Bosch NETP666SUC/01, NETP066SUC/01 Owner’s Manual
Use and Care Manual
NETP066SUC
0 6" 0 9"/6" 0 6"
(14) (23_14) (14)
88_
_L) © ©8
NETP666SUC
07"
(s)
0 12"/8"/6"
(27/21/14)
0 7"/5" 0 7"
(18/12) (16)
O 7"
(18)
0 8"/5"
(19.5/12)
() cm
Table of Contents
Safety Definitions .......................................................... 4
IMPORTANT SAFETY INSTRUCTIONS ........................ 5
Fire Safety .............................................................................. 5
Cooking Safety ...................................................................... 5
Burn Prevention .................................................................... 6
Child Safety ........................................................................... 6
Cleaning Safety ..................................................................... 6
Cookware Safety .................................................................. 6
Proper Installation and Maintenance ................................ 6
State of California Proposition 65 Warnings ................... 7
Causes of damage ......................................................... 8
Protecting the environment .......................................... 8
Energy-saving advice ........................................................... 8
Getting familiar with the appliance .............................. 9
Control panel ......................................................................... 9
Heating elements .............................................................. 10
Residual heat indicator .................................................... 10
Operation ...................................................................... 10
Main power switch ............................................................ 10
Main power switch ............................................................ 10
Setting the cooktop ........................................................... 11
PowerStart TM feature ......................................................... 12
AutoChef TM .......................................................................... 13
Cook time ........................................................................... 16
Kitchen timer ...................................................................... 16
Keep warm function .......................................................... 17
Child lock ............................................................................ 17
Clean Lock .......................................................................... 17
Automatic Shutoff .............................................................. 17
Basic Settings .................................................................... 17
Cleaning and Maintenance ......................................... 19
Daily Cleaning .................................................................... 19
Cleaning guidelines .......................................................... 19
Cleaning charts .................................................................. 19
Maintenance ....................................................................... 20
Service .......................................................................... 20
Troubleshooting ................................................................. 20
Technical service ............................................................... 21
STATEMENT OF LIMITED PRODUCT WARRANTY ... 22
What this Warranty Covers & Who it Applies to .......... 22
How Long the Warranty Lasts ......................................... 22
Repair/Replace as Your Exclusive Remedy ................ 22
Out of Warranty Product .................................................. 22
Warranty Exclusions ......................................................... 22
Additional information on products, accessories,
replacement parts and services can be found at
www.bosch-home.com and in the online shop
www.bosch-home.comluslstore
Safety Definitions
WARNING
This indicates that death or serious injuries may
occur as a result of non-observance of this warning.
CAUTION
This indicates that minor or moderate injuries may
occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-compliance with
this advisory.
Note: This alerts you to important information and/or
tips.
A
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using kitchen appliances, basic safety precautions
must be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of
transport damage, do not plug it in.
Fire Safety
Do not allow aluminum foil, plastic, paper or cloth to
come in contact with a hot surface element, burner or
grate. Do not allow pans to boil dry.
If the cooktop is near a window, forced air vent or fan, be
certain that flammable materials such as window
coverings do not blow over or near the burners or
elements. They could catch on fire.
Always have a working smoke detector near the kitchen.
Never leave the cooktop unattended when in use.
Boilovers cause smoking and greasy spillovers may
ignite.
WARNING
TO REDUCE THE RISK OF A GREASE FIRE:
a. Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that
may ignite. Heat oils slowly on low or medium settings.
b. Always turn hood ON when cooking at high heat.
c. Clean ventilating fans frequently. Grease should not be
allowed to accumulate on fan or filter.
d. Use proper pan size. Always use cookware
appropriate for the size of the surface element.
Do not fiambe under the extractor hood or work with a
naked flame. When switched on, the extractor hood
draws flames into the filter. There is a risk of fire due to
deposits on the grease filter!
In the event that personal clothing or hair catches fire,
drop and roll immediately to extinguish flames.
Have an appropriate fire extinguisher available, nearby,
highly visible and easily accessible near the appliance.
Smother flames from food fires other than grease fires
with baking soda. Never use water on cooking fires.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE EVENT OF A GREASE FIRE, OBSERVE THE
FOLLOWING:
a. SMOTHER FLAMES with a close-fitting lid, cookie
sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do not
go out immediately, EVACUATE AND CALL THE FIRE
DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN - You may be
burned.
c. DO NOT USE WATER, including wet dishcloths or
towels - a violent steam explosion will result.
d. Use an extinguisher ONLY if:
- You know you have a Class ABC extinguisher, and
you already know how to operate it.
- The fire is small and contained in the area where it
started.
- The fire department is being called.
- You can fight the fire with your back to an exit.
Whenever possible, do not operate the ventilation system
during a cooktop fire. However, do not reach through fire
to turn it off.
Cooking Safety
WARNING
Use this appliance only for its intended use as described
in this manual. NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
overheating the appliance. Never use the appliance for
storage.
When using the timer, always supervise the cooktop and
do not allow anything to boil over or burn. Boilovers can
cause smoke and some foods and oils may catch fire if
left on high temperature settings.
