AutoDome 600 Series Analog PTZ Camera
Datasheet
Product Photo
Ordering Information
Incorporates advanced, intelligent video features, equipped with AutoTrack II, built-in image stabilization, motion de‐
tection, and a sophisticated “rules” engine
AutoDome 600 Series Analog PTZ Camera
1
Introduction
The AutoDome 600 Series is an easy to install PTZ camera that delivers superb video in all indoor and outdoor appli‐
cations. The camera features day/night functionality for high quality images in low light conditions. This discrete,
high-speed dome camera ensures reliable, uncompromised functionality in diverse environments across various ap‐
plications.
AutoDome 600 Series highlights
The AutoDome delivers state-of-the-art technology and features that far exceed other PTZ cameras. The cameras
achieve a high horizontal resolution of 550 TV lines enabling the reproduction of clear and detailed images.
Wide Dynamic Range
The AutoDome features Wide Dynamic Range (WDR) technology that allows for the capture of clear images from
both bright and dark areas in the same frame. WDR ensures that bright areas are not saturated and that dark areas
are not too dark.
Progressive scan
The AutoDome camera is ideally suited for moving imaging applications. The progressive scan technology incorpora‐
ted into the camera provides smooth and clear images when viewing images from a moving camera.
Sodium vapor lamp white balance
The AutoDome is an exceptional performer when shooting under a sodium vapor lamp (a street lamp or tunnel lamp,
for example). Images under these conditions may have a yellowish tint, which may make identification difficult. In the
Sodium Vapor White Balance mode, the AutoDome automatically compensates for the light from a sodium vapor
lamp to restore objects to their original color.
Features
▪ Choice of 550 TVL 36x or 28x day/night cameras with 12x digital zoom and wide dynamic range
▪ Progressive scan provides smooth and clear images when viewing details in a moving image
▪ Sodium Vapor White Balance mode restores objects to their original color
▪ AutoTrack II automated motion tracking
▪ Advanced privacy masking
▪ Advanced alarm control with rules engine
▪ UTP transmission standard on all models
▪ Cable compensation extends cabling distances
AutoDome 600 Series Analog PTZ Camera
1
▪ High-impact, heavy-duty, tamper resistant aluminum housing
▪ High-speed 360-degree continuous pan
▪ Preset tour and AutoPan modes
System Overview
The AutoDome 600 Series offers variable pan and tilt speeds, and the AutoPivot feature ensures optimal camera
control and viewing at all zoom levels. These high-performance zoom autofocus cameras incorporate the latest digi‐
tal imaging technology with excellent sensitivity and resolution. With 99 user-defined presets as well as tour and Au‐
toPan modes, The AutoDome 600 Series is not small on features.
The AutoDome 600 Series adds real intelligence to your video surveillance applications. Equipped with AutoTrack II,
Bosch’s award-winning motion tracking software, built-in image stabilization, motion detection, and a sophisticated
alarm handling “rules” engine, the AutoDome 600 Series incorporates advanced, intelligent video features unmatch‐
ed by any other camera system.
The AutoDome 600 Series supports standard and optional video and data transmission methods, including Bilinx
(over coax and UTP) and fiber optic. Remote control, configuration, and firmware updates can also be performed
over these cables, offering you unparalleled control of your cameras. Cable compensation provides extended coaxial
and UTP distance runs while preventing the image quality degradation caused by signal losses from long cable
lengths.
Functions
The following are some of the features that make the AutoDome 600 Series the most flexible PTZ dome camera
systems in the security industry.
High-performance PTZ day/night cameras
Image control and quality are integral aspects of any PTZ dome camera, and the AutoDome delivers. The AutoDome
600 Series camera has a 1/4-in. CCD sensor, with 4CIF/D1 resolution and sensitivity to below 1.0 lux and is availa‐
ble with a choice of 28x and the industry-leading 36x optical zoom lens, and all 600 Series systems offer a full 12x
digital zoom.
Both camera options provide 550 TVL of horizontal resolution for outstanding clarity and image detail. The cameras
also incorporate technology that dramatically improves the dynamic range by 128 times. Also known as WDR (wide-
dynamic range), it results in clear image reproduction in extreme high-contrast environments.
The AutoScaling (proportional zoom) and AutoPivot (automatically rotates and flips the camera) features ensure opti‐
mal control.
