Bosch Sense T, Sense S User Manual

Sense S | Sense T | Asset Monitoring and Tracking Sensor

1 | 11

Data subject not change without notice | Printed in Germany | May 23, 2018

Bosch Connected Industry

Sense T | Sense S

Asset Monitoring and Tracking Sensor

Sense S | Sense T | Asset Monitoring and Tracking Sensor

2 | 11

Data subject not change without notice | Printed in Germany | May 23, 2018

Bosch Connected Industry

Sense T | Sense S

Asset Monitoring and Tracking Sensor

Sense S | Sense T | Asset Monitoring and Tracking Sensor

3 | 11

Data subject not change without notice | Printed in Germany | May 23, 2018

Bosch Connected Industry

Table of contents

1 Introduction 4

2 Radio Frequency Radiation Exposure and Further Information 5

3 Technical Specifications 5

4 Ordering Information 6

5 Mounting 7

6 Operations 7

7 Dimensions 8

8 Handling and Shipping Information 8

9 Support 8

10 Disposal 9

11 Regulatory Notes 9

12 Intended Use 10

13 Safety Notes 10

Sense S | Sense T | Asset Monitoring and Tracking Sensor

4 | 11

Data subject not change without notice | Printed in Germany | May 23, 2018

Bosch Connected Industry

1 Introduction

By being attached to the asset and measuring environmental parameters such as temperature and shock events, the Sense
S and Sense T beacons make the management of assets and material flow transparent and traceable.
Tracking data and measured values are transferred to the Bosch IoT Cloud via Bosch Connect gateways or mobile
applications.
The Bosch Connected Industry Sense S and Sense T beacons are battery-operated devices for asset tracking, freight
tracking and other tracking or monitoring use cases.
Sense S and Sense T use a 2.4 GHz Low Energy radio and a RFID UHF interface to communicate with corresponding
receivers for data transmission and configuration.

Sense S and Sense T provide

 a unique visual ID (GIAI code) as DMC readable by standard scanner applications
 a unique electronic ID transmitted via 2.4 GHz wireless technology to be captured by Bosch Connect gateways or

standard Android smartphone apps

 a temperature value for the ambient condition
 a shock intensity value measured by the integrated acceleration sensor (Sense S only)
 a battery assisted passive RFID interface to read the electronic ID