Bosch ICP-VR8488 User Manual
ICP-VR8488
EN
User’s Guide
Intruder Alarm System
ICP-VR8488 | User's Guide | Notices EN | 2
Copyright Notice
Unless otherwise indicated, this publication is the
copyright of Bosch Security Systems, Inc. (“Bosch”).
All rights are reserved.
You may download a single copy of this publication.
By downloading the publication you agree that you
will: (i) only use the publication for your own
reference; (ii) not commercially exploit or charge any
person for the use of the publication; and (iii) not
modify the publication in any way without the prior
written permission of Bosch.
Except as specified above or where authorized by the
Copyright Act 1968 (Cth), no part of this publication
may be reproduced, transmitted, modified or stored,
in any form or by any means, without the prior
written permission of Bosch.
Notice of Liability
This material is designed for use by tradespeople
with expertise in the installation of this product.
Persons without appropriate expertise should seek
assistance before attempting installation.
While care was taken in the preparation of this
material, Bosch Security Systems, Inc. and its
representatives are not responsible to any person or
entity for any loss or damage directly or indirectly
caused by information in, or any omission from, this
material.
Bosch Security Systems, Inc. reserves the right to
make changes to features and specifications of its
products at any time without prior notification.
Bosch Security Systems, Inc. | 12/08 | F01U089638-01
ICP-VR8488 | User's Guide | Contents EN | 3
Contents
1.0 Getting to Know Your ICP-VR8488.............. 4
1.1 Zone Types .......................................................4
1.2 ICP-VR8488 Indicators ................................... 4
1.2.1 AC MAINS Supply Failure.............................4
1.2.2 Zone Indicators................................................. 5
2.0 Disarm Your ICP-VR8488.............................. 5
3.0 Arming Your ICP-VR8488.............................5
3.1 Arm in AWAY Mode......................................5
3.2 Arm in STAY Mode........................................5
4.0 Silencing Alarms ..............................................5
5.0 Add/Delete User Code/ RF Keyfob .............. 5
5.1 Add a User Code ............................................. 5
5.2 Add RF Keyfob................................................6
5.3 Delete a User Code/RF Keyfob.....................6
6.0 Change Domestic Telephone Numbers ........6
7.0 Setting Date and Time..................................... 6
8.0 Emergency Keys............................................... 6
9.0 Keyfobs..............................................................6
10.0 Glossary of Terms ............................................ 7
11.0 Installation Notes.............................................. 8
Figures
Figure 1: ICP-CP516 LCD Display .........................4
Figure 2: RF Keyfob Operations .............................6
Tables
Table 1: Zone Types ................................................4
Table 2: ICP-CP516 Indicator States ..................... 4
Table 3: Glossary of Terms.....................................7
Bosch Security Systems, Inc. | 12/08 | F01U089638-01
ICP-VR8488 | User's Guide | 1.0 Getting to Know Your ICP-VR8488 EN | 4
1.0 Getting to Know Your
1.2 ICP-VR8488 Indicators
ICP-VR8488
Your ICP-VR8488 Intruder Alarm System is made
up of a control panel and numerous detection
devices such as magnetic/motion sensors and
smoke sensors. You can operate the ICP-VR8488
using either the codepad or RF keyfobs. Your
security company will examine your premises and
divide it up into sections called zones.
If a detection device detects intrusion or smoke,
the status of the device changes from normal to
faulted. If a detection device becomes faulted
when the ICP-VR8488 is armed (AWAY Mode or
STAY Mode), the ICP-VR8488 sounds an alarm
and sends an alarm report by telephone to your
security company. Your security company takes
the appropriate action.
1.1 Zone Types
During installation, your security company might
configure zones on your ICP-VR8488 differently.
These different zones are described in Table 1 on
page 4.
Table 1: Zone Types
Type Description
Burglary A burglary zone is programmed to sound an
alarm only when a fault is detected and the
ICP-VR8488 is armed (AWAY Mode or
STAY Mode). When the ICP-VR8488 is
disarmed, burglary zones do not sound an
alarm if faulted.
24-Hour A 24-hour zone is programmed to sound an
alarm when a fault is detected (by a tamper
switch, for example) regardless of whether
the ICP-VR8488 is armed.
Fire A fire zone is programmed to sound an
alarm when a fault is detected (by a smoke
sensor, for example) regardless of whether
the ICP-VR8488 is armed.
Figure 1: Keypad Display
1 – Zone Indicators
2 – Service indicator
3 – Power indicator
4 – STAY indicator
5 – AWAY indicator
1.2.1 AC MAINS Supply Failure
If the AC MAINS supply fails, both the Power and
Service indicators flash. The keypad beeps once
every minute to warn you that the AC power
supply failed. Press the [#] key once to
acknowledge the AC fail condition and stop the
codepad beeping. When power is restored, the
indicator lights steadily again.
Table 2: Keypad Indicator States
Indicator Description
AWAY
STAY
Power
Service
Zone
Indicators
On – the ICP-VR8488 is armed in AWAY
Mode.
Off– the ICP-VR8488 is not armed in
AWAY Mode.
On – the ICP-VR8488 is armed in STAY
Mode.
Off– the ICP-VR8488 is not armed in STAY
Mode.
On – AC MAINS supply is normal.
Flashing (with Service indicator) – AC
MAINS supply failure.
On– a trouble condition exists. Contact your
security company.
Flashing (with Power indicator) – AC
MAINS supply failure.
On – the zone is faulted.
Off – normal condition.
Flashing – the zone is in alarm.
The OFF indicator lights when the
system is disarmed and flashes when a
zone becomes unsealed when
disarmed. The indicator stops flashing
when all zones are sealed.
The ON indicator lights when the
system is armed and flashes when an
alarm occurs. The indicator resets after
a valid User Code is entered.
Bosch Security Systems, Inc. | 12/08 | F01U089638-01
Loading...