AutoDome 600 Series Analog PTZ Camera
1
Day/night capabilities and outstanding sensitivity make AutoDome 600 Series cameras exceptional performers in all
lighting conditions. In low light, these cameras automatically switch from color to monochrome by removing the IR
filter to boost the infrared illumination sensitivity, while maintaining superior image quality. For operation in the dark‐
est conditions, the SensUp control feature automatically reduces the shutter speed to as little as one second. This
increases sensitivity by more than 50 times.
Accurate control and positioning
With super-quick, 360° per-second pan and 100° per-second tilt speeds; the AutoDome 600 Series outperforms oth‐
er domes in its class. The 600 Series supports 99 pre-positions and two styles of Guard Tours: Preset and Record/
Playback. The preset tour has capability for up to 99 pre-positions with a configurable dwell time between pre-posi‐
tions, and can be customized as to the order and frequency each preset is visited. The AutoDome 600 Series also
provides support for two recorded tours, which have a combined duration of 15 minutes of movements. These are
recorded macros of an operator’s movements, including pan, tilt, and zoom activities, and can be played back in a
continuous manner.
Supported menu languages include: English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian
and Spanish.
AutoTrack II
Bosch introduced the industry’s first automated motion tracking system, and now we’ve made this award-winning
technology even better. The AutoDome 600 Series contains an advanced DSP that provides real-time video pro‐
cessing for incredibly smooth object tracking.
AutoTrack II utilizes Bosch’s unique “virtual masking” technology. These “invisible” masks are created to act just like
privacy masks, except that only the AutoTrack can see them – and it knows to ignore any motion behind them. This
enables the AutoTrack to ignore extraneous background motion, such as a tree blowing in the wind, making it ideal
for both indoor and outdoor applications.
Video motion detection (VMD)
With AutoDome, you can create a “region of interest” within a preset position where motion is to be detected. The
AutoDome 600 Series supports a total of 10 individual regions of interest (one per pre-position). VMD also takes ad‐
vantage of virtual masking to ignore areas of unwanted motion.
Image stabilization
As PTZ cameras continue to improve their optical zoom capabilities, image stabilization becomes critical to eliminate
movement caused by unstable camera mounts. A mere quarter-inch of movement of the camera mount can shift the
field of view by more than 20 feet when the camera is zoomed to a high value. This can render images unusable.
AutoDome 600 Series Analog PTZ Camera
1
Image stabilization algorithms included with the AutoDome 600 Series reduces camera shake in both the vertical and
horizontal axis, resulting in exceptional image clarity (pixel displacement up to +/- 10% for frequencies up to 10 Hz).
Bosch’s unique image stabilization solution does not reduce camera sensitivity, unlike competitive systems.
Alarm management
The AutoDome 600 Series takes alarm handling to new levels of flexibility and power.
Inputs and outputs
The AutoDome 600 Series can handle seven alarm inputs, two of which are analog inputs that can be programmed
for EOLR (End-of-Line Resistor) supervision whenever true security applications require it. These inputs enable the
dome to “sense” if the contact is opened or closed and whether the wire has been tampered with (either by being cut
or shorted). In addition, the AutoDome 600 Series supports four outputs: one relay rated at two amps and three addi‐
tional open collectors for driving external devices. Each can be programmed individually.
Advanced alarm control
The AutoDome 600 advanced alarm control uses sophisticated rules-based logic to determine how to manage
alarms. In its most basic form, a “rule” could define which input(s) should activate which output(s). In a more complex
form, inputs and outputs can be combined with pre-defined or user-specified keyboard commands to perform ad‐
vanced dome functions. There is virtually no limit to the number of combinations that you can program, making the
standard software in the dome ready for any application.
Superior privacy masking
The AutoDome 600 Series allows for a total of 24 individual privacy masks, with up to eight displayed in the same
scene. Unlike conventional privacy masks, these can each be programmed with three, four, or even five corners to
cover more complex shapes. Each mask changes size and shape smoothly and quickly – ensuring that the covered
object cannot be seen. You also have a choice of colors: black, white, and blurred. Blurred comes in handy when
privacy is an issue, but determining the presence of motion is still required.
Fiber Optic Kit
The VGA-FIBER-AN (multimode) is an analog, fiber optic conversion kit for use with 100 and 600 Series Auto‐
Domes. This module is a video transmitter/data receiver modules designed to be mounted directly into an AutoDome
power supply box.