WARNING
If the frying sensor is not working properly, overheating
may result causing smoke and damage to the pan or fire.
WHEN COOKING WITH THE FRYING SENSOR
OBSERVE THE FOLLOWING:
o Use a system pan only
o Always put the pan in the centre of the heating element
o Do not place a lid on the pan
o Never leave frying fat unattended
Never use the appliance if liquids or foods have spilled
around the control panel. Always turn off the cooktop
and dry the control panel.
Injury and damage to the appliance may occur if control
elements are not used properly.
5
A
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
If the cooktop turns off automatically and can no longer
be operated, it may turn itself on unintentionally at a later
point. Switch off the circuit breaker in the fuse box.
Contact the after-sales service.
WARNING
If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
Burn Prevention
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not
touch, or let clothing, potholders, or other flammable
materials contact surface units or areas near units until
they have had sufficient time to cool. Among these areas
are the cooktop and areas facing the cooktop.
Do not heat or warm unopened food containers. Build-up
of pressure may cause the container to burst and cause
injury.
Always use dry potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Use high heat settings on the cooktop only when
necessary. To avoid bubbling and splattering, heat oil
slowly on no more than a low-medium setting. Hot oil is
capable of causing extreme burns and injury.
Never move a pan of hot oil, especially a deep fat fryer.
Wait until it is cool.
Secure all loose garments, etc. before beginning. Tie
long hair so that it does not hang loose, and do not wear
loose fitting clothing or hanging garments, such as ties,
scarves, jewelry, or dangling sleeves.
WARNING
RISK OF BURNS
Metallic objects become hot very quickly on the cooktop.
Never set down metallic objects, such as knives, forks,
spoons and lids on the cooktop.
If the display does not work when a cooking area is
heating up, disconnect the circuit breaker from the fuse
box. Contact an authorized servicer.
Child Safety
When children become old enough to use the appliance,
it is the legal responsibility of the parents or legal
guardians to ensure that they are instructed in safe
practices by qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on
any part of an appliance, especially a door, warming
drawer, or storage drawer. This can damage the
appliance, and the unit may tip over, potentially causing
severe injury.
Do not allow children to use this appliance unless closely
supervised by an adult. Children and pets should not be
left alone or unattended in the area where the appliance
is in use. They should never be allowed to play in its
vicinity, whether or not the appliance is in use.
CAUTION
Items of interest to children should not be stored in an
appliance, in cabinets above an appliance or on the
backsplash. Children climbing on an appliance to reach
items could be seriously injured.
Cleaning Safety
Do not clean the appliance while it is still hot. Some
cleaners produce noxious fumes when applied to a hot
surface. Wet clothes and sponges can cause burns from
steam.
Do not use steam cleaners to clean the appliance.
Cookware Safety
Hold the handle of the pan when stirring or turning food.
This helps prevent spills and movement of the pan.
Use Proper Pan Size.
The use of undersized cookware will expose a portion of
the heating element or burner to direct contact and may
result in ignition of clothing. Select cookware having flat
bottoms large enough to cover the surface heating unit.
This appliance is equipped with one or more surface
units of different size. Proper relationship of cookware to
heating element or burner will also improve efficiency.
Cookware not approved for use with ceramic cooktops
may break with sudden temperature changes. Use only
pans that are appropriate for ceramic cooktops (only
certain types of glass, heatproof glass, ceramic,
earthenware, or other glazed utensils are suitable).
Always position handles of utensils inward so they do not
extend over adjacent work areas, burners, or the edge of
the cooktop. This reduces the risk of fires, spills and
burns.
WARNING
RISK OF INJURY
When cooking with a bain-marie, the cooktop and
cooking vessel may crack due to overheating. The
cooking vessel in the bain-marie must not come in direct
contact with the bottom of the pot filled with water. Use
only heat-resistant cookware.
Always keep the cooktop and bases of pots dry. Liquid
between the potbase and the cooktop may build up
steam pressure, causing the pot to jump suddenly and
causing injury.
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
6
A
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
This appliance must be properly installed and grounded
by a qualified technician. Connect only to properly
grounded outlet. Refer to Installation Instructions for
details.
This appliance is intended for normal family household
use only. It is not approved for outdoor use. See the
Warranty. Ifyou have any questions, contact the
manufacturer.
Do not store or use corrosive chemicals, vapors,
flammables or nonfood products on or near this
appliance. It is specifically designed for use when
heating or cooking food. The use of corrosive chemicals
in heating or cleaning will damage the appliance and
could result in injury.
Do not operate this appliance if it is not working properly,
or if it has been damaged. Contact an authorized
servicer.
Do not cook on a broken cooktop. Cleaning solutions
and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the
appliance, switch power off at the service panel and lock
the panel to prevent the power from being switched on
accidentally.
State of California Proposition 65
Warnings
WARNING
This product contains chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
7
Causes of damage
Scratches on glass ceramic surface: Cookware with
rough bottoms will scratch the glass ceramic surface.
Salt, sugar and sand: Salt, sugar or grains of sand will
scratch the glass ceramic surface. Never use the
cooktop as a working surface or for setting things
down.
o Overheated cookware: Avoid heating pots or pans
that are empty.
o Hot cookware: Never set down hot pans and pots on
the control panel or frame. This may cause damage.
