Bosch NDN-265-PIO User Manual
IP Camera 200 Series
NDN-265-PIO
en Installation Manual
IP Camera 200 Series Table of Contents | en 3
Table of Contents
1Safety 5
1.1 Safety precautions 5
1.2 Important safety instructions 6
1.3 FCC & ICES compliance 7
1.4 UL certification 8
1.5 Bosch notices 8
1.6 Copyrights 9
2 Introduction 10
2.1 Features 10
2.2 Unpacking 11
3 Installation 12
3.1 Disassembly 12
3.2 MicroSDHC card 13
3.3 Network (and power) connector 14
3.4 Power connection 15
3.4.1 DC power connection 15
3.5 I/O connector 16
3.6 Audio connectors 17
3.7 Mounting 18
3.8 Camera set-up 19
3.8.1 Camera positioning 20
3.8.2 Focal length and focus 22
3.9 Resetting the camera 23
4 Browser connection 24
4.1 System requirements 24
4.2 Establishing the connection 25
4.2.1 Password protection in camera 25
4.3 Protected network 25
5 Troubleshooting 26
5.1 Resolving problems 26
5.2 Customer service 26
Bosch Security Systems Installation Manual AM18-Q0616 | v1 | 2012.02
4 en | Table of Contents IP Camera 200 Series
6 Maintenance 27
6.1 Repairs 27
6.1.1 Transfer and disposal 27
7 Technical Data 28
7.1 Specifications 28
7.1.1 Accessories 30
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
IP Camera 200 Series Safety | en 5
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the device.
Bosch Security Systems Installation Manual AM18-Q0616 | v1 | 2012.02
6 en | Safety IP Camera 200 Series
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
IP Camera 200 Series Safety | en 7
1.3 FCC & ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired operation.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
Bosch Security Systems Installation Manual AM18-Q0616 | v1 | 2012.02
8 en | Safety IP Camera 200 Series
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
1.4 UL certification
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
1.5 Bosch notices
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that
electronic and electrical appliances, which have reached the
end of their working life, must be collected and disposed of
separately from household waste material. Separate collecting
systems are usually in place for disused electronic and
electrical products. Please dispose of these devices at an
environmentally compatible recycling facility, per European
Directive 2002/96/EC
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
IP Camera 200 Series Safety | en 9
1.6 Copyrights
The firmware 4.1 uses the fonts "Adobe-Helvetica-Bold-RNormal--24-240-75-75-P-138-ISO10646-1" and "AdobeHelvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under
the following copyright:
Copyright 1984-1989, 1994 Adobe Systems Incorporated.
Copyright 1988, 1994 Digital Equipment Corporation.
Permission to use, copy, modify, distribute and sell this
software and its documentation for any purpose and without
fee is hereby granted, provided that the above copyright
notices appear in all copies and that both those copyright
notices and this permission notice appear in supporting
documentation, and that the names of Adobe Systems and
Digital Equipment Corporation not be used in advertising or
publicity pertaining to distribution of the software without
specific, written prior permission.
This software is based in part on the work of the Independent
JPEG Group.
Bosch Security Systems Installation Manual AM18-Q0616 | v1 | 2012.02
10 en | Introduction IP Camera 200 Series
2 Introduction
2.1 Features
The Bosch NDN-265-PIO 720p is a ready-to-use, complete
network surveillance infrared IP camera system inside a robust
dome. This camera offers a cost effective solution for a broad
range of applications. The robust aluminum camera body is
IP66 rated, offering water and dust proofing for demanding
environments. The built-in active infrared illuminator ensures
effective vision under extreme low-light conditions.
H.264 compression technology provides clear images reducing
bandwidth and storage. The camera can be used as a standalone video surveillance system with no additional equipment
or it can easily integrate with the Bosch DVR 700 Series
recorders.
Features include:
– MicroSD/SDHC card slot supports edge recording up to 32GB
– Tri-streaming: Two H.264 streams and one M-JPEG stream
– Vandal-resistant and IP66-rated robust design
– Two-way audio and audio alarm
– Power over Ethernet (IEEE 802.3af compliant)
– Tamper and motion detection
– Conforms to the ONVIF standard for wide compatibility
– High performance active infrared illuminator inside the
camera for extreme low-light environments
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
Loading...