Bosch LTC 8560-60 Specsheet
Video | LTC 8560 Series Single-channel On-site Receiver/Drivers
LTC 8560 Series Single-channel On-site
Receiver/Drivers
www.boschsecurity.com
u Pan/Tilt/Zoom (PTZ) control
u Bi-Phase or RS-232 data input
The LTC 8560 Series, the LTC 8562 Series, and the
LTC 8563/20 on-site receiver/drivers are control data
decoder units and motor drivers for pan/tilt units and
zoom lenses. These receiver/drivers are used in
conjunction with Allegiant Series or microprocessorbased switcher/controller systems.
Functions
The receiver/driver decodes Allegiant Bi-Phase control
data from the switcher/controller system through the
LTC 8568 Series Signal Distribution Unit into specific
control codes. In addition, the receiver/driver accepts
RS‑232 control code data generated by the LTC 8780
Data Converter Unit.
These receiver/drivers are available in a variety of
input and output voltage configurations. All units are
50/60 Hz line frequency compatible. All units have low
voltage DC lens drivers (6 V or 12 V, selectable) for
focus, zoom, and iris with adjustable speed. Auxiliary
supply terminals provide power which is fuseprotected at the voltage of the pan/tilt output.
Additional features include a full operating
temperature range, an integral local test function, a
unique dither feature, polarity reversible lens drive,
u Compatible with Allegiant Systems
u Variety of input/output voltages
u Integral local test feature
convenient thumbwheel selectable camera addressing,
and a NEMA-4X, IP66 rated environmental enclosure
with lockable latches.
Certifications and approvals
EMC Requirements CE Immunity, CE Emission Class B, FCC
Class B, ICES-003
Safety CE, UL, cUL
273.1
(10.75)
8.1
(0.32)
152.4
(6.00)
mm
in.
4Ø
2 | LTC 8560 Series Single-channel On-site Receiver/Drivers
Installation/configuration notes
Mounting Hole Pattern
Technical specifications
Electrical
Pan/Tilt Output Four (4) function pan/tilt solid
state drive with zero crossing
turn-on; 1.0 A drive capability
Ordering information
LTC 8560/50 Single-channel On-site Receiver/Driver
230 VAC pan/tilt voltage, 230 VAC power supply, no
auxiliary, 50°Hz
Order number LTC 8560/50
LTC 8560/60 Single-channel On-site Receiver/Driver
120 VAC pan/tilt voltage, 120°VAC power supply, no
auxiliary, 50/60 Hz
Order number LTC 8560/60
LTC 8562/50 Single-channel On-site Receiver/Driver
24 VAC pan/tilt voltage, 230 VAC power supply, no
auxiliary, 50 Hz
Order number LTC 8562/50
LTC 8562/60 Single-channel On-site Receiver/Driver
24 VAC pan/tilt voltage, 120 VAC power supply, no
auxiliary, 50/60 Hz
Order number LTC 8562/60
LTC 8563/20 Single-channel On-site Receiver/Driver
24 VAC pan/tilt voltage, 24 VAC power supply, no
auxiliary, 50/60°Hz
Order number LTC 8563/20
Lens Output
For Zoom, Focus , and Motorized
Iris
6 VDC or 12 VDC,
100 mA maximum
Variable Speed 6 VDC Setting 4 VDC to 8 VDC
Variable Speed 12 VDC Setting 8 VDC to 16 VDC
Mechanical
Size (W x D x H) 295 x 241 x 165 mm (11.6 x 9.5 x 6.5 in.)
Weight 6.8 kg (15 lb)
Environmental
Temperature
• Operating –40°C to 60°C
(–40°F to 140°F)
• Storage –40°C to 70°C
(–40°F to 158°F)
Humidity 0% to 95% relative, non-condensing
Vibration 3 g swept sine wave,
Shock 50 g, 11 ms, ½ sine
Enclosure Protection NEMA-4X, IP66
15 Hz to 2000 Hz
Loading...