Protecting the environment
Energy-saving advice
o Always place a fitting lid on cookware. Cooking with
an uncovered pan will increase energy consumption
considerably. Use a glass lid to provide visibility and
avoid having to lift the lid.
o Use cookware equipped with a solid, flat bottom.
Curved pan bases increase energy consumption.
o The diameter of the pan base must match the size of
the element. If not, energy may be wasted.
o Choose cookware of a size suited to the amount of
food you are going to cook. A large pan that is only
half full will use a lot of energy.
o Use a small amount of water when cooking. This
saves energy, and vegetables retain a larger
percentage of their vitamins and minerals.
o Select a lower power level.
o Hard and sharp objects: Hard or sharp objects falling
on the cooktop may damage it.
o Boiled-over food: Sugar and products containing
sugar may damage the cooktop. Immediately eliminate
spills of these products with a glass scraper.
o Foils and plastics: Aluminum foil and plastic will melt
on the hot cooking zones. Stove protective film isn't
suitable for your cooktop.
o Unsuitable cleaning agent: Shimmering metallic
discolorations on the glass ceramic surface result from
the use of inappropriate cleaning agents and abrasion
from cookware.
Getting familiar with the appliance
In this section we describe the control panel, elements
and displays.
Control panel
8ci©los
8©1 IO8 o
C= U.U. rain el Io _} cr_'3 P'og...... 'st.'_,' ,_:,_, *_) rain low reed max
©,,/off e,_,,Lo_ ,_,,_, 0 1 o 2 o 3 o 4 o 5 o 6 o 7 o 8 o -
d,,_eLo_k
Display icons
¢
C_
0
88
OlOlO
Ol IO
z
8.8
©
@
0
rain
low
med
max
Clean Lock on
Child Lock on
Kitchen timer on
Timer value
Timer function
Cook time active for lit element
AutoChefTM: Heating up in progress
Power level i-_
Ready La'_
Residual heat H/i-,
AutoChefTM/PowerStart TM function R
Keep Warm function L
Dual element
Triple element
Bridge element
Frying levels for AutoChef TM
I
¢88¢
These instructions apply to more than one cooktop, your
appliance might vary slightly.
Page 2 contains a list of models and dimensions.
Touch keys
On/Off Main power switch
Clean Lock/ Cleaning protection / Child safety
Child Lock
Timer Time programming functions
o
PowerStart PowerStart TM function
AutoChef AutoChef TM function
Programs AutoChef TM programs
KeepWarm Keep Warm function
(_) Additional heating elements
O Select cooking element
0 - 9 Setting temperature level / Frying level /
Touch control zone
When you touch a symbol, the corresponding function
will be activated.
NOTICE: Always keep the touch control zones clean
and dry. Moisture and dirt can affect proper functioning.
Bridge element
Timer / Frying program
Heating elements
Element
O Single element
(_) Dual element
@ Triple element
(NETP666SUC only)
Bridge element
o
(NETP666SUC only)
Turning on and off
Always use cookware of a suitable size.
The size of these elements can be matched to your pan size. The heating element must
be turned on.
Turning off the outer heating ring: Touch (_). The _) display will turn off.
Adding: Touch (_) again. The (_) display will turn on.
On this element you can turn the medium and large heating rings off. The heating
element must be turned on.
Turning off the outer heating ring: Touch (_). The @ display will turn off.
Turning off the middle heating ring: Touch (_) again. The (_) display will turn off.
When you turn the heating element on again, all of the heating rings will be on.
The Bridge element combines two individual heating elements into one long griddle zone.
This configuration is ideal for griddles and large pans.
Note: : Do not use cookware larger than 17" x 10" (432 x 254 mm).
Turning on the Bridge element: Touch one of the two O touch keys for selecting the
heating element, then touch the _ key. The _ symbol will appear; both heating elements
are now selected, a-_
desired heat setting (1-9). The Bridge element and both individual heating elements are
now on.
Changing the heat setting: Touch one of the two O touch keys for
selecting the Bridge element, and set the new heat level within the next 10 seconds.
Turning off the Bridge element feature: Touch one of the two O touch keys for selecting
the Bridge element, and select 0 from the number keys. nLaappears in both displays. The
heating elements will turn off and the residual heat indicator will appear.
Laappears in both displays. Within the next 10 seconds select the
Residual heat indicator
The cooktop is equipped with a residual heat indicator
for each element. It shows you which elements are still
hot. Avoid touching the indicated elements.
If an H is shown on the display, the element is still hot.
You could use it, for example, to keep a small quantity of
Operation
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key until the indicator above the
main switch and the symbols O for the heating elements
turn on.
Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out.
The cooktop is switched off. The residual heat indicators
will remain on until the elements have cooled off
sufficiently.
Note: The cooktop switches off automatically when all
the elements have been switched off for more than
10 seconds.
If residual heat is still present when the cooktop is turned
on, H/i'_ will appear in the heating element display.
food warm or to melt a chocolate coating. As the element
continues to cool, the display changes to i-_.The display
goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on
after a power failure. The display lights up for
approximately 30 minutes.
