IK8 rating when using optional
Polycarbonate bubble, sold separately
Indoor/Outdoor Pendant: IP66, NEMA 4X
ONVIF conformance EN 50132-5-2
Notice
Conformity to EN 50130-4
One of the following power supply units is
required to conform to the EN 50130-4 standard:
VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2, VG4-APA0, VG4-A-PA1, or VG4-A-PA2.
Parts included
In-ceiling
Quantity Item
1 AUTODOME 7000 In-Ceiling camera with acrylic bubble
and white trim ring
1 Interface box
1 Optional black trim ring
1 Ceiling gasket (for IP54 conformance)
Product DVD (which includes complete Operation Manual)
Packet of printed Safety literature
Outdoor Pendant
Quantity Item
1 AUTODOME 7000 Pendant camera with clear acrylic
bubble and sunshield
1 Product DVD (which includes complete Operation Manual)
1 Packet of printed Safety literature
Notes:
• The pendant can be converted to an indoor pendant
by removing the sunshield.
• Mounting hardware and accessories are available
separately.
Technical specifications
Camera 36x Day/Night
Imager 1/4 in.-type Exview HAD CCD (progressive
scan)
Effective Picture
Elements
PAL: Approx. 440,000; 752(H) x 582(V)
NTSC: Approx. 380,000; 768 (H) x 494 (V)
Lens 36x Zoom (3.4–122.4 mm) F1.6 to F4.5
Focus Automatic with manual override
Iris Automatic with manual override
Zoom Movement Speed NTSC PAL
• Optical WIDE / Optical TELE –
Focus Tracking ON
4.0 sec. 4.0 sec.
• Optical WIDE / Optical TELE –
Focus Tracking OFF
2.7 sec. 2.7 sec.
• Optical WIDE / Digital TELE 6.0 sec. 6.2 sec.
• Digital WIDE / Digital TELE 2.1 sec. 2.3 sec.
Optical Zoom Field of View
(FOV)
1.7° to 57.8°
Minimum Working Distance 320 mm (wide) to 1500 mm (tele)
Gain Control Auto/Manual/Max.
(–3 dB to 28 dB, 2 dB steps)
Synchronization Line-Lock (–120° to 120° vertical
phase adjust) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Sensitivity (typical)
1
30 IRE 50 IRE
Day Mode
SensUp Off
(NTSC: 1/60s
PAL: 1/50s)
0.66 lux
(0.061 fc)
1.4 lux
(0.13 fc)
SensUp On
(NTSC: 1/4s, 15X;
PAL 1/3s, 16.7X)
0.04 lux
(0.0037 fc)
0.1 lux
(0.0092 fc)
Night Mode
4 | AUTODOME 7000 IP
Loading...