Bosch VG4-313-PTS, VG4-312-PTE2W, VG4-313-PCS, VG4-313-ETS, VG4-313-ECS User Manual
...
Video | AutoDome 300 Series PTZ Camera System
AutoDome 300 Series PTZ Camera System
www.boschsecurity.com
u High-speed PTZ dome
u Fully interchangeable CPUs, cameras, housings,
communications, and mounts
u Choice of 540 TVL 36x day/night night camera with
128x wide dynamic range or 26x and 18x day/night
cameras
u Optional hybrid operation provides simultaneous
analog (coax) and IP connectivity
u Advanced privacy masking
Bosch’s AutoDome modular camera system is a
revolutionary new concept in dome cameras. More
than just a series of cameras, it’s a dome platform
built around a system of intelligent, interchangeable
modules that allow you to update camera functionality
quickly and cost-effectively. Using common
components lets you install a basic camera system
today and migrate to a more advanced version
tomorrow – without having to replace the entire dome,
thus protecting your initial investment.
Interchangeable modules
The entire AutoDome system is based on five
interchangeable modules: the CPU, camera, housing,
communications, and power supply. Simply swap one
of AutoDome’s interchangeable modules and quickly
upgrade from analog to IP, color to day/night, or add
motion detection. Never before have you had the
ability to adapt a security system to your changing
needs this quickly or inexpensively.
By using the same housing components, all
installations have a consistent look, and observers
have no idea which type of camera (if any) is watching
over them. This unique, modular design also gives you
the flexibility to move cameras between different
housings when special coverage is needed, or as site
plan requirements change. For example, an 18x PTZ
camera over a specific area could easily be “hotswapped” to a 26x or 36x day/night without removing
the power.
Migrating from a basic dome to one with advanced
features such as AutoTrack II intelligent tracking can
be done quickly and easily, without requiring dome
removal or rewiring. AutoDome’s Ethernet
communications module allows you to add IP
functionality while maintaining connectivity to existing
analog inputs and outputs.
300 Series highlights
The AutoDome 300 Series includes support for 18x,
26x, and the industry-leading 36x day/night PTZ
cameras, and several advanced features – including an
alarm management “rules” engine and privacy
masking.
The AutoDome 300 Series supports a variety of
standard and optional video and data transmission
methods, including Bilinx (over coax and UTP), fiber,
and even TCP/IP over Ethernet. Remote control,
configuration, and firmware updates can also be
performed over these cables, offering you unparalleled
control of your cameras. Cable compensation provides
extended coaxial and UTP distance runs while
preventing the image quality degradation caused by
signal losses from long cable lengths.
The optional IP Communications Module has hybrid
functionality to protect your current analog technology
investment while providing a clear and stable
migration path to fully digital, IP-based solutions. This
allows you to move to IP video at your own pace – all
at once or one camera at a time. And since all
AutoDome modules are completely interchangeable,
there is no need to replace expensive components
(e.g., cameras) or labor-intensive components (e.g.,
mounts and housings).
Functions
The following are some of the features that make the
AutoDome 300 Series the most flexible PTZ dome
camera systems in the security industry.
High-performance PTZ day/night cameras
Image control and quality are integral aspects of any
PTZ dome system, and the AutoDome delivers. The
300 Series is available with a choice of 18x, 26x, or an
industry-leading 36x optical zoom lens, and all 300
Series systems offer a full 12x digital zoom. The 18x
and 26x cameras provide 470 TVL (NTSC) or 480 TVL
(PAL), and the 36x camera provides a full 540 TVL of
horizontal resolution for outstanding clarity and image
detail. The 36x camera also incorporates technology
that dramatically improves the dynamic range by 128
times. Also known as WDR (wide-dynamic range), it
results in clear image reproduction in extreme highcontrast environments.
The AutoScaling (proportional zoom) and AutoPivot
(automatically rotates and flips the camera) features
ensure optimal control.
Day/night capabilities and outstanding sensitivity make
300 Series cameras exceptional performers in all
lighting conditions. In low light, these cameras
automatically switch from color to monochrome by
removing the IR filter to boost infrared illumination
sensitivity, while maintaining superior image quality.