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key until the indicator above the
main switch and the symbols 0 for the heating elements
turn on.
Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out.
The cooktop is switched off. The residual heat indicators
will remain on until the elements have cooled off
sufficiently.
Note: The cooktop switches off automatically when all
the elements have been switched off for more than
15 seconds.
If residual heat is still present when the cooktop is turned
on, H/i_ will appear in the heating element display.
10
Setting the cooktop
This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the number keys
1 to9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is
indicated by. and is set with the o keys in the touch
control zone.
Selecting the heat level
The cooktop must be turned on.
1. Touch the O touch key for the corresponding element.
The n
Laindicator will appear in the element display and
the O symbol for the selected element will light up
brightly.
2. Within the next 10 seconds touch the desired heat
setting (1-9) in the touch control zone.
.......
i
Auto Start Warm (_)0 Chef_rog..... _ _
_} Auto Powo_ K_pChef Pro0rams Start Warm (0}
"' o 3 o 4 '_T _
Changing the heat level
Select the element and touch the number key for the
desired heat level. To select an intermediate level, touch
the o symbol located between the heat level numbers.
Turning off the element
Select the element and set the heat level to 0. The
element is turned off and the residual heat indicator is
displayed.
Note: The heat is turned on and off to regulate the
temperature of the element; this means that the red glow
below the element is not always visible. When you select
a low heat setting, the element turns off for longer
intervals, while at a higher setting these intervals are very
short. Even at the highest level, the element turns on and
off.
Settings table
The following table provides some examples. Cooking
times may vary depending on the type of food, its weight
and quality. Deviations are therefore possible.
Set the element to heat setting 9 for bringing to the boil
or initial frying, then switch back to appropriate setting
(not for melting).
Melting
chocolate
butter
Heating
frozen vegetables (e.g. spinach)
broth
thick soup
milk**
Simmering
delicate sauce e.g. Bechamel sauce
spaghetti sauce
pot roast
fish*
Cooking
rice (with double amount of water)
potatoes boiled in their skins with 1-2 cups of water
boiled potatoes with 1-2 cups of water
• , CAUTION
During cooking, stews or liquid meals such as
soups, sauces or drinks can heat up too quickly
unnoticed and overflow or spatter. For this reason
we recommend that you stir continuously, gradually
heating the food at a suitable power level.
Power levels
1-2
1-2
. - 3.
7-8
1.-2.
1-2
4-5
2-3
4-5
4-5
2-3
4-5
4-5
11
Power
fresh vegetables with 1-2 cups of water 2. - 3.
frozen vegetables with 1-2 cups of water 3. - 4.
pasta (2-4 qt. water)* 6 - 7
pudding** 1 - 2
cereals 2 - 3
Frying
pork chop*** 5. - 6.
chicken breast*** 5 - 6
bacon 6 - 7
eggs 5 - 6
fish 5 - 6
pancakes 5. - 6.
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 Ib per serving) 8 - 9
other e.g. doughnuts (0.5 Ib per serving) 4. - 5.
* ongoing cooking without lid
** without lid
*** turn several times
levels
PowerStart TM feature
All heating elements are equipped with PowerStart TM
circuits. This feature heats up the element using the
highest power and then switches back to the continuous
cooking setting that you have selected.
How long it will take the element to heat up will depend
on the continuous cooking setting that you have
selected.
Cooking table for the PowerStart TM feature
Refer to the following table to see the foods for which
PowerStart TM is suitable. The smaller amount refers to the
smaller heating elements, the larger amount refers to the
Foods for which PowerStart TM is appropriate
Heating
frozen vegetables like spinach
broth
thick soups
milk*
Simmering
pot roast
fish**
Boiling
rice (with double amount of water)
potatoes boiled in their skins with 1-2 cups of water
boiled peeled potatoes with 1-2 cups of water
fresh vegetables with 1-2 cups of water
Setting the PowerStart TM feature
The PowerStart TM feature can only be activated in the first
30 seconds after the cooktop has been turned on:
1. Select the continuous cooking setting you want to use
for the element.
2. Touch PowerStart. R and the cooking level alternately
appear on the display. PowerStart TM is activated.
Once the food has been cooked briefly, the heating
element automatically switches back to the programmed
cooking level. The R indicator disappears and the
cooking level stays on constantly.
Note: After the PowerStart TM feature has been turned on,
the continuous cooking setting can still be changed for a
period of 10 seconds.
larger heating elements. The values stated in the table
are guideline values.
Quantity Heat setting
10 oz- 16 oz 2.- 3.PS
2-4 cups 7 - 8 PS
2-4 cups 1.- 2. PS
1-2cups 1-2PS
2 lb. 4-5PS
1 Ib.-1.51b. 4-5PS
3/4 cup - 2 cups 2 - 3 PS
5 - 14 medium potatoes 4 - 5 PS
5 - 14 medium potatoes 4 - 5 PS
1 lb. - 2 lb. 2.- 3. PS
12
Foods for which PowerStart TM is appropriate
Frying
pork chop
pancakes
* without lid
** ongoing cooking without lid
Tips for using PowerStart TM
Quantity Heat setting
1 - 2 servings 5. - 6. PS
5.-6. PS
The PowerStart TM feature does not
bring foods to a boil
Milk and foods that produce a lot of Use a tall pot.
froth will boil over
Milk will stick Rinse the pan with cold water before filling it.
