BOSCH HydroPower 10H, HydroPower 13H, HydroPower 16H User Manual
Customer Contact Centre
To be installed and serviced only
Installation & Owner’s Guide
HydroPower
External Models
10H, 13H & 16H
by an authorised person
This appliance is not suitable for
use as a pool heater
The “authorised installing person”
is responsible for:
1. Correct commissioning of this
appliance.
2. Ensure unit performs to the
specifications stated on the rating
label.
3. Demonstrate operation of unit to
customer before leaving.
4. Hand these instructions to
customer
.
This appliance must be installed in accordance with the manufacturer’s
installation instructions, AS 5601 (AG 601), NZ 5261, AS3500.4.2 and all
Local Water, Building and Gas fitting regulations
.
Failure to install this appliance in accordance with these installation
instructions may void warranty
In the interest of continued product improvement, Bosch reserves the
right to alter these specifications without notice
1300 30 70 37
1
2
Table of Contents
!!""# !$$%&'(%# !
TABLE OF CONTENTS _________________________________________ 2
CONGRATULATIONS __________________________________________ 3
THE BOSCH STORY ___________________________________________ 3
PRODUCT OVERVIEW__________________________________________ 3
PRODUCT DIAGRAM___________________________________________ 4
OPERATING INSTRUCTIONS ____________________________________ 5
TROUBLE SHOOTING __________________________________________ 7
CARE AND SERVICING OF THE UNIT _____________________________ 7
10 BASIC STEPS FOR INSTALLATION ____________________________ 8
REGULATIONS_______________________________________________ 10
OVERVIEW OF WARRANTY CONDITIONS ________________________ 11
WARRANTY _________________________________________________ 11
3
Congratulations
Congratulations for choosing a Bosch HydroPower water heater. This appliance should give many
years of trouble free use, when installed to the specifications contained in this document.
The Bosch Story
Bosch Thermotechnology has
been delivering hot water to
Australia and New Zealand
families for nearly 50 years,
and forms part of the
worldwide Thermotechnology
division of Robert Bosch.
With global sales of 1.4
million water heaters every
year, Bosch provide hot
water solutions for every
water heating need.
Bosch pioneered continuous
flow water heating in the late
1800’s, and this tradition of
innovation and invention still
drives our company today.
Extensive research and
development ensures that
Bosch remains at the forefront
of water heating technology.
With an extensive product
range, Bosch strives to deliver
products designed to fit the
lifestyle of today’s modern
families.
Product Overview
HydroPower Ignition is exclusive to Bosch.
HydroPower uses the energy created by water flow to ignite the burner and begin the heating process.
The unit only starts when a hot water tap is opened. Once hot water is no longer needed, the unit turns
itself off.
1. Water enters the Hydro
Dynamic Generator
2. The turbine spins with water
flow
3. A spark is generated by the
turbine
4. The spark ignites the main
burner
5. The water continues on to the
heat exchanger and is heated
External HydroPower
External HydroPower models are perfect for a
constant, reliable supply of hot water. The
HydroPower ignition provides endless hot
water at the flick of a tap, without the need of
power point.
Versatile
• LPG models are particularly popular in
country areas, where reticulated gas is not
available and there is no external power
point.
• They are able to operate in relatively low
water pressure areas and in low
temperature regions of Australia and New
Zealand using Bosch accessories.
Economical
• Only heating water when required by the
user, the Bosch range is extremely
economical to run.
Internal HydroPower
Limited space need not mean limited hot
water. The Bosch range of internal hot water
heaters are created specifically to go places
where storage units will not, and will provide
endless hot water.
Versatile
• Operable without a power point
• Compact design
• Flexible connections
• Caters for a wide range of applications and
needs
Economical
• Only heating water when required by the
user, the Bosch range is extremely
economical to run.
Product Diagram
1. Main Cover
2. Inspection Window
3. Cold Water Inlet
4. Gas Inlet
5. Hot Water Outlet
6. Mounting Point
7. Horizontal Flue
A B C D E
405mm 845mm 533mm 240mm 68mm
405mm 845mm 533mm 240mm
450mm 936mm 533mm 240mm
Dimensions
Product Characteristics
Model BOSCH 10H BOSCH 13H BOSCH 16H
Inlet Gas Pressure NG
Inlet Gas Pressure LPG
Burner Gas Pressure NG
Burner Gas Pressure LPG
NHGC
Maximum Water flow at 50°C rise
Maximum Water flow at 25°C rise
Minimum water flow rate
1.13 kPa 1.13 kPa 1.13 kPa
2.75 kPa 2.75 kPa 2.75 kPa
0.89 kPa 0.84 kPa 0.78 kPa
2.60 kPa 2.60 kPa 2.60 kPa
79 Mj/hr 104 Mj/hr 130 Mj/hr
5 l/min 6.5 l/min 8 l/min
10 l/min 13 l/min 16 l/min
3.5 l/min 3.5 l/min 3.5 l/min
10H
13H
16H
68mm
82mm
Note:
Your water heating appliance requires a hot water flow rate of 3.5 litres per minute
and above to operate.
Water fixtures with a flow rate of 7.5 litres per minute or higher and Shower Roses of
9 litres per minute or higher are recommended.
Your water heating appliance is not to be used on Solar, Spa or recirculation
systems.
4
Loading...