Bosch MIC-IPIR-PS-24, MIC-IPIR-PS-115, MIC-IP-PS-24, MIC-IP-PS-230, MIC-IP-PS-115 Specsheet

Video | MIC Series IP Power Supply

MIC Series IP Power Supply

www.boschsecurity.com

u MIC power supply with IVA-enabled, integrated

Bosch IP technology provides video and control over
IP for MIC550, MIC550IR, and MIC612 cameras.

u Easy-to-install, IP67-rated enclosure has high

tolerance to vibration/shock for both indoor and
outdoor installations.

A full range of MIC Series power supply units (PSUs),
with integrated Bosch IP technology and built-in
support for NTCIP protocol, provides all connections
for power, telemetry and video for MIC Series MIC550,
MIC550IR, and MIC612 cameras. These MIC IP PSUs
ensure that the cameras can be installed in a variety of
locations, including low voltage and mobile
applications. They conform to the National
Transportation Communications for ITS Protocol
(NTCIP) specification. NTCIP conformance ensures
that the MIC IP PSU integrates with transportation
management devices.
Each power supply has UL, CE, and FCC approval, is
rated to IP67, supports 50/60 Hz, and comes in a
selection of input voltages. The PSU housing also has
slots for optional cards, such as the 8-channel alarm
card including washer pump drive (MIC-ALM).
The built-in encoder features DVD-like quality H.264
video, at up to 25/30 images per second, over IP
networks. It provides Dual Streaming (two

u Supports optional, user-installed Bosch Ethernet

fiber optic.

u NTCIP and ONVIF conformant encoder; integrates

with transportation management devices and
provides interoperability with other conformant
systems.

u Local storage on SD or SDHC card (32 GB

maximum) for flexible recording options

independently configurable video streams) and
bidirectional audio communication in parallel to video,
and supports Bosch VCA algorithms.

Functions

Intelligence

With built-in video content analysis, the MIC IP PSU
reinforces the Intelligence-at-the-Edge concept where
edge devices become increasingly intelligent. The MIC
IP PSU comes with built-in MOTION+ video motion
detection. This motion detection algorithm is based on
pixel change and includes object size filtering
capabilities and sophisticated tamper detection
capabilities.
Bosch offers more advanced video content analysis
(VCA) applications with its Intelligent Video Analysis
(IVA). An enabled option, it bases the IVA algorithm on
digital imaging technology that uses multi-level image
analysis of pixel, texture, and motion (trajectory)
changes.

(13 in.)

330 mm

(9.84 in.)

250 mm

(3.57 in.)

90.75 mm

2 | MIC Series IP Power Supply

Flexibility

The MIC IP PSU offers unparalleled recording
flexibility. Record on network-attached RAID iSCSI
storage devices or locally on a user-supplied SD or
SDHC card (32 GB maximum). The built-in iSCSI
support enables the MIC IP PSU to act as a
conventional DVR while streaming high-performance
live video across the network.

Dual Streaming and Dual H.264 Recording

The MIC IP PSU uses Dual Streaming to generate two
independent IP video streams per channel if sufficient
computational power is available. This allows viewing
and recording at two different quality levels to save
disk space and bandwidth. On alarm, they can send an
e‑mail with JPEG images attached. Video can be
recorded centrally on iSCSI drives managed by VRM
Video Recording Manager and redundantly on the local
media.

Recording Profiles

The MIC IP PSU features a highly flexible recording
scheduler, providing up to ten programmable
recording profiles and allowing individually assigned
camera profiles. With these profiles, you can
accelerate the frame rate as well as increase the
resolution on alarm, saving recording space during
non-alarm periods.

Access Security

The MIC IP PSU offers various security levels for
accessing the network, the unit, and the data
channels. As well as password protection with three
levels, it supports 802.1x authentication using a
RADIUS server for identification. You can secure Web
browser access by HTTPS using a SSL certificate that
is stored in the unit. For total data protection, each
communication channel—video, audio, or serial I/O—
can be independently AES encrypted with 128‑bit
keys, once the Encryption Site License has been
applied.

Viewing

View video on a PC using a Web browser, in the Bosch
Video Management System, or integrate it into another
video management system. By routing the IP video to a
high-performance VIP XD HD video decoder module,
you can present the video with ultimate clarity.

Bosch Video Client surveillance software

The bundled Bosch Video Client software, provided
free of charge, offers a user-friendly interface to
support easy installation, configuration, and operation
of up to 16 cameras. (A license upgrade, sold
separately, adds support for up to 64 cameras.) A
wizard allows the configuration of multiple cameras
simultaneously using an auto detection device.
Multiple cameras can be monitored in one screen and
video clips on the SD card can be archived and
searched in a single application.

ONVIF conformance

The MIC IP PSU conforms to the ONVIF (Open
Network Video Interface Forum) specification which
guarantees interoperability between network video
products regardless of manufacturer. ONVIF
conformant devices are able to exchange live video,
audio, metadata and control information. They are
automatically discovered and connected to network
applications such as video management systems.