When frying, the food may stick to Preheat the frying pan and oil before adding food. Do not turn the food too
the pan soon. Food will separate from the bottom of the pan after cooking a short time.
AutoChef TM
When you are using AutoChef TM to operate the heating
element, a sensor controls the temperature of the pan.
Advantages when frying
The cooking element only heats when it is necessary.
This saves energy. Oil and grease do not overheat.
CAUTION
o Never leave oil or fat cooking unattended.
o Place the pan in the centre of the element. Make
sure that the base of the pan has the proper
diameter.
o Do not cover the pan with a lid. The automatic
regulation will not work. A mash splatter guard
can be used without affecting the automatic
regulation.
o Only use fat or oil that is suitable for frying. When
you are using butter, margarine, olive oil or pork
lard, select the min temperature setting.
o AutoChef TM is not suitable for boiling.
It is designed to conserve the food's nutritional value while using little water for
cooking. Add only about 2 cups of water to the food for the large elements and
about 3/4- 1 cup of water for the small elements.
Cook rice in double the quantity of liquid.
The PowerStart TM feature is not suited for foods that are cooked in a large
quantity of water (e.g pasta).
System pans for AutoChef TM
For frying with AutoChef TM use the system pan only.
Otherwise, the controller will not work properly and may
cause your pans to overheat.
You can use the enclosed order form to request a free
system pan.
You can also purchase the system pan in specialised
stores:
HEZ390230 (e 10"/22 cm)
HEZ390220 (e 7.5"/19 cm)
The frying levels provided below are designed for our
system pans.
Frying levels
Power level
max
med
low
min
Temperature Suitable for
high Steaks medium rare, fried boiled potatoes
medium - high Veal cutlet, ground meat, thin slices of meat, vegetables
low- medium Thick pan-fried foods such as pork chop, hamburger, pancakes
low Chicken breast, omelettes, french toast, hash browns, fried food in butter or
olive oil
13
Setting the AutoChef TM feature
Select the appropriate frying level from the chart. Place
the system pan in the center of the element. The cooktop
must be on.
Depending on the appliance model the AutoChef TM
feature is fitted in the center element or the left front
element. Check your cooktop elements for the printing
auto chef.
Notes
o If AutoChef TM is fitted on a two-circle cooking zone, the
feature can only be used on the entire cooking zone.
o If AutoChef TM is fitted on the three circle cooking zone
of your cooktop, the outer heating ring is not available
while using this feature.
o If only the inner section of the cooking zone is
activated, the additional ring will automatically be
turned on once you select the AutoChef TM feature.
1. Select the cooking zone with the AutoChef TM feature.
2. Touch AutoChef. The R lights up on the element
display. The frying level options appear on the display
menu.
3. Select the desired frying level using the number keys
on the display menu.
AutoChef TM is enabled.
The cooking zone turns on automatically. The
temperature symbol - appears until the frying
temperature is reached. Then a beep sounds. The
temperature symbol disappears.
oER
>1©1J
"-_ chef programs_ _
Auto ;tar1 _w,m t) min low med max
2 o 3 4 o 5 o 6 7 8 9
4. Add the frying oil to the pan, then add the ingredients.
Turn the food over as usual to avoid burning.
Turning off AutoChef TM
Select 0 from the number keys. The cooking zone will
turn off and the residual heat indicator will appear.
I
m
AutoChef TM Frying Chart
The following chart lists which frying level is ideal for
particular foods. Frying time may depend on the type,
weight and quality of the food product.
Meat Pork chop, boneless or bone-in (1" thick)
Veal cutlet in breadcrumb (5/8" thick)
Fillet (1" thick)
Cordon bleu
Beef steaks medium rare (3/4" thick)
Beef steaks medium or well done (3/4"thick)
Chicken breast (1" thick)
Skillet-fried chicken
Sausages e.g. hot dogs (e 1/2- 11/8")
Hamburger
Thin slices of meat
Ground meat
Bacon
Fish Fish, fried (whole)
Fish fillet with or without breadcrumbs
Shrimps
* Place in cold pan
cf continuous frying
The frying levels provided are designed for the system
pan. Frying levels may vary when using other frying pans.