Ease of installation and servicing
The AutoDome 600 Series has been designed for quick and easy installation; a key feature from Bosch CCTV prod‐
ucts. All housings feature recessed screws and latches for increased tamper resistance.
AutoDome 600 Series Analog PTZ Camera
1
AutoDome in-ceiling housings provide IP54 protection (with an optional kit) and are rated IK 8 (IEC 62262). These
housings feature an impact-resistant polycarbonate rugged bubble to protect your camera from vandalism. The rug‐
ged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 m (10 ft).
AutoDome pendant housings (indoor and outdoor) are rated to provide IP 66 protection and come fully assembled
with a sunshield and ready for wall or pipe applications with the proper mounting hardware (purchased separately).
In addition, the pendant housing comes equipped with a low-impact, high-resolution acrylic bubble for enhanced im‐
age clarity.
Outdoor Pendant housings provide an operating temperature range down to -40°C (-40°F). The optional “XT” ex‐
treme temperature kit allows an AutoDome to operate in temperatures down to -60°C (-76°F), ensuring reliable oper‐
ation in even the harshest environments.
Note: Bosch offers a full complement of hardware and accessories (as a separate purchase) for corner, mast, roof,
pipe, and in-ceiling applications, which allow the AutoDome to be easily adapted to individual site requirements.
Easy upgrades
Bosch’s innovative software, the Configuration Tool for Imaging Devices (CTFID), allows operators or technicians to
control the PTZ, change camera settings, and even update firmware from virtually anywhere without need for addi‐
tional wiring.
The AutoDome 600 Series has advanced built-in diagnostics to simplify service and minimize downtime. Using the
On Screen Display (OSD), a technician can quickly and easily check critical parameters (such as internal tempera‐
ture and input voltage level) to verify that the dome is functioning within acceptable operating limits. If video is not
present, a local inspection of three diagnostic LEDs at the camera site can identify the presence of video and control
data.
Components
In-ceiling
1 Fully-assembled in-ceiling housing
1 Polycarbonate bubble, clear or tinted
1 Interface box
1 Coaxial cable with ferrite
Indoor Pendant
1 Fully-assembled indoor pendant housing
1 Acrylic bubble, clear
1 Coaxial cable with ferrite
Outdoor Pendant
1 Fully-assembled outdoor pendant housing with sunshield
1 Acrylic bubble, clear
1 Coaxial cable with ferrite
Note:
1. Mounting hardware and accessories are available separately.
AutoDome 600 Series Analog PTZ Camera
1
2. The coaxial cable with ferrite is required for pendant arm and in-ceiling mount applications. Do note use the co‐
axial cable with ferrite for pipe or roof mount applications.
Approvals
Electromagnetic Compatibility (EMC) Complies with FCC Part 15, ICES-003, and CE regulations, including
EN50130-4 and EN50121-4
Product Safety Complies with CE regulations, UL, CSA, EN, and IEC Standards
Environmental In-ceiling: IP54 (with optional VGA-IP54K-IC kit), Plenum rated
Pendant: IP66, NEMA 4X
Impact Resistance In-ceiling: IK 8
Planning
AutoDome 600 Series Analog PTZ Camera
Specifications
Camera 36x Day/Night
Imager 1/4 in.-type Exview HAD CCD
(progressive scan)
Effective Picture Elements PAL: Approx. 440,000; 752(H) x 582(V)
NTSC: Approx. 380,000; 768 (H) x 494 (V)
Lens 36x Zoom (3.4–122.4 mm)
F1.6 to F4.5
Zoom Movement Speed NTSC PAL
1
▪ Optical WIDE / Optical TELE – Focus Tracking
ON
▪ Optical WIDE / Optical TELE – Focus Tracking
OFF
▪ Optical WIDE / Digital TELE 6.0 sec. 6.2 sec.
▪ Digital WIDE / Digital TELE 2.1 sec. 2.3 sec.
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 1.7° to 57.8°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Auto/Manual/Max.
(–3 dB to 28 dB, 2 dB steps)
Aperture Correction Horizontal and vertical
Digital Zoom 12x
4.0 sec. 4.0 sec.
2.7 sec. 2.7 sec.