Optional Fiber Optic Kit

Users can install the fiber optic media converter
module (sold separately) directly into the power
supply box to provide an integrated fiber optic
solution.

Easy Upgrade

Remotely upgrade the MIC IP PSU via IP whenever
new firmware becomes available. This ensures up-to­date products, thus protecting investment with little
effort.

Certifications and approvals

Electromagnetic
Compatibility (EMC)

Product Safety Complies with UL, CSA Standards, and CE

Ingress Protection
Rating

Other RoHS; ONVIF compliant (encoder)

Complies with FCC Part 15 and ICES-003
regulations, EN 50130-4 and EN
55022:2006 inc AL: 2007,
EN 61000-3-2:2006, EN
61000-3-3:1995,

regulations including IEC Standards and c­UL 60950-1 & 22 or latest versions.

IP67

Installation/configuration notes

Dimensional Drawing

1 Cable gland (1/2 in.) for composite cable (for analog connections)

2 Cable gland (M16) for RJ45 / Fiber cable

3 | MIC Series IP Power Supply

3 Blanking plug for optional cable gland (M12) for:

- alarms (for non-thermal cameras)

- switched video output (for thermal cameras)

4 Cable gland (M12) for optional washer drive

Technical specifications

Electrical

Model Voltage / Power @ 50/60 Hz Applicable

Cameras

Non-IR IP Power Supply Units

MIC-IP-PS-24 Input: 24 VAC ± 10%

Consumption: 2.0 A

MIC-IP-PS-115 Input: 115 VAC ± 10%

Consumption: 400 mA

MIC550,
MIC612

MIC-IP-PS-230 Input: 230 VAC ± 10%

Consumption: 200 mA

IR IP Power Supply Units

MIC-IPIR-PS-24 Input: 24 VAC ± 10%

Consumption: 3.3 A

MIC-IPIR-PS-115 Input: 115 VAC ± 10%

MIC550IR

Consumption: 750 mA

MIC-IPIR-PS-230 Input: 230 VAC± 10%

Consumption: 350 mA

Mechanical

Dimensions (L x W x H) 330 mm x 250 mm x 90.75 mm

(13 in. x 9.84 in. 3.57x in.)

Form Factor

11.19 mm (0.44 in.)

(four screw holes)

Weight Non-IR PSUs: 7.21 kg (15.9 lb)

IR PSUs: 7.3 kg (16.1 lb)

Material Powder-coated cast aluminum, rated IP67

Environmental

Operating
Temperature

• Non-IR models: -40 °C to +60 °C
(-40 °F to +140 °F)

• IR models: -40 °C to +50 °C
(-40 °F to +122 °F)

Storage Temperature -40 °C to +65 °C (-40 °F to +149 °F)

Cold Start -30 °C

(Requires 30-minute warm-up period after
applying power before operation.)

Software Control

Camera Setup/
Control

Software

Via Internet Explorer Web browser version 7.0 or
later or BVMS

Firmware upload

Update

Network

Storage One (1) SD card slot (for an SD or an SDHC

card, user-supplied) with card capacity up to
32 GB

Standards H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG

Streaming A total of four (4) independent streams:

• Two (2) individually configurable H.
264 streams at 4CIF/D1 resolution,

• One (1) H.264, I-frame only stream
(suitable for recording)

• One (1) M‑JPEG stream at 4CIF/D1
resolution

GOP Structure IP, IBP, IBBP

Data Rate 9.6 kbps to 6 Mbps

Overall IP Delay 240 ms

Resolution (Horizontal x Vertical, PAL/NTSC)

- 4CIF/D1 704 x 576/480 (50/60 ips)

Depending on picture content and movement

Color RAL 9010 (Pure White) with sand finish

Optional add-ons
(each sold separately)

MIC-ALM (8-input alarm card)
MIC-WKT (washer pump kit)
MIC-WKT-IR (washer pump kit with
integrated four-input alarm terminal for IR
models)
VG4‑SFPSCKT Fiber Optic Ethernet Media
Converter Kit

User Connections

Alarm Inputs/Outputs

IP Encoder Video Input
(all models)

Supports 1 video input

- Recommended in order to use
the switched video output for MIC
thermal cameras.

- Non-IR, without expansion card Supports 1 tamper input.

- Non-IR, with expansion card Supports 8 inputs, 2 outputs.

- IR models Supports 4 inputs.

