Bosch SE8830S304 User Manual

Systems | SE88 Series Panic Transmitters

SE88 Series Panic Transmitters

Supervision

▶

Manual duress alarm

▶

Test mode

▶

Low battery indication

▶

Water resistant

▶

With the appropriate hardware accessory, an SE88 Series
Panic Transmitter model can be worn like a watch, around
the neck like a pendant, or mounted on a stationary
location with a mounting bracket. During an alarm, the
transmitter sends the person’s identity and location to the
central console at the security office. It is ideal for use in
elder care or assisted living facilities that require
immediate emergency notification.

System Overview

During an emergency, the person presses and holds the
alarm button to produce an alarm. Generally the system
sounders, strobes, or sirens activate within two seconds.

The alarm signal transmits to the receivers which relay the
alarm signal to the transponder and to the central
console.

The central console shows the person’s location on a
map, along with a photograph, name, and vital information
such as a medical condition or disability.

Functions

Supervision

The transmitter can send a tracking signal to the central
console every 32 seconds or 65 minutes depending on the
transmitter model. The tracking signal updates the
person’s location. The central console can also use the
tracking signal to alert staff if residents or items move
away from a defined area.

Manual Duress Alarm

Press the large button on the transmitter to send an
alarm. During the alarm, the transmitter automatically
continues to transmit every seven seconds, providing the
most current location information.

Test Mode

The SE88‑30S‑304 automatically tests itself every
30 seconds. The SE88‑60M‑304 automatically tests itself
every 60 minutes. A user (subscriber) can also press the
small button to perform a manual test anywhere in the
protected area. When the user sees an indoor receiver or
an outdoor strobe, the user can press the manual test
button to perform a test. A small green light flashes on an
indoor receiver or the strobe flashes during a successful
test. The visual indicators (flashing green light or strobe
light) are absent when the test fails. The central console

www.boschsecurity.com

2 | SE88 Series Panic Transmitters

software records the successful tests in the subscriber
(user) database. The information can be printed on an
optional printer.

When the transmitter is sending an alarm, the user can
use the manual test button to stop the alarm and reset
the transmitter.

Low Battery Indication

When the transmitter’s battery needs replacing, the test
signal includes a low battery message to the central
console. The central console software records the low
battery messages in the subscriber (user) database. The
information can be printed on an optional printer.

Database

The subscriber (user) database contains user information,
including the date and time of the most recent transmitter
test. You can search the subscriber (user) database to
find people who neglected to test their transmitters
within a specified time period.

Certifications and Approvals

Region Certification

USA FCC ESV-0117-05

Canada IC 1249104514A

Electrical

Battery Life: 200 days (SE88‑30S‑304)

Up to 3 years (SE88‑60M‑304)

Battery Replacements:

Duracell® DL2032, Eveready

®

CR2032, Panasonic® CR2032

Battery Type: Lithium Coin Cell Battery

Physical

Color: Light gray

Dimensions: 3.3 cm x 4.6 cm x 1.3 cm

(1.3 in. x 1.8 in. x 0.5 in.)

Material:

Cycolac® ABS

Properties: Water resistant

Environmental

Operating Temperature Range: -20°C to +60°C

(-4°F to +140°F)

Trademarks

Cycolac® is a registered trademark of General Electric (GE) Corporation,
USA, in the United States and/or other countries.
Duracell® is a registered trademark of the Gillette Company, USA, in the
United States and/or other countries.
Eveready® is a registered trademark of Eveready Battery Company, Inc.
Panasonic® is a registered trademark of Matsushita Electric Industrial Co.,
Ltd.

Australia C-tick

Installation/Configuration Notes

Compatibility Information

Alert Units: EA120B

Central Console Software: SE2000 Series

Receivers: EA102A‑304

Transmitters: SE2 Series, SE3 Series, and SE3401

Transponder: EA500B

Technical Specifications

Transmission

Frequency: 304 MHz

Number of Transmitters per Sys­tem

75 (SE88-30S-304)
1,000 (SE88-60M-304)

Antenna Type Internal

Trouble Output Sent through central console

Ordering Information

SE88‑30S‑304 Transmitter (32 seconds,
304 MHz)

Sends a supervisory signal every 32 seconds
and has an estimated battery life of
200 days. One system supports up to 75
transmitters.

SE88‑60M‑304 Transmitter (65 minutes,
304 MHz)

Sends a supervisory signal every 65 minutes
and has an estimated battery life of three
years. One system supports up to 1,000
transmitters.

SE88-30S-304

SE88-60M-304

Americas:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

© Bosch Security Systems Inc. 2011 | Data subject to change without notice
T1177613195 | Cur: en-US, V9, 19 Jan 2011

Europe, Middle East, Africa:

Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Asia-Pacific:

Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

Represented by