For operation in the darkest conditions, the SensUp
control feature automatically extends the shutter
speed to as much as one second. This increases
sensitivity by more than 50 times.
With super-quick, 360° per-second pan and tilt speeds,
the AutoDome 300 Series outperforms other domes in
its class. The 300 Series supports 99 pre-positions and
two styles of guard tours: preset and record/playback.
The preset tour can handle up to 99 pre-positions with
a configurable dwell time between pre-positions; the
order and frequency with which each preset is visited
can be customized. The AutoDome 300 Series also
provides support for two recorded tours, which have a
combined duration of 15 minutes of movement. These
are recorded macros of an operator’s movements,
including pan, tilt, and zoom activities, and can be
played back continuously.
Supported menu languages include: English, French,
German, Spanish, Portuguese, Italian, Dutch, and
Polish.
Alarm management
The AutoDome 300 Series takes alarm handling to new
levels of flexibility and power.
Inputs and outputs
The AutoDome 300 Series can handle seven alarm
inputs: two of these are analog inputs that can be
programmed for EOLR (End-of-Line Resistor)
supervision whenever true security applications
require it. These inputs enable the dome to “sense” if
the contact is opened or closed and whether the wire
has been tampered with (either by being cut or
shorted). In addition, the AutoDome 300 Series
supports four outputs: one relay rated at two amps
and three additional open collectors for driving
external devices. Each can be programmed
individually.
Advanced alarm control
This new concept in flexibility goes beyond simple
alarm handling. Advanced alarm control uses
sophisticated rules-based logic to determine how to
manage alarms. In its most basic form, a “rule” could
define which input(s) should activate which output(s).
In a more complex form, inputs and outputs can be
combined with pre-defined or user-specified keyboard
commands to perform advanced dome functions.
There is virtually no limit to the number of
combinations that you can program, making the
standard software in the dome ready for any
application.
Superior privacy masking
The AutoDome 300 Series allows for a total of 24
individual privacy masks, with up to eight displayed in
the same scene. Unlike conventional privacy masks,
these can each be programmed with three, four, or
even five corners to cover more complex shapes. As
the camera is zoomed each mask changes size
smoothly and quickly ensuring that the covered object
cannot be seen. You also have a choice of colors:
black, white, and blurred. Blurred comes in handy
when privacy is an issue, but determining the presence
of motion is still required.
Optional hybrid analog/IP operation
AutoDomes equipped with the optional TCP/IP
Communications Module use an advanced H.264
encoder to create DVD-quality streaming video across
a local or a wide area network, and can simultaneously
stream CVBS video via coaxial cabling to support
existing analog equipment. Network video streams are
2
| AutoDome 300 Series PTZ Camera System
sent over IP networks and can be viewed with the
Bosch Divar XF Digital Video Recorder, or on a PC
running VIDOS video management software.
Alternatively, a Bosch IP video decoder can be used to
display the video on an analog CVBS or VGA monitor.
For maximum accessibility, the video can be viewed
using a web browser.
Tri-streaming video
Bosch’s innovative tri-streaming feature enables
AutoDomes equipped with the optional IP
communications module to generate independent
streams simultaneously. This feature allows you to
stream high-quality images for live viewing while
recording at a reduced frame rate, and at the same
time, stream images to a remote PDA device.
Unsurpassed reliability
All housings feature recessed screws and latches for
increased tamper resistance.
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. In addition, the
pendant housings come equipped with a low-impact,
high-resolution acrylic bubble for enhanced image
clarity
AutoDome in-ceiling housings are rated IK 8
(IEC 62262). These housings feature an impactresistant polycarbonate Rugged Bubble to protect your
camera from vandalism. The Rugged Bubble can
withstand impacts equivalent to a 4.5 kg (10 lb)
weight dropped from a height of 3 m (10 ft).
Outdoor EnviroDome housings provide an operating
temperature range down to -40°C (-40°F). The optional
“XT” extreme temperature kit allows an AutoDome to
operate in temperatures down to -60°C (-76°F),
ensuring reliable operation in even the harshest
environments.
