Bosch UML-190-90 Installation Manual

Bosch 19-inch High-resolution LCD Monitor

UML-190-90

en Installation Manual

UML-190-90 | en iii

Table of Contents

1Safety 1

1.1 Important safety instructions 1

1.2 Safety precautions 2

1.3 Important notices 3

1.4 Customer Support and Service 6

2 Unpacking 7

2.1 Parts List 7

3 Exploded View 8

4Description 10

4.1 Features 10

4.2 Power 10

5 Installing the UML-190-90 11

5.1 Mounting the UML-190-90 11

5.1.1 Desktop Installation 11

5.1.2 Wall Mount Installation 11

5.2 Connecting the Composite Video Signal to the Monitor 13

5.3 Connecting the Y/C (S-Video) Signal to the Monitor 13

5.4 Connecting the PC Signal to the Monitor 13

5.5 Ventilation 14

5.6 Single / Multiple Monitor Configuration 14

6 Navigating the Monitor 15

6.1 Navigating the Front Panel 15

6.2 Navigating the Monitor On-screen Display (OSD) 16

6.3 On-screen Display Menus 17

6.4 Video Mode 18

6.5 Screen 18

6.6 Audio 19

6.7 OSD 19

6.8 Color (PC mode) 20

6.9 Utility 20

6.10 Exit 21

7 Power Management 22

7.1 Power Consumption 22

7.2 LED Indicator 22

8 Trouble Shooting Guide 23

9 Maintenance 24

10 Technical Specifications 25

Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09

iv en | UML-190-90

F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc.

UML-190-90 Safety | en 1

1Safety

1.1 Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.

1. Heat Sources - Do not install the unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.

2. Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent
overheating and ensure reliable operation. Do not block or cover these openings. Do not
place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's
instructions have been adhered to.

3. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink,
laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture.

4. Object and liquid entry - Never push objects of any kind into this unit through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire
or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.

5. Lightning - For added protection during a lightning storm, or when leaving this unit
unattended and unused for long periods, unplug the unit from the wall outlet and
disconnect the cable system. This will prevent damage to the unit from lightning and
power line surges.

6. Controls adjustment - Adjust only those controls specified in the operating instructions.
Improper adjustment of other controls may cause damage to the unit. Use of controls or
adjustments, or performance of procedures other than those specified, may result in
hazardous radiation exposure.

7. Overloading - Do not overload outlets and extension cords. This can cause fire or
electrical shock.

8. Power cord and plug protection - Protect the plug and power cord from foot traffic,
being pinched by items placed upon or against them at electrical outlets, and its exit
from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output
power cord must comply with the latest versions of IEC Publication 227 or IEC Publication

245.

9. Power disconnect - Units with or without ON/OFF switches have power supplied to the
unit whenever the power cord is inserted into the power source; however, the unit is
operational only when the ON/OFF switch is in the ON position. The power cord is the
main power disconnect device for switching off the voltage for all units.

10. Power sources - Operate the unit only from the type of power source indicated on the
label. Before proceeding, be sure to disconnect the power from the cable to be installed
into the unit.
– For battery powered units, refer to the operating instructions.
– For external power supplied units, use only the recommended or approved power

supplies.

– For limited power source units, this power source must comply with EN60950.

Substitutions may damage the unit or cause fire or shock.

– For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%,

or 28 VAC. User-supplied wiring must comply with local electrical codes (Class 2

Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09

2 en | Safety UML-190-90

power levels). Do not ground the supply at the terminals or at the unit's power
supply terminals.

– If unsure of the type of power supply to use, contact your dealer or local power

company.

11. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.

12. Damage requiring service - Unplug the unit from the main AC power source and refer
servicing to qualified service personnel when any damage to the equipment has occurred,
such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating

instructions.

13. Replacement parts - Be sure the service technician uses replacement parts specified by
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.

14. Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.

15. Installation - Install in accordance with the manufacturer's instructions and in
accordance with applicable local codes.

16. Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority

to operate the equipment.

1.2 Safety precautions

DANGER! High risk:

This symbol indicates an imminently hazardous situation such
as “Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.

WARNING! Medium risk:
Indicates a potentially hazardous situation.

!

!

F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc.

If not avoided, this could result in serious bodily injury or death.

CAUTION! Medium risk:
Indicates a potentially hazardous situation.
If not avoided, this may result in minor or moderate injury.
Alerts the user to important instructions accompanying the
unit.