Horizontal Resolution 550 TVL (NTSC, PAL) typical
Synchronization Line-Lock (–120° to 120° vertical phase adjust) or internal
crystal
Sensitivity (typical)
Day Mode
1
30 IRE 50 IRE
AutoDome 600 Series Analog PTZ Camera
SensUp Off 0.66 lux 1.4 lux
1
SensUp On
0.04 lux 0.1 lux
(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X)
Night Mode
SensUp Off 0.104 lux 0.209 lux
SensUp On
0.0052 lux 0.0103 lux
(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X)
Electronic Shutter Speed 1/1 to 1/10,000 sec., 22 steps
Signal-to-Noise Ratio (SNR) >50 dB
White Balance 2000 K to 10,000 K
1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds
0.47 f-stop loss (60% light transmission).
Camera 28x Day/Night
Imager 1/4 in.-type Exview HAD CCD
(progressive scan)
Effective Picture Elements NTSC: 380,000
PAL: 440,000
Lens 28x Zoom (3.5–98.0 mm)
F1.35 to F3.7
Zoom Movement Speed NTSC PAL
▪ Optical WIDE / Optical TELE – Focus
2.5 sec. 2.5 sec
Tracking ON
▪ Optical WIDE / Optical TELE – Focus
1.7 sec. 1.7 sec.
Tracking OFF
▪ Optical WIDE / Digital TELE – Focus
4.5 sec. 4.9 sec.
Tracking ON
▪ Optical WIDE / Digital TELE – Focus
1.7 sec. 1.7 sec.
Tracking OFF
▪ Digital WIDE / Digital TELE 2.0 sec. 2.5 sec.
AutoDome 600 Series Analog PTZ Camera
1
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 2.1° to 55.8°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Auto/Manual/Max.
(–3 dB to 28 dB, 2 dB steps)
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution 550 TVL
Synchronization Line-Lock (–120° to 120° vertical phase adjust) or internal
crystal
Sensitivity (typical)
2
30 IRE 50 IRE
Day Mode
SensUp Off 0.33 lux 0.66 lux
SensUp On
0.02 lux 0.04 lux
(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X)
Night Mode
SensUp Off 0.066 lux 0.166 lux
SensUp On
0.0026 lux 0.0082 lux
(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X)
Electronic Shutter Speed 1/1 to 1/10,000 sec., 22 steps
Signal-to-Noise Ratio (SNR) >50 dB
White Balance 2000 K to 10,000 K
2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds
0.47 f-stop loss (60% light transmission).
Mechanical
In-Ceiling Indoor
Pendant
Pan Range 360° cont. 360° cont. 360° cont.
Outdoor
Pendant
AutoDome 600 Series Analog PTZ Camera
Tilt Angle 1° above horizon 18° above horizon 18° above horizon
Variable Speed 0.1°/s-120°/s 0.1°/s-120°/s 0.1°/s-120°/s
1
Pre-position Speed Pan: 360°/s
Tilt: 100°/s
Preset
Accuracy
± 0.1° typ. ± 0.1° typ. ± 0.1° typ.
Pan: 360°/s
Tilt: 100°/s
Electrical
In-Ceiling Indoor
Pendant
Input Voltage 21-30 VAC
50/60 Hz
Power Consumption,
typical
3. Add 16 W if using VG4-SHTR-XT kit.
15 W / 27 VA 15 W / 27 VA 51 W / 55 VA
21-30 VAC
50/60 Hz
Pan: 360°/s
Tilt: 100°/s
Outdoor
Pendant
21-30 VAC
50/60 Hz
3
Surge Suppression
Protection on
Video
Protection on
Biphase
Protection on
RS-232/485
Protection on
Alarm Inputs
Protection on
Alarm Outputs
Protection on
Relay Outputs
Peak current 10 kA (Gas Tube Arrester)
Peak current 10 A, peak power 300 W (8/20 μs)