The Pressurized Environmental Housing is rated to
provide IP 67 protection for a VG4 Series AutoDome
®
Modular Camera System from the elements, both
natural and manmade. It is the ideal surveillance
solution for applications that require frequent washdown, including traffic, transit, bridges, tunnels and
coastal installations where salt, moisture, dust, insects
and fumes threaten the long-term operation of the
camera.
Ease of installation and servicing
Bosch’s innovative software, the Configuration Tool for
Imaging Devices (CTFID), allows operators or
technicians to control the PTZ, change camera
settings, and even update firmware from virtually
anywhere without need for additional wiring. For the
new Ethernet versions, an embedded Web server lets
the installer access all the user settings, make camera
adjustments, and update firmware via a standard Web
browser.
AutoDome’s innovative design simplifies installation
and servicing. AutoDome reduces maintenance costs
because you can replace individual modules instead of
entire camera assemblies. Simply pop out the old
module and slide in the new: it’s almost as easy as
changing a light bulb. All tethers have been replaced
with hinges, making installation and servicing safer
and easier. You can even access the built-in power
supply without taking down the dome.
The AutoDome 300 Series has advanced built-in
diagnostics to simplify service and minimize
downtime. Using the On Screen Display (OSD), a
technician can quickly and easily check critical
parameters (such as internal temperature and input
voltage level) to verify that the dome is functioning
within acceptable operating limits. If video is not
present, a local inspection of three diagnostic LEDs at
the camera site can identify the presence of video and
control data.
Feature Comparison Matrix
The following table provides an overview of the
AutoDome camera family and its available features:
Preset Shots 64 99 99
High Speed PTZ
Interchangeable Modules
Day/Night Operation
High Resolution Camera
Alarm Inputs 7/4 7/4
Guard Tour
SensUp Extended Sensitivity
IR Sensitive
Cable Compensation
Bilinx Remote Configuration*
Hybrid Analog/IP Connectivity
UTP/Coax Transmission
Ruggedized, Vandal-Resistant Enclosure
Hot-Swap Camera Modules
Image Stabilization
Video Motion Detection
AutoTrack II Motion Tracking
Advanced Features
Advanced Alarm Control
Privacy Masking and Sector Blanking
AutoDome
100 Series
AutoDome
200 Series
AutoDome
300 Series
AutoDome
500i Series
Standard Features
Preset Tour
*Compatible over Coax and UTP transmission only. Remote configuration over IP via web
interface.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations, including EN50130-4 and
EN50121-4
Product Safety Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Region Certification
Europe CE EMC Directive, Low-Voltage Directive
3 | AutoDome 300 Series PTZ Camera System
Installation/configuration notes
2
2
E
P
C
1
E
S
P
R
C
M
W
VG4
- -
3
C
T
0
1
F
2
3
1
2
3
6
7
8
4
5
4
1 Video Format 6 Power
5
1 PTZ PAL 0 24 VAC
1
2 PTZ NTSC 1 120 VAC
2 Camera Type 2 230 VAC
2 18x Day/Night PTZ 7 Mount
3 26x Day/Night PTZ W Wall
4 36x Day/Night PTZ M Mast
3 Enclosure C Corner
C In-ceiling
2
R Roof
4
P Indoor Pendant P Pipe
E Outdoor Pendant
4 Bubble 8 Fiber Optics
C Clear _ No Fiber
T Tinted F Fiber
3
5 Communications
S Standard Analog
(Coax/UTP)
E Ethernet (TCP/IP)
1 No transformer included. Customer must supply an approved 24 VAC limited power
supply (VG4-A-PSUx or equivalent).
2 Recessed in-ceiling housing units do not require kit options for reference numbers 6, 7,
or 8.
3 Fiber optic option is multi-mode with biphase. Requires LTC 4629 at the system.
4 Roof mount mounts to vertical Parapet. For flat roof installation, order an additional
LTC 9230/01 Flat Roof Adapter Plate.
