Bosch DINION 4000 AN, VBN-4075-C11, VBN-4075-C51, VBC-4075-C11, VBC-4075-C51 Specification

Video | DINION 4000 AN

DINION 4000 AN

www.boschsecurity.com

TVL

960H

u Ultra high resolution 960H (1/3“) sensor

u Digital extended dynamic range

u Digital noise reduction

u Easy to install

u True day/night version

DINION 4000 cameras are compact analog cameras
that offer excellent resolution in variable lighting
conditions, day or night. The high performance 960H
1/3‑inch CCD sensor provides a resolution of 720TVL.
The cameras are an ideal solution for demanding
scene conditions. The backlight compensation and
highlight compensation features optimize the image
visibility in high-contrast areas, automatically
compensating for bright backgrounds and strong light
sources.
The cameras are easy to install and parameters can be
set individually. Privacy zones and motion detection
functions can be set up in the handy camera menu
system.
The true day/night version automatically switches from
color to monochrome using a mechanical IR filter
depending on the available light.

System overview

The camera is supplied ready to operate – simply
attach the lens, connect video and then power. For
especially challenging situations where fine tuning or
special settings are required, the camera parameters
can be individually set using the control buttons on the
side of the camera and an On-Screen Display (OSD).

Functions

Day/Night mode

The true day/night version provides enhanced night
viewing. The mechanical IR filter can switch from color
to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can
be switched manually via the alarm input or through
the camera.

Ideal picture performance

There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:

• BLC – automatically and dynamically compensates for
strong backlight

• HLC – reduces glare from highlight areas

• Digital dynamic range – extends dynamic range of
visible areas

• Contrast and sharpness – enhance details in bright or
misty scenes

• Dynamic noise reduction – dynamically reduces noise
in the picture

Privacy masking

Eight different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.

Video Motion Detection

The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal (the true day/night version can close
the output relay).

Typical applications:

• Museums and art galleries

• Shopping centers

• Offices

• Schools, colleges and universities

• Petrol/gas stations

Certifications and approvals

Standards

Safety
(low voltage
versions)

EN 60950-1
UL 60950-1 (2nd edition)
CSA C22.2 No. 60950-1-07 (2nd edition)

Safety
(high voltage
versions)

EN 60950-1

C-Tick

Emission EN 55022 class B, FCC part 15 class B,

EN61000-3-2, EN61000-3-3

Immunity EN 50130-4, EN 50121-4

Vibration Camera with 500 g (1.1 lbs) lens according to

IEC 60068-2-6

Region Certification

Europe CE

CE High Voltage

USA UL

FCC

Canada CSA

Technical specifications

Image Sensor 960H, 1/3" CCD, sensor

resolution 720TVL

System PAL or NTSC

Total pixels (H x V) 1020 x 596 (PAL)

1020 x 508 (NTSC)

Effective pixels (H x V) 976 x 582 (PAL)

976 x 494 (NTSC)

Video Output Composite: 1 Vpp, 75 Ohm

Sync. System Internal sync., Line-lock

S/N Ratio (sharpness, AGC off) 52 dB min.

Minimum Illumination (F1.2,
50IRE)

Color: 0.1 lx
B/W: 0.02 lx (true D/N version)

Minimum Illumination (F1.2,
30IRE)

Color: 0.05 lx
B/W: 0.01 lx (true D/N version)

Manual shutter 1/50 – 1/10,000 (PAL)

1/60 – 1/10,000 (NTSC)

Digital Noise reduction 2DNR

White Balance ATW, Push, User1, User2, Anti

CR, Manual, Push lock

Light compensation OFF/BLC/HLC

Digital Dynamic Engine On, Off

AGC On, Off

Day/Night Auto, Color, B/W

Burst On, Off

Motion detection 4 programmable zones

Privacy 8 programmable zones (4 zones

when motion detection is on)

Mirror On (horizontal), Off

Sharpness 0 ‑ 255

Alarm input
(true D/N version only)

Night mode active profile
switching, 3.3 V nominal,
+40 VDC max.

Alarm output
(true D/N version only)

Night mode active, 30 VAC or
+40 VDC, max. 0.5 A continuous,
10 VA

OSD language English, Japanese, German,

French, Russian, Portuguese,
Spanish, Simplified Chinese

Lens type Manual, DC Iris

DC Iris drive: 50 mA max.

Lens mount CS (max. lens protrusion 5 mm

[0.2 in])
C-mount compatible with optional
adapter ring

Tripod mount Bottom (isolated) and top 1/4-

inch 20 UNC

Supply Voltage
(VBx-4075-C11, VBx-4075-C21)

12 VDC / 24 VAC

Supply Voltage
(VBx-4075-C51)

230 VAC

Power Consumption (true D/N
version)

3.6 W max. / 0.3 A

Power Consumption (electronic
D/N version)

2.4 W max. / 0.2 A

Dimensions (without lens) 58 x 66 x 122 mm

2.28 x 2.6 x 4.8 in

Weight (12 VDC/24 VAC) 500 g (1.10 lbs) without lens

Weight (230 VAC) 600 g (1.32 lbs) without lens

2 | DINION 4000 AN