ESD protection ±15 KV human body model
Peak current 17 A, peak power 300 W (8/20 μs)
Peak current 2 A, peak power 300 W (8/20 μs)
Peak current 7.3 A, peak power 600 W (10/1000 μs)
AutoDome 600 Series Analog PTZ Camera
1
Protection on Power Input
(Dome)
Protection on Power
Output (Arm Power Supply)
Peak current 7.3 A, peak power 600 W
(10/1000 μs)
Peak current 21.4 A, peak power 1500 W
(10/1000 μs)
Fiber Optic Kits
VGA-FIBER-AN
Description Multimode Fiber Optic Module
Compatible Receiver LTC 4629 Series
Optical Fiber
Compatibility
Max. Distance 4.0 km (2.5 miles)
Optical Budget 14 dB
Connector One (1) ST connector
50/125 µm, 62.5/125 µm, low loss multimode glass fiber, rated for a minimum
system bandwidth of 20 MHz
Wavelength
(video/data)
850 nm / 1310 nm
Miscellaneous
Sectors/Titling 16 independent sectors with 20-character titles/sector
Masking 24 individually configurable privacy masks
Pre-positions 99, each with 20-character titles
Camera Setup/Control Biphase, RS-232, RS-485, Bilinx (coax)
Communications Protocols Biphase, Bilinx, Pelco P, and Pelco D
Guard Tours Two (2) types of tours:
▪ Recorded tours – two (2), total duration 15 minutes
▪ Preset tour – one (1), consisting of up to 99 scenes, consecutively and (1) cus‐
tomized up to 99 scenes
Supported Languages English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian and
Spanish
AutoDome 600 Series Analog PTZ Camera
Cable Compensation
Max Distance With Pre-comp OFF With Pre-comp ON
RG-59/U 1000 ft (300 m) 2000 ft (600 m)
RG-6/U 1500 ft (450 m) 3000 ft (900 m)
RG-11/U 2000 ft (600 m) 4000 ft (1200 m)
1
Cat 5/UTP
(Passive receiver)
750 ft (225 m) 1500 ft (450 m)
User Connections
Power, Camera 21-30 VAC, 50/60 Hz
Power, Heater 21-30 VAC, 50/60 Hz
Control Data Biphase ±
RS-232 RX/TX or RS-485 ± - optional control data (dip switch selectable)
Video BNC/UTP
Audio Line In 9 K Ohm typ, 5.5 Vp-p max
EOLR Alarm Inputs (2) Programmable for
“normally open”, “normally closed”, “normally open-supervised”, “nor‐
mally closed-supervised”
Alarm Inputs (5) Programmable for
“normally open” or “normally closed”
Relay Out (1) Dry contact output rating:
2 A @ 30 VAC
Open Collector Outputs (3) 32 VDC@150 ma max.
Environmental
In-Ceiling Indoor Pendant Outdoor Pendant
Design
Rating
4
IP54,
Plenum rated
IP66,
NEMA 4X
IP66,
NEMA 4X
AutoDome 600 Series Analog PTZ Camera
1
Operating Temp. –10°C to 40°C
(14°F to 104°F)
Storage Temp. –40°C to 60°C
(–40°F to 140°F)
Humidity 0% to 90% relative, non-
condensing
4. With optional VGA-IP54K-IC kit.
–10°C to 40°C
(14°F to 104°F)
–40°C to 60°C
(–40°F to 140°F)
0% to 90% relative, non-
condensing
Construction
Dimensions See dimensional drawings
–40°C to 50°C
(–40°F to 122°F)
with XT kit:
–60°C to 50°C
(–76°F to 122°F)
–40°C to 60°C
(–40°F to 140°F)
0% to 100% relative, condensing
Weight
▪ In-ceiling 2.66 kg (5.86 lb)
▪ Indoor Pendant 2.88 kg (6.3 lb)
▪ Outdoor Pendant 3.32 kg (7.3 lb)
Bubble Size 153.1 mm diameter (6.03 in.)
