Bosch HEI7052U/08, HEI7052U/07, HES7282U/08, HES7282U/06, HES7282U/07 Owner’s Manual

...
Electric
[r
es
..........._,_¢_,,:_:z
...........
Ranges with European Convection
Culslnlere €:lectnq ues avec Convection e Europenne Cocina Electnca con Conveccl6n Europea
........., u,,
:""i' 'I,,
?
"_,,
............iiiill,,,,,,,,'......
BOSCH
Invented for life
,,,,,,,,,,,,,,,,
j,,,,,,
""", ,,,,,,,,,,,,,,,,,,,,i,,
,,,, ,,, ..................
............................"""""' ' "_,,,,,,,,,,,,,,,,,,,,,,,,,,'_ii__:_'
,,,,,
,%
_,,_,¢_'
,,,,,,,,,,,,,,,,,,,,,,
Table of Contents
About This Manual ........................................... 1
How This Manual Is Organized ................................................... 1
Safety ..................................................... 1
Important Safety Instructions ..................................................... 1
Getting Started .............................................. 6
Parts and Accessories .......................................................... 6
Before Using the Appliance for the First Time ....................................... 15
Operation - Cooktop ......................................... 15
About the Cooktop ............................................................ 15
Operation ................................................................... 15
Operation - Oven ............................................ 18
About the Oven ............................................................... 18
Operation ................................................................... 18
Operation - Warming Drawer (some models) ...................... 21
About the Warming Drawer ..................................................... 21
Operation ................................................................... 22
Getting the Most Out of Your Appliance .......................... 23
Getting the Most Out of Your Cooktop ............................................. 23
Getting the Most Out of Your Oven ............................................... 25
Getting the Most Out of Your Warming Drawer ...................................... 32
Cleaning and Maintenance .................................... 33
Care and Cleaning ............................................................ 33
Maintenance ................................................................. 39
Service ................................................... 40
Self Help .................................................................... 41
Warranty .................................................................... 42
Questions?
1-800-944-2904
www. boschappliances.com
5551 McFadden Ave.
Huntington Beach, CA 92649
We look forward to hearing from you!
About This Manual
How This Manual
Safety
Is Organized
This manual contains several sections:
The Overview section describes the features and functionality of the range, including a description of how to set up the range and operate the range's control panel.
The three Operations sections describe how to operate and get the best per- formance out of each range component: the cooktop, oven, and warming
drawer.
The Cleaning and Maintenance section describes how to clean and maintain your range.
The Service section includes troubleshooting tips and your Warranty.
Before using your range, be sure to read this manual. Pay special attention to the Important Safety Instructions located at the beginning of the manual.
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
Important Safety Instruc- tions
Proper Installation and Maintenance WARNING: When properly cared for, your new appliance has been designed
to be safe and reliable. Read all instructions carefully before use. These pre- cautions will reduce the risk of burns, electric shock, fire, and injury to per- sons. When using kitchen appliances, basic safety precautions must be followed, including those in the following pages.
Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded by a qualified techni- cian. Connect only to a properly grounded outlet. Refer to Installation Instruc-
tions for details.
English 1
_, Safety
Allrangescantip.Injurytopersonscouldresult.Installanti-tipdevicepack- agedwithrange.Verifythattheanti-tipdevicesareengaged.Seeinstallation instructions.
Figure 1: Tipping Precautions
This appliance is intended for normal family household use only. It is not approved for outdoor use. See the Warranty. If you have any questions, con-
tact the manufacturer.
Do not store or use corrosive chemicals, vapors, flammables or nonfood prod- ucts in or near this appliance. It is specifically designed for use when heating or cooking food. The use of corrosive chemicals in heating or cleaning will damage the appliance and could result in injury.
Do not operate this appliance if it is not working properly, or if it has been damaged. Contact an authorized servicer.
Do not cook on a broken cooktop. Cleaning solutions and spillovers may cre- ate a risk of electric shock.
Do not obstruct oven vents.
Do not repair or replace any part of the appliance unless specifically recom- mended in this manual. Refer all servicing to a factory authorized service cen-
ter.
In the event of an error the display flashes and beeps continuously. If this hap- pens during self-clean, disconnect appliance from the power supply and call a qualified technician.
In the event of an error the display flashes and beeps continuously. Discon- nect appliance from the power supply and call a qualified technician.
Fire Safety Do not use aluminum foil or protective liners to line any part of an appliance,
especially surface unit drip bowls or oven bottom. Installation of these liners may result in a risk of electric shock or fire.
If materials inside an oven or warming drawer should ignite, keep door closed. Turn off the appliance and disconnect the circuit at the circuit breaker box.
Use this appliance only for its intended use as described in this manual. For example, never use the appliance for warming or heating the room. Never use the appliance for storage.
Do not allow aluminum foil, plastic, paper or cloth to come in contact with a hot burner or grate. Do not allow pans to boil dry.
If the cooktop is near a window, forced air vent, or fan, be certain that flamma- ble materials such as window coverings do not blow over or near the burners or elements. They could catch on fire.