5 Optional trim skirt available as a separate purchase.
Technical specifications
Camera 36x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 36x Zoom (3.4 –122.4 mm)
F1.6 to F4.5
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 1.7° to 57.8°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution 540 TVL (NTSC, PAL) typical
Sensitivity (typical)
6
30 IRE 50 IRE
Day Mode
SensUp Off 0.66 lx 1.4 lx
SensUp On (15x) 0.033 lx 0.083 lx
Night Mode
SensUp Off 0.166 lx 0.33 lx
SensUp On (15x) 0.0065 lx 0.0164 lx
Electronic Shutter Speed
(AES)
1 to 1/10,000
SNR >50 dB
White Balance 2000 K to 10,000 K
6 F1.6, 1/60 (1/50) shutter, max AGC.
Camera 26x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 26x Zoom (3.5–91.0 mm)
F1.6 to F3.8
Focus Automatic, with manual override
Iris Automatic, with manual override
Field of View 2.3° to 55°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase
adjust) or internal crystal
4 | AutoDome 300 Series PTZ Camera System
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution NTSC: 470 TVL, typical
PAL: 480 TVL, typical
Sensitivity (typical)
7
30 IRE 50 IRE
Day Mode
SensUp Off 0.5 lx 1.0 lx
SensUp On (15x) 0.0052 lx 0.013 lx
Night Mode
SensUp Off 0.10 lx 0.26 lx
SensUp On (15x) 0.0013 lx 0.0026 lx
Electronic Shutter Speed
(AES)
1 to 1/10,000
SNR >50 dB
White Balance 2000 K to 10,000 K
7 F1.6, 1/60 (1/50) shutter, max AGC.
Camera 18x Day/Night
Imager 1/4 in. Exview HAD CCD
(752 x 582 PAL)/(768 x 494 NTSC)
Lens 18x Zoom (4.1–73.8 mm)
F1.4 to F3.0
Focus Automatic with manual override
Iris Automatic with manual override
Field of View 2.7° to 48°
Video Output 1.0 Vp-p, 75 Ohm
Gain Control Off/Auto (with adjustable limit)
Synchronization Line-Lock (–120° to 120° vertical phase
adjust) or internal crystal
Aperture Correction Horizontal and vertical
Digital Zoom 12x
Horizontal Resolution NTSC: 470 TVL, typical
PAL: 480 TVL, typical
Sensitivity (typical)
8
30 IRE 50 IRE
Day Mode
SensUp Off 0.4 lx 0.7 lx
SensUp On (15x) 0.0041 lx 0.0082 lx
Night Mode
SensUp Off 0.05 lx 0.17 lx
SensUp On (15x) 0.0007 lx 0.0013 lx
Electronic Shutter Speed
(AES)
1 to 1/10,000
SNR >50 dB
White Balance 2000 K to 10,000 K
8 F1.4, 1/60 (1/50) shutter, max AGC.
Mechanical/Electrical
Model In-Ceiling Indoor
Pendant
EnviroDome®
Weight 2.66 kg
(5.86 lb)
2.88 kg
(6.3 lb)
3.32 kg
(7.3 lb)
Pan Range 360° cont. 360° cont. 360° cont.
Tilt Angle 1° above
horizon
18° above
horizon
18° above
horizon
Variable Speed 0.1°/s-120°/s 0.1°/s-120°/s 0.1°/s-120°/s
Pre-position
Speed
Pan: 360°/s
Tilt: 100°/s
Pan: 360°/s
Tilt: 100°/s
Pan: 360°/s
Tilt: 100°/s
Preset
Accuracy
± 0.1° typ. ± 0.1° typ. ± 0.1° typ.
Power 21-30 VAC
50/60 Hz
21-30 VAC
50/60 Hz
21-30 VAC
50/60 Hz
Power Draw: (typ)
Analog
Models
10 W 10 W 46 W
9
Ethernet
Models
14 W 14 W 50 W
9
9 Add 16 W if using VG4-SHTR-XT kit.
Surge Suppression
Protection on
Video
Peak current 10 kA (Gas Tube Arrester), peak
power 1000 W (10/1000 μ)
Protection on
RS-232/485,
Biphase
Peak current 10 A, peak power 300 W (8/20 μ)
Protection on
Alarm Inputs
Peak current 17 A, peak power 300 W (8/20 μ)
Protection on
Alarm Outputs
Peak current 2 A, peak power 300 W (8/20 μ)
Protection on
Relay Outputs
Peak current 7.3 A, peak power 600 W
(10/1000 μ)
Protection on
Power Input
(Dome)
Peak current 7.3 A, peak power 600 W
(10/1000 μ)
Protection on
Power Output
(Arm Power
Supply)
Peak current 21.4 A, peak power 1500 W
(10/1000 μ)
5 | AutoDome 300 Series PTZ Camera System
Environmental
Model In-Ceiling Indoor
Pendant
EnviroDome®
Design
Rating
Plenum Rated IP66 IP66
Operatin
g Temp.