Construction Material
▪ Housing Cast aluminum
▪ Bubble Pendant: Acrylic (high-resolution)
In-ceiling: Polycarbonate (rugged)
Color White (RAL 9003)
Standard Finish Powder coated, sand finish
Mounts/Accessories
Bubbles
In-ceiling
AutoDome 600 Series Analog PTZ Camera
Clear rugged polycarbonate VGA-BUBBLE-CCLR
Tinted rugged polycarbonate VGA-BUBBLE-CTIR
Pendant
Clear rugged polycarbonate VGA-BUBBLE-PCLR
Tinted rugged polycarbonate VGA-BUBBLE-PTIR
Clear high-resolution acrylic VGA-BUBBLE-PCLA
Tinted high-resolution acrylic VGA-BUBBLE-PTIA
Pendant Arm Mounts
Wall Arm (No Transformer) VG4-A-PA0
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 /
1
VG4-A-PA2
Pendant Arm with Wiring VGA-PEND-ARM
Mounting plate for VGA-PEND-ARM VGA-PEND-WPLATE
Trim skirt for AutoDome Series Power Supplies VG4-A-TSKIRT
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate VG4-A-9542
Mast (Pole) Mounting Plate VG4-A-9541
Pendant Pipe Mounts
Pipe Mount Cap VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
Optional Mounting Plates for Roof Mounts
VGA-ROOF-MOUNT
Flat Roof Adapter for Parapet Mount LTC 9230/01
In-ceiling Support Kits
Bracket for suspended or drop ceilings VGA-IC-SP
Gasket kit for IP54 certification VGA-IP54K-IC
AutoDome 600 Series Analog PTZ Camera
Power Supplies
Outdoor Power Supply Box, no transformer VG4-A-PSU0
Outdoor Power Supply Box (120/230 VAC Transformer) VG4-A-PSU1 /
VG4-A-PSU2
1
Extended temp heater module
extends temperature range
to – 60°C (–76°F) for outdoor pendants only
Fiber Optic Kit VGA-FIBER-AN
VG4-SHTR-XT
Dimensions: Indoor AutoDomes
1.90
0.75
201.8
7.94
204.3
8.04
77.0
3.03
R
94.1
3.70
176.0
6.93
86.7
3.42
22.6
0.90
299.4
11.79
76.6
3.01
R
188.9
7.44
88.9
3.50
88.9
3.50
10.2
0.40
201.2
7.92
216.4
8.52
469.1
18.47
R
374.8
14.75
188.0
7.40
76.6
3.01
11.0
0.43
160.0
6.30
184.0
7.25
134.6
5.30
1
3
4
6
2
5
mm
in.
216.4
8.52
460.1
18.12
1a
134.6
5.30
(4)
11.0
0.43
160.0
6.30
185.7
7.31
169.5
6.67
366.4
14.43
R
76.6
3.01
2a
3a
AutoDome 600 Series Analog PTZ Camera
1
Indoor System Dimensions
Reference Description
1 Wall Mount – Side with power supply
1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
2 Wall Mount – Front with power supply and trim skirt
2a Wall Mount – Front with power supply
3 Wall Mount – Back with power supply and trim skirt
3a Wall Mount – Back with power supply
4 Pipe Mount
3
6
2
76.6
3.01
R
374.8
14.75
188.0
7.40
134.6
5.30
(4)
11.0
0.43
160.0
6.30
184.0
7.25
175
6.9
193
7.6
5
236
9.3
203
8.0
133.4
5.25
133.4
5.25
219.1
8.63
178
7.0
38
1.5
mm
in.
152.4
6.0
1-1/2 NPT
69.9
2.75
101.6 Typ.
4.0
10.4
8 x 0.41
114.3
4.50 Typ.
228.6
9.0
279.4
11.0
1022.4
40.25
976.1
38.43
88.1
3.47
1190.8
46.88
616
24.25
346.2
13.63
549.6
21.64
235.8
9.28
224.0
8.82
58
2.3
1
22.9
0.90
86.7
3.42
299.4
11.79
224.0
8.82
4
7
8
Ø
11.0
04.3
216.4
8.52
170.0
6.69
134.6
5.30
160.0
6.30
50.8
2.00
105.0
4.13
9
Ø 10.4
0.41
16.0 Typ.
0.63
111 Typ.
4.37
6.35 Typ.
0.25
279.4
11.00
6.35
0.25
378
14.88
254
10.00
477.6
18.80
216.4
8.52
224.0
8.82
134.6
5.30
160.0
6.30
185.7
7.31
(4)
11.0
0.43
169.5
6.67
366.4
14.43
76.6
3.01
R
1a
2a
3a
5 In-ceiling Mount – Front
6 In-ceiling Mount – Side
Dimensions: Outdoor AutoDomes
AutoDome 600 Series Analog PTZ Camera
1
Outdoor System Dimensions
AutoDome 600 Series Analog PTZ Camera
Reference Description
1 Wall Mount – Side with power supply and trim skirt
1a Wall/Mast Mount – Side with VGA-PEND-WPLATE
2 Wall Mount – Front with power supply and trim skirt
2a Wall Mount – Front with power supply
3 Wall Mount – Back with power supply and trim skirt
3a Wall Mount – Back with power supply
4 Pipe Mount
5 Mast Mount
6 Corner Mount
7 Roof Mount
1
8 Roof Mount Adapter
9 Power Supply for Pipe and Roof Mounts
VG5-613-CCS AutoDome 600 Series 28x PAL In-ceiling Camera
Datasheet
Product Photo
Ordering Information
Analog 28x PAL camera, in-ceiling housing with a clear polycarbonate bubble
Introduction
Features