Frying level Total frying time
from signal
low 10-17 min
med 6-10 min
med 6-10 min
low 15-20 min
max 8-10 min
med 8-12 min
min 20-30 min
min 25-35 min
low 8-20 min
low 6-12 min
med 7-12 min
med 6-10 min
min 5-8 min
low 15-25 min
Iow/med 10-20 min
med 4-8 min
14
Frying level
Egg dishes Pancakes low
Omelettes min
Fried eggs min
Scrambled eggs min
French toast min
Potatoes Fried boiled potatoes max
Fried raw potatoes low
Hash browns min
Vegetables Garlic/Onions min
Squash, Egg plant low
Mushrooms med
Stir-fried vegetables med
Frozen Chicken nuggets, Chicken patties med
products
Cordon bleu min
Chicken breast low
Fish fillet in breadcrumbs low
Fish sticks med
Oven French fries max
Stir-fried vegetables min
Spring rolls/Eggrolls (3/4-11/4"thick) low
Ready-made Potato products e.g. fried potatoes low
meals Potato products e.g. hash browns min
Pasta (with added water) min
Misc. Baked camembert/Baked cheese low
Roast almonds, nuts, pine kernel* min
* Place in cold pan
cf continuous frying
Total frying time
from signal
cf
cf
2-6 min
2-4 min
cf
6-12 min
15-25 min
20-30 min
2-10 min
4-12 min
10-15 min
10-12 min
8-15 min
10-30 min
10-30 min
10-20 min
8-12 min
4-6 min
8-15 min
10-30 min
10-15 min
10-20 min
4-6 min
7-10 min.
3-7 min.
Frying programs
Use the frying programs with a system pan only.
You can use the frying programs to prepare the following
dishes:
Program Dish
P i Ground meat
P2 Hamburger, Pork chop
P3 Steak medium rare
P9 Steak medium or well done
PS Fish
P_ Pancakes, French Toast
P-7 Frozen oven French fries
P8 Stir-fried vegetables
P_ Omelette, eggs
Select the desired program
1. Select the cooking zone with the AutoChef TM feature.
2. Touch Programs. The nncu indicator lights up on the
element display.
3. Select the desired frying program using the number
keys.
The frying program is activated.
p z appears until the frying temperature is reached. A
beep sounds. The temperature symbol _- disappears
and the program number is displayed again.
Chef programs Start Warm (O) Chef Start Warm (0)
"TT-- 4 o 5-'
4. Add the frying oil and then the food to the pan. Turn
the food as usual to avoid burning.
Turning off the frying program
Select 0 from the number keys. the heating element will
turn off and the residual heat indicator will appear.
15
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
@
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
@
This function should not be used for long periods
of time, especially at high heat settings.
@
Make sure the cooktop is turned off with the main
power switch after each use.
Cancelling cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and -._ indicators light up. Then select
0 from the number keys until nn
uu is displayed.
Timer function with AutoChef TM
When you cook using AutoCheff M,the programmed cook
time begins to count down once the selected element
reaches the set temperature.
Notes
@
You can set a cook time of up to 99 minutes.
@
To program a cook time of less than 10 minutes,
always select 0 first before you select the required
value.
@After a power outage, the timer function will be
cancelled.
Setting the cook time
1. Select the desired element and power level.
2. Touch the Timer key twice. The indicator for the
desired element lights up. -._ and min appear, and ,._,_a"_"_
lights up on the Timer display.
o,,/ofr c_,,Loc_ _. 0 1 o 2 o 3 o 4 o 5 "-
ChildLock ,me,
3. Within the next 10 seconds, set the required time
using the number keys.
9.0
Chef P_ograms Sta_
= o---z__ ,-:--i
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the O indicator
of the required element lights up. Adjust the cook time
with touch keys 1 to 9 or deactivate with 0.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1. Touch the Timer key. nn
The __, min and L_ indicators light up.
2. Set the required time using the number keys 0 to 9.
After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
,._,._aappears in the timer display.
The timer begins to count down.
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator nLaappears in
the element display, nn
LaLalights up for 10 seconds on the
Timer display. The indicators disappear and the beep
stops.
Changing cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
16
Once the time has elapsed
At the end of the programmed time, a beep will sound
and mm
u,.., will appear on the timer display. The L_ indicator
is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and L_ indicators light up.
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and L_ indicators light up.
Touch the 0 key until UU appears on the timer display.
The L_ indicator goes out.
Keep warm function
The Keep Warm function is useful for melting chocolate
or butter and for keeping foods warm.
NOTICE: Never set any plastic dishes or containers on
the Keep Warm surfaces, they will melt.
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Turning on the Keep Warm function
1. Touch the O symbol for the desired heating element.
2. Touch the Keep Warm key. L will appear in the
display. The Keep Warm function is now turned on.
Turning off the Keep Warm function
Select the heating element and select 0 from the number
keys. '_
Lawill appear in the display. The heating element
will turn off.
Note: While the Keep Warm function is turned on, the
PowerStart TM feature cannot be activated.
I
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock for 4 seconds. The o=
indicator lights up for 4 seconds. The cooktop is now
locked.
Turning the child lock off
Touch Clean Lock/Child Lock for 4 seconds. The safety
panel lock is now canceled.
Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The _ indicator
appears. The control panel is locked for approximately
35 seconds. You can now clean the surface of the
control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
You can turn off the cooktop at any time.
Automatic Shutoff
The appliance features an automatic shutoff function.
Automatic shutoff is activated when the settings have not
been changed over an extended period of time. The time
when automatic shutoff is activated is based on the
temperature selected.
Shutoff Activated
I--8 appears in the display. Operation is interrupted.
Touch any key to make the display indicator disappear.
You can now adjust the settings.