- CIF 352 x 288/240 (50/60 ips4)

Ethernet 10-Base T/100 Base-TX, auto-sensing, half/

full duplex, RJ45

Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,

FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP v3, RTSP, 802.1x, iSCSI,
DynDNS, UPnP, IP v4/6, QoS, SSH, SSL

Encryption TLS 1.0, SSL, AES (license option)

NTCIP Protocols

- CCTV Camera

NTCIP 1205

Control

- Application Layer SNMP per NTCIP 1101:1996 & NTCIP 2301

- Transport/Network

TCP/IP per NTCIP 2202:2001

Layers

- Sub-network Layer PMPP (Point to Multi-Point Protocol) per
NTCIP 2101:2001 & NTCIP 2102:2003

4 | MIC Series IP Power Supply

Audio 1 x 3.5mm stereo socket

- Standard G.711, 8 kHz sampling rate

- Signal-to-Noise
Ratio

- Audio Streaming Full Duplex / Half Duplex

L16, 16 kHz sampling rate

>50 dB

Fiber Optic Kit

Description Fiber Optic Ethernet Media Converter kit (sold

Data Interface Ethernet

Data Rate 10/100 Mbps

Compatible
Receiver

separately and user-installed inside the power supply
enclosure)
See the datasheet for the VG4‑SFPSCKT Fiber Optic
Ethernet Media Converter Kit for technical
specifications and other product details.

IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port

CNFE2MC

Ordering information

MIC IP Power Supply 115 VAC

115 VAC, 50/60 Hz, IP-enabled power supply for MIC
Series cameras

Order number MIC-IP-PS-115

MIC IP Power Supply 230 VAC

230 VAC, 50/60 Hz, IP-enabled power supply for MIC
Series cameras

Order number MIC-IP-PS-230

MIC IP Power Supply 24 VAC

24 VAC, 50/60 Hz, IP-enabled power supply for MIC
Series cameras

Order number MIC-IP-PS-24

MIC IP IR Power Supply 115 VAC

115 VAC, 60 H, IP-enabled power supply for MIC
Series cameras with Infrared Illuminators

Order number MIC-IPIR-PS-115

MIC IP IR Power Supply 230 VAC

230 VAC, 50/60 Hz, IP-enabled power supply for MIC
Series cameras with Infrared Illuminators

Order number MIC-IPIR-PS-230

MIC IP IR Power Supply 24 VAC

24 VAC, 50/60 Hz, IP-enabled power supply for MIC
Series cameras with Infrared Illuminators

Order number MIC-IPIR-PS-24

Accessories

MIC Cable 2M

2 meter (6.56 ft) composite cable with plug for power,
data and video for MIC Series cameras

Order number MIC-CABLE-2M

MIC Cable 10M

10 meter (32.81 ft) composite cable with plug for
power, data and video for MIC Series cameras

Order number MIC-CABLE-10M

MIC Cable 20M

20 meter (62.62 ft) composite cable with plug for
power, data and video for MIC Series cameras

Order number MIC-CABLE-20M

MIC Cable 25M

25 meter (82.02 ft) composite cable with plug for
power, data and video for MIC Series cameras

Order number MIC-CABLE-25M

MIC Thermal Cable 2M

2 meter (6.56 ft) composite cable with plug for power,
data and video for MIC Series thermal cameras

Order number MIC-THERCBL-2M

MIC Thermal Cable 10M

10 meter (32.81 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-10M

MIC Thermal Cable 20M

20 meter (62.62 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-20M

MIC Thermal Cable 25M

25 meter (82.02 ft) composite cable with plug for
power, data and video for MIC Series thermal cameras

Order number MIC-THERCBL-25M

MIC-ALM Alarm and Washer Pump Drive Card

8 Input alarm and washer pump drive card for PSU
(Not for IR PSU)

Order number MIC-ALM

MIC-WKT Washer Kit

Washer kit for non infrared MIC models (includes
washer pump drive card, washer nozzle and mounting
brackets for wall and 4 in. PCD base)

Order number MIC-WKT

MIC-WKT-IR Washer Kit

Washer kit for infrared power supplies only (includes
washer nozzle and mounting brackets for wall or 4 in.
PCD base)

Order number MIC-WKT-IR

VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit

Ethernet media converter video transmitter/data
receiver fiber optic kit

Order number VG4-SFPSCKT

Software Options

MVC-FIVA4-ENC1

IVA 4.xx/5.xx VCA software license for single channel
encoder (e‑license)

Order number MVC-FIVA4-ENC1

5 | MIC Series IP Power Supply

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.us

Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[e-mail]
www.boschsecurity.com

Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.asia

Bosch (Shanghai) Security Systems Ltd.
201 Building, No. 333 Fuquan Road
North IBP
Changning District, Shanghai
200335 China
Phone [phone]
Fax: [phone]
www.boschsecurity.com.cn

Robert Bosch Ltda Security Systems Division
Via Anhanguera, Km 98
CEP 13065-900
Campinas, Sao Paulo, Brazil
Phone: [phone]
Fax: [phone]
[e-mail]
www.boschsecurity.com

© Bosch Security Systems 2014 | Data subject to change without notice
7987129483 | en, V6, 14. Feb 2014