Always have a working smoke detector near the kitchen.
Never leave the cooktop unattended when in use. Boilovers cause smoking and greasy spillovers may ignite.
English 2
,_ Safety
WARNING:
TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. EXERCISE CAUTION TO PREVENT BURNS. If
the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
NEVER PICK UP A FLAMING PAN--You may be burned.
DO NOT USE WATER, including wet rags or towels--a violent steam explosion will result.
Use an extinguisher ONLY if:
1) You know you have a CLASS ABC extinguisher and you already know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
In the event that personal clothing or hair catches fire, drop and roll immedi- ately to extinguish flames.
Whenever possible, do not operate the ventilation system during a cooktop fire. However, do not reach through fire to turn it off.
Have an appropriate fire extinguisher available, nearby, highly visible and easily accessible near the oven.
Smother flames from food fires other than grease fires with baking soda. Never use water on cooking fires.
Burn Prevention
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS - Surface units may be hot even though they are dark in color. Areas near surface units may
become hot enough to cause burns. During and after use, do not touch, or let clothing, potholders, or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among these areas are the cooktop and areas facing the cooktop.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN - Heating elements may be hot even though they are dark in color.
Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing, potholders, or other flammable materi- als contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns. Among these surfaces are oven vent openings, sur- faces near these openings and oven doors.
Exercise caution when opening the appliance. Standing to the side, open the door (or drawer) slowly and slightly to let hot air and/or steam escape. Keep your face clear of the opening and make sure there are no children or pets near the unit. After the release of hot air and/or steam, proceed with your cooking. Keep doors shut unless necessary for cooking or cleaning purposes. Do not leave open doors unattended.
Do not heat or warm unopened food containers. Build-up of pressure may cause the container to burst and cause injury.
Always place oven racks in desired location while oven is cool. If a rack must be moved while oven is hot, do not let potholder contact the heating elements.
Always use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
English 3
,_, Safety
Always turn hood ON when cooking at high heat or when flamb6ing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe').
Use high heat settings on the cooktop only when necessary. To avoid bub- bling and splattering, heat oil slowly on no more than a low-medium setting. Hot oil is capable of causing extreme burns and injury.
Never move a pan of hot oil, especially a deep fat fryer. Wait until it is cool.
Secure all loose garments, etc. before beginning. Tie long hair so that it does not hang loose, and do not wear loose fitting clothing or hanging garments, such as ties, scarves, jewelry, or dangling sleeves.
Avoid reaching or leaning over the appliance. Be aware that certain clothing and hair sprays may contain flammable chemicals that could be ignited if brought in contact with hot surface units or heating elements and may cause
severe burns.
Do not touch interior surface of the drawer while it is in use. The interior of the drawer could become hot enough to cause burns. Allow drawer and rack (if
equipped) to cool before handling.
WARNING: To prevent burns, do not remove drawer while hot. Be sure drawer is empty before removing.
Whenever possible, do not operate the ventilation system during a cooktop fire. However, do not reach through fire to turn it off.
WARNING:
Use thisapplianceonlyforitsintended use as described inthismanual. NEVER use thisapplianceas a space
heater to heat
carbon monoxide poisoning and overheating the appliance. Never use the appliance for storage.
or warm the room. Doing so may result in
WARNING:
NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as
aluminum foil. Doing so blocks air flow through the oven
and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard.
Never move a pan of hot oil, especially a deep fat fryer. Wait until it is cool. Use caution when cooking foods with high alcohol content (e.g. rum, brandy, bourbon) in the oven. Alcohol evaporates at high temperatures. There is a risk of burning as the alcohol vapors may catch fire in the oven. Use only small quantities of alcohol in foods, and open the oven door carefully.
Child Safety
English 4
When children become old enough to use the appliance, it is the legal respon- sibility of the parents or legal guardians to ensure that they are instructed in safe practices by qualified persons.
Do not allow anyone to climb, stand, lean, sit, or hang on any part of an appli- ance, especially a door, warming drawer, or storage drawer. This can damage the appliance, and the unit may tip over, potentially causing severe injury.
Do not allow children to use this appliance unless closely supervised by an adult. Children and pets should not be left alone or unattended in the area where the appliance is in use. They should never be allowed to play in its vicinity, whether or not the appliance is in use.
CAUTION:
Items of interest to children should not be stored in an
appliance, in cabinets above an appliance or on the back- splash. Children climbing on an appliance to reach items
could be seriously injured.
_, Safety
Cleaning Safety
IMPORTANT SAFETY NOTICE: The California Safe Drinking and Toxic Enforcement Act requires the Governor of California to publish a list of sub- stances known to the state to cause cancer, birth defects or other reproduc- tive harm, and requires businesses to warn customers of potential exposure to such substances. The burning of gas cooking fuel and the elimination of soil during self-cleaning can generate small amounts of Carbon Monox- ide.The fiberglass insulation in self-clean ovens gives off very small amounts of formaldehyde during the first several cleaning cycles. California lists form- aldehyde as a potential cause of cancer. Carbon Monoxide is a potential