• , CAUTION
The child lock may be accidentally turned on and off
due to:
o water spilled during cleaning
o food that has overflowed
o objects being placed on the Clean Lock/Child
Lock touch key.
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
c i Automatic child lock
LaOff*
i On
c2 Sound signals
L'7Confirmation beep and error signal off
i Only error signal on
2 All signals on*
*factory settings
17
Display
c_
r
co
"3
C I
c_
Cu
*factory settings
Function
Automatic timer
LaOff*
I-_ Automatic shut-off time
Duration of timer end signal
I 10 seconds*
2 30 seconds
3 1 minute
Activation of additional heating elements
L'7off
iOn*.
2Last setting before turning off the heating element
Selection time for cooking zone
La Unlimited*: You can adjust the settings of the last cooking zone used at any time without having to
select it again.
I Restricted: You can adjust the settings for the last cooking zone used within 10 seconds after select-
ing it. After that you will have to reselect the cooking zone before setting it.
Reset to basic settings
LaOff*
I Reset the appliance to basic settings
Changing the basic settings
The cooktop should be turned off.
1. Turn on the cooktop with the main switch.
2. Within the next 10 seconds, touch the Timer key for
4 seconds.
c I appears in the timer display. _'_Laappears on the
display of the front left element.
3. Touch the Timer key until the number of the desired
basic setting appears in the timer display.
4. Select the required setting using the number keys. For
basic settings with a double digit input (cS) the value
is distributed to the left and right front element display.
Ol
C_= -
l,.JI
,_-'3
c ean Lock/
Or_loff CMIdLock Tlmer
S. Touch the Timer key again for 4 seconds. The setting
is activated.
Leaving the basic settings
Turn off the cooktop with the main switch.
18
Cleaning and Maintenance
Daily Cleaning
Note: Recommended cleaners indicate a type of cleaner
and do not constitute an endorsement of a specific
brand.
Glass ceramic cooktop
CAUTION
Do not use any kind of cleaner on the glass while
the surface is hot, use only the razor blade scraper.
The resulting fumes can be hazardous to your
health. Heating the cleaner can chemically attack
and damage the surface.
Clean the surface when it is completely cool with the
following exception: remove dry sugar, sugar syrup,
tomato products and milk immediately with the razor
blade scraper (see special care chart).
Wipe off spatters with a clean, damp sponge or a paper
towel. Rinse and dry. Use white vinegar if smudge
remains; rinse.
Apply a small amount of the glass ceramic cooktop
cleaner. When dry, buff surface with a clean paper towel
or cloth.
Stainless steel side trim
Wipe with the grain when cleaning. For moderate/heavy
soil, use BonAmi® or Soft Scrub® (no bleach).
Wipe using a damp sponge or cloth, rinse and dry.
Cleaning guidelines
When using a cleaner, use only a small amount; apply to
a clean paper towel or cloth. Wipe on the surface and
buff with a clean dry towel.
For best results, use cleaners such as glass ceramic
cooktop cleaner, BonAmi®, Soft Scrub® (without
bleach), and white vinegar.
Avoid these cleaners
o Glass cleaners which contain ammonia or chlorine
bleach. These ingredients may damage or
permanently stain the cooktop.
o Caustic cleaners - cleaners such as Easy Off® may
stain the cooktop surface.
Abrasive cleaners.@
@
Metal scouring pads and scrub sponges such as
Scotch Brite® can scratch and/or leave metal marks.
Soap-filled scouring pads such as SOS® can scratch
the surface.
@ Powdery cleaners containing chlorine bleach can
permanently stain the cooktop.
@ Flammable cleaners such as lighter fluid or WD-40.
Cleaning charts
Type of Soil
Dry sugar, sugar syrup, milk or tomato spills. Melted
plastic film or foil. All these items REQUIRE IMMEDIATE
REMOVAL. Failure to remove these immediatly can per-
manently damage the surface.
Burned-on food soil, dark streaks, and specks
Greasy spatters
Possible Solution
Remove these types of spills while the surface is hot
using the razor blade scraper. Use a new, sharp razor in
the scraper. Remove pan and turn off the element. Wear-
ing an oven mitt, hold scraper at 30 ° angle, using care
not to gouge or scratch the glass. Push soil off the
heated area. After the surface has cooled, remove the
residue and apply the glass ceramic cooktop cleaner.
WARNING
RISK OF INJURY
The blade is extremely sharp. Risk of cuts. Protect
the blade when not in use. Replace the blade imme-
diately when any imperfections are found. Follow
manufacturer's instructions.
Soften by laying a damp paper towel or sponge on top of
soil for 30 minutes. Use a plastic scrubber and glass
ceramic cooktop cleaner or use the razor blade scraper.
Rinse and dry.
Use a soapy sponge or cloth to remove grease; rinse
thoroughly and dry. Apply glass ceramic cooktop
cleaner.
19
Type of Soil Possible Solution
Metal marks: Iridescent stain
Hard water spots:
Hot cooking liquids dripped on surface
Surface scratches:
Small scratches are common and do not affect cooking.
They become smoother and less noticeable with daily use
of the glass ceramic cooktop cleaner.