–10°C to 50°C
(14°F to
122°F)
–10°C to 50°C
(14°F to
122°F)
–40°C to 50°C
(–40°F to 122°F)
Storage
Temp.
–40°C to 60°C
(–40°F to
140°F)
–40°C to 60°C
(–40°F to
140°F)
–40°C to 60°C
(–40°F to 140°F)
Humidity 0% to 90%
relative, noncondensing
0% to 90%
relative, noncondensing
0% to 100%
relative,
condensing
ProtectionIP 66, IK 8 (IEC 62262)
Miscellaneous
Sectors/Titling 16 independent sectors with 20-character titles/
sector
Camera Setup/
Control
Biphase, RS-232, RS-485, Bilinx
10
(coax)
Communication
s Protocols
Biphase, Bilinx10, Pelco P, and Pelco D
Pre-positions 99, each with 20-character titles
Guard Tours Two (2) types of tours:
• Recorded tours - two (2), total duration
15 minutes
• Preset tour - one (1), consisting of up to 99
scenes, consecutively and (1) customized
up to 99 scenes
Supported
Languages
Czech, Dutch, English, French, German, Italian,
Polish, Portuguese, Russian and Spanish
10 Bilinx not available on Ethernet models.
Cable Compensation
Max Distance With Pre-comp OFF With Pre-comp ON
RG-59/U 1000 ft (300 m) 2000 ft (600 m)
RG-6/U 1500 ft (450 m) 3000 ft (900 m)
RG-11/U 2000 ft (600 m) 4000 ft (1200 m)
Cat5/UTP
(Passive receiver)
750 ft (225 m) 1500 ft (450 m)
User Connections
Power (Camera) 21-30 VAC, 50/60 Hz
Power (Heater) 21-30 VAC, 50/60 Hz
Biphase ± Control Data
Audio Line In
11
9 K Ohm typ, 5.5 Vp-p max
RS-232 RX/TX or RS-485 ± - optional control data
(dip switch selectable)
Video BNC/UTP
12
EOLR Alarm Inputs (2) Programmable for
“normally open”, "normally closed",
“normally open-supervised”, “normally
closed-supervised”
Alarm Inputs (5) Programmable for
“normally open” or "normally closed"
Relay Out (1) Dry contact output rating:
2 A @ 30 VAC
Open Collector Outputs
(3)
32VDC@150 ma max
11 With Ethernet models, the biphase ± can optionally be used as the audio line in
connector.
12 Ethernet models have no UTP analog output only BNC (coax).
Mounts/Accessories
Pendant Mounts
Arm Mounts
Wall Arm (No Transformer) VG4-A-PA0
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 /
VG4-A-PA2
Wall Arm (120/230 VAC Transformer
and Fiber Optics)
VG4-A-PA1F /
VG4-A-PA2F
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate VG4-A-9542
Mast (Pole) Mounting Plate VG4-A-9541
Pipe Mounts
Pipe Mount Cap VG4-A-9543
Roof Mounts
Roof (Parapet) Mount VG4-A-9230
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount LTC 9230/01
Power Supplies
Outdoor Power Supply Box
(120/230 VAC Transformer)
VG4-A-PSU1 /
VG4-A-PSU2
Outdoor Power Supply Box
(120/230 VAC Transformer and Fiber
Optics)
VG4-A-PSU1F /
VG4-A-PSU2F
Extended temp heater
module extends temperature
range to –60°C (–76°F) for EnviroDome
®
only
VG4-SHTR-XT
6 | AutoDome 300 Series PTZ Camera System
Loading...