Bosch UHO-POE-10 Specsheet

Video | UHO-POE-10 Outdoor housing, POE + power supply

UHO-POE-10 Outdoor housing, POE +
power supply

www.boschsecurity.com

u Protects camera/lens combinations up to 268 mm

(10.6 inch) in length

The PoE camera housing is a smartly styled enclosure
that enables you to use a DINION camera in an
outdoor or indoor environment, or in areas where the
camera needs to be protected.
This housing is supplied with power via the PoE
Ethernet connection or, alternatively, via a separate a
12 VDC power supply.

System overview

Secure

The sturdy housing design meets IP67 and NEMA 4X
standards to protect your video surveillance
equipment from adverse elements. A built-in heater
and fan keep the internal temperature of the housing
within the specified operating temperatures, and also
keep the housing window clear in high humidity and
icy conditions. A sunshield is fitted to the top of the
housing.

Functions

Easily installed

The unique, hinged, side-opening design in the housing
provides easy access to the camera/lens controls
when mounting. Tamper-resistant screws for the
locking clasps prevent unauthorized access to the

u Stylish and sturdy housing (IP67; NEMA 4x)

u PoE power input for single cable installation

u Hinged side opening for easy installation and

camera setup

u Heater

housing. Mounting holes on the base of the housing
allow maximum mounting flexibility to fixed, swivel
and tilt head bracket mounts.

Rugged

With a sleek design that meets IP67 and NEMA-4X
standards, the PoE housing is the ideal solution for
protecting your video surveillance equipment from
adverse elements.

Connections

A single cable gland (M25 x 1.5) in the foot of the
housing allows a seal-tight connection for Ethernet
(PoE) power, and optionally, 12 VDC and alarm or
audio cables. The housing and camera are powered via
a PoE Ethernet cable or, in the absence of PoE, via an
external 12 VDC power supply routed through the
housing power supply.

Certifications and approvals

Safety acc. to EN 60065-1 (CE)

Immunity acc. to EN 50130-4 (CE)

Emission acc. to EN 55022 class B (CE)

acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B

430 (16.9)

70 (2.8)

141 (5.6)

1/4 in.

51 (2)

74 (2.9)

M25 x 1.5

268 (10.6)

80 (3.2)

164 (6.5)

Max. camera/lens size (H x W x D):
70 x 80 x 268 mm (2.8 x 3.2 x 10.6 in)

mm (in)

2 | UHO-POE-10 Outdoor housing, POE + power supply

Region Regulatory compliance/quality marks

Europe CE F01U300502_KOE102

USA UL

FCC

Installation/configuration notes

Max. camera + lens

70 x 80 x 268 mm (2.8 x 3.2 x 10.6 in)

size (H x W x L)

Mounting holes 2x pair of 1/4-20 tapped holes

inner pair: 51 mm (2.0 in) center-to-center
outer pair: 74 mm (2.9 in) center-to-center

Electrical

Power supply Power-over-Ethernet Plus (PoE+) IEEE

802.3at, 48 VDC nominal; or
12 VDC (switchable)

Power consumption

14 W max.

(housing only)

Power handling

25.5 W max.

(housing + camera)

Environmental

Operating

-30 °C to +50 °C (‑22 °F to +122 °F)
temperature ­external

Operating
temperature -

1

internal

-20 °C to +50 °C (‑4 °F to +122 °F)

Enclosure protection2IP67, NEMA-4X

*For use with an LLDP enabled switch the UHO-POE-10 must be used with a Bosch IP

camera with firmware 6.43 or higher and additional power must be assigned in the

camera's network settings.

Parts included

QuantityComponent

1 Unit

Technical specifications

Mechanical

Dimensions
(H x W x L)

141 x 164 x 430 mm (5.6 x 6.5 x 16.9 in.)
including sunshield

Weight 2.2 kg (4.9 lb)

Construction Aluminum casing, silicone gaskets, all

stainless steel hardware

Color Gray

Window 3 mm (0.12 in) glass

NEMA TS 2-2003

-34 ºC to +74 ºC (-30 ºF to +165 ºF)
(R2008),
para 2.1.5.1 using
fig. 2.1 test profile

1 refer to camera specification to ensure compliance with internal temperature limits

2 for extreme environments, refer to the Bosch Extreme product range

Ordering information

UHO-POE-10 Outdoor housing, POE + power supply

Outdoor camera housing with PoE+ power supply.

Order number UHO-POE-10

Locking clasps Tamper-resistant screws provided

Camera mounting Removable camera/lens tray, mounted with

two screws