Pans with aluminum, copper or stainless steel bases may
leave marks. Treat immediately after surface has cooled
with glass ceramic cooktop cleaner. If this does not
remove the marks, try a mild abrasive (Bon Ami@, Soft
Scrub@ without bleach) with a damp paper towel. Rinse
and reapply glass ceramic cooktop cleaner. Failure to
remove metal marks before the next heating makes
removal very difficult.
Minerals in some water can be transferred onto the sur-
face and cause stains. Use undiluted white vinegar, rinse
and dry. Recondition with glass ceramic cooktop cleaner.
Remove boilovers and stains before using the cooktop
again.
Apply glass ceramic cooktop cleaner before using to
remove sand-like grains and grit such as salt and sea-
soning. Scratches can be reduced by using pans with
bases that are smooth, clean, and dry before use. Use
recommended glass ceramic cooktop cleaner daily.
NOTICE: Diamond rings may scratch the surface.
Maintenance
This appliance requires no maintenance other than daily
cleaning. For best results, apply cooktop cleaning cream
daily.
Service
Troubleshooting
If you encounter a problem, it often will merely be
something minor. Before you call customer service,
consider the suggestions and instructions below:
Fault Possible cause
Cooktop is not working The electric power supply has been
interrupted.
The appliance has not been cor- Make sure that the appliance has been connected cor-
rectly connected following the con- rectly.
nection diagram.
Electronic system malfunction. Contact the Technical Assistance Service.
E is flashing on the ele- The touch control zone is wet, very Clean the touch control zone, or remove the object.
ment display dirty, food has boiled over, or an Lightly touch the corresponding touch key. The flash-
object is lying on top of the touch ing should stop.
control zone.
E flashes on all ele- The main switch has been activated Press the power key again. Reset the cooktop.
ment displays. An continuously for more than 5 sec-
accoustic signal onds.
sounds
The cooktop turns off The main switch has been touched Press the main switch again. Reset the cooktop.
by itself unintentionally.
• , CAUTION
Repairs should only be done by a trained servicer.
Improper repair of your appliance may result in risk
of severe physical injury or death.
Measure
Use other electrical appliances to check if there has
been a power outage. Check to see if there is a prob-
lem with the circuit breaker for the electrical installa-
tion.
20
DisplayE and numbers A fault in the electronic system has
occurred.
Display F and numbers A fault has been detected.
Error messages
Turn the appliance off and back on at the fuse or cir-
cuit breaker, tf the same fault occurs again, disconnect
the appliance and call Technical Assistance Service.
The following table of error messages lists actions you
can take to correct the problem
Display Fault
c The element is too hot and has
turned off.
I--II
F-7
//_/7
o
Notes
o The cooktop regulates the heating element
temperature by turning the heat source on and off; this
means that the reddish glow of the heat source
beneath the heating element may not always be
visible. If you select a low heat setting, the heat source
is frequently off; at higher settings it is seldom off. The
source turns on and off even at the highest settings.
o You may hear a quiet hum when the heating elements
are in the heating phase. The heating elements may
glow with different levels of brightness. Depending on
the angle from which you are looking at the heating
element, this glow may be visible over the marked
edge of the heating element. These are technical
characteristics. They have no effect on quality and
function.
o Glass ceramic may have uneven areas on the surface
due to the nature of the material itself. Because of the
mirror-like finish on the cooking surface, even
extremely small bubbles less than 1 mm in diameter
may be visible. These bubbles will not have any
adverse effect on the operation of the cooktop nor on
the durability of the glass ceramic cooking surface.
o Depending on the countertop that is present in the
kitchen, an uneven gap between the cooktop unit and
the countertop can occur. For this reason, a flexible
seal is provided around the entire cooktop unit.
The touch control zone is too hot.
AutoChef TM is defective.
The element was in continuous use
for too long.
Measure
Remove the pans from the elements, a--_
when you press the display, if the element has cooled
down sufficiently. Wait a few minutes until the element
has cooled down a bit. If a-"_
element is turned back on, the cooktop is still too hot.
Turn off the elements and allow them to cool further.
Make sure that cookware is properly positioned on the
element, and no hot objects are in contact with the
touch control zone. Wait a few minutes until the touch
control zone has cooled down. If i--_' appears after you
turn on the appliance, call Technical Assistance Ser-
vice.
Confirm and close the error message by touching any
area on the touch control zone. You can cook without
AutoChef TM. Contact Technical Assistance Service.
The automatic time limitation has been activated.
Touch any key. You can now turn on the heating ele-
ment immediately.
_-c appears again after the
rc disappears
Technical service
Contact our Technical Service Department if your
appliance needs repair. Our central Customer Service
Center (see below) will also be happy to supply you with
details on a center close to you.
E number and FD number:
When you contact our service, please have the Model(E)
number and the FD number for your appliance available.
You can find the identification plate with these numbers
on the underside of the appliance and in the appliance
booklet.
Questions? Please contact us. We look forward to
hearing from you!
800-944-2904
www.bosch-home.com
1901 Main Street, Suite 600
Irvine, CA 92614
21
Loading...