UML-190-90 Safety | en 3

CAUTION! Low risk: (without safety alert symbol)

Indicates a potentially hazardous situation.
if not avoided, this may result in property damage or risk of
damage to the unit.

NOTICE!

This symbol indicates information or a company policy that

i

relates directly or indirectly to the safety of personnel or
protection of property.

1.3 Important notices

Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit

may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,
stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use
caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to
overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at
least 3 mm in each pole, into the electrical installation of the building.
If it is needed to open the housing for servicing and/or other activities, use this all-pole switch
as the main disconnect device for switching off the voltage to the unit.

Coax grounding:

– Ground the cable system if connecting an outside cable system to the unit.
– Connect outdoor equipment to the unit's inputs only after this unit has had its grounding

plug connected to a grounded outlet or its ground terminal is properly connected to a
ground source.

– Disconnect the unit's input connectors from outdoor equipment before disconnecting the

grounding plug or grounding terminal.

– Follow proper safety precautions such as grounding for any outdoor device connected to

this unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
Disposal - Your Bosch product was developed and manufactured with high-quality material
and components that can be recycled and reused. This symbol means that electronic and elec­trical appliances, which have reached the end of their working life, must be collected and dis­posed of separately from household waste material. Separate collecting systems are usually in
place for disused electronic and electrical products. Please dispose of these units at an envi­ronmentally compatible recycling facility, per European Directive 2002/96/EC.

Environmental statement - Bosch has a strong commitment towards the environment. This
unit has been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid
electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when
handling the electrostatic-sensitive printed circuit boards.

Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09

4 en | Safety UML-190-90

Fuse rating - For security protection of the device, the branch circuit protection must be

secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC
Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current
line plug (a plug with one blade wider than the other blade). This safety feature allows the
plug to fit into the power outlet in only one way. If unable to insert the plug fully into the
outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for
earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally certified electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive
force or shock may damage the unit and the hard disk drives.
Permanently connected equipment - Incorporate a readily accessible disconnect device in
the building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
Power disconnect - Units have power supplied whenever the power cord is inserted into the
power source. The power cord is the main power disconnect for all units.

Rack-mount

– Ventilation - Do not place this unit in a built-in installation or rack without proper

ventilation or adhering to the manufacturer's instructions. The equipment must not
exceed its maximum operating temperature requirements.

– Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous

condition due to uneven mechanical loading.

SELV

– All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits

should only be connected to other SELV circuits.

– Because the ISDN circuits are treated like telephone-network voltage, avoid connecting

the SELV circuit to the Telephone Network Voltage (TNV) circuits.

NOTICE!

This is a class A product. In a domestic environment this

i

FCC & ICES Information

(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
– this device may not cause harmful interference, and
– this device must accept any interference received, including interference that may cause

undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his expense.

F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc.

product may cause radio interference, in which case the user
may be required to take adequate measures.

UML-190-90 Safety | en 5

Intentional or unintentional modifications, not expressly approved by the party responsible for
compliance, shall not be made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet
is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004­000-00345-4.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL
60950-1. UL Certification does not cover the performance or reliability of the security or
signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.

Copyright

This user guide is the intellectual property of Bosch Security Systems and is protected by
copyright.
All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.

NOTICE!

This user guide has been compiled with great care and the
information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing

i

More information

For additional information, please contact the Bosch Security Systems location nearest you or
visit our web site at www.boschsecuritysystems.com

development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user
guide and the product described.

Bosch Security Systems, Inc. Installation Manual F01U075712 | 1.0 | 2007.09

6 en | Safety UML-190-90

1.4 Customer Support and Service

If this unit needs service, contact the nearest Bosch Security Systems Service Center for
authorization to return and shipping instructions.

Service Centers
USA

Telephone: [phone] or 585-340-4162
Fax: [phone]
Email: [e-mail]

Customer Service

Telephone: [phone]
Fax: [phone]
Email: [e-mail]

Technical Support

Telephone: [phone]
Fax: [phone] or 717-735-6560
Email: [e-mail]

Repair Center

Telephone: [phone]
Fax: [phone] or 717-735-6561
Email: [e-mail]

Canada

Telephone: [phone]
Fax: [phone]

Europe, Middle East & Asia Pacific Region

Telephone: [phone]
Fax: [phone]
Email: [e-mail]

More information

For additional information, please contact your Bosch Security Systems representative or visit
our web site at www.boschsecurity.com

F01U075712 | 1.0 | 2007.09 Installation Manual Bosch Security Systems, Inc.