Video | MIC Series Composite Cables
MIC Series Composite Cables
www.boschsecurity.com
u High-quality, sun-resistant jacket
u Multiple cable lengths
u Factory-prepared ends
MIC Series composite cables provide all power, video,
and telemetry connections between a MIC Series
camera and a MIC Series power supply unit in a single
shielded cable.
These high-quality cables are specifically designed to
maximize flexibility while maintaining properties such
as strength and elongation. Each cable is fitted at one
end with an IP67-sleeved female connecter which
connects to, and shields, the male connecter in the
base of the camera. This provides a reliable, easy-toinstall, common connection for all MIC Series cameras.
The other end of the cable has individual /free (nonterminated) wires for quick installation into terminals
in the MIC power supply unit, for connection to the
relevant control equipment and power source.
The cable shield connects to a metal cable gland to
ensure minimum EMC interference. The outer jacket of
the cable is UV-resistant. For maximum protection,
Bosch recommends that the cable be contained in
permanently earthed metal conduit.
Technical specifications
12-pin cable (for all MIC cameras except current
thermal cameras)
Cable Lengths * 2 m (6.56 ft)
Cable diameter 8 mm (0.30 in.)
Cable weight 2m: 0.3kg (0.66 lb)
Video Cable
Impedance
Connecter diameter 25 mm (0.98 in.)
Connecter IP67, 12-pin female sleeved
Temperature range,
operational
Temperature range,
storage
Jacket material NHFR037
10 m (32.81 ft)
20 m (62.62 ft)
25 m (82.02 ft)
10m: 0.5kg (1.10 lb)
20m: 0.95kg (2.09 lb)
25m: 3.3kg (7.28 lb)
75 Ohm
-40 °C to +80 °C (-40 °F to +176 °F)
-55 °C to +85 °C (-67 °F to +185 °F)
2 | MIC Series Composite Cables
Environmental
regulations/standards
Compatibility MIC550 / MIC550IR
UL-recognized component AWM Style 21456
VW-1 rating (UL 1581 section 1080)
Sunlight resistance testing (UL 1581 section
1200)
MIC500
MIC440
MIC400
MIC412
14-pin cable (for current thermal cameras)
Cable Lengths * 2 m (6.56 ft)
Cable diameter 10 mm (±0.20 mm) [0.39 in. (±0.008 in.)]
Video Cable
Impedance
Connecter IP67, 14-pin female sleeved
Temperature range,
operational
Jacket material NHFR037
Environmental
regulations/standards
Compatibility MIC612
10 m (32.81 ft)
20 m (62.62 ft)
25 m (82.02 ft)
75 Ohm
-40 °C to +80 °C (-40 °F to +176 °F)
UL-recognized component AWM Style 21456
VW-1 rating (UL 1581 section 1080)
Sunlight resistance testing (UL 1581 section
1200)
* For distances greater than 25 m (82.02 ft) between
the MIC camera and the power supply, please refer to
the MIC PSU Extension document found on the
product page of your MIC camera, in the online catalog
at boschsecurity.com.
Cable Diagram
MIC Cable – 14-pin (for current MIC thermal cameras)
Ordering information
MIC Cable 2M
2 meter (6.56 ft) composite cable with plug for power,
data and video for MIC Series cameras
Order number MIC-CABLE-2M
MIC Cable 10M
10 meter (32.81 ft) composite cable with plug for
power, data and video for MIC Series cameras
Order number MIC-CABLE-10M
MIC Cable 20M
20 meter (62.62 ft) composite cable with plug for
power, data and video for MIC Series cameras
Order number MIC-CABLE-20M
MIC Cable 25M
25 meter (82.02 ft) composite cable with plug for
power, data and video for MIC Series cameras
Order number MIC-CABLE-25M
MIC Cable – 12-pin (for all MIC cameras except
current thermal cameras)
MIC Thermal Cable 2M
2 meter (6.56 ft) composite cable with plug for power,
data and video for MIC Series thermal cameras
Order number MIC-THERCBL-2M
MIC Thermal Cable 10M
10 meter (32.81 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras
Order number MIC-THERCBL-10M
MIC Thermal Cable 20M
20 meter (62.62 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras
Order number MIC-THERCBL-20M
MIC Thermal Cable 25M
25 meter (82.02 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras
Order number MIC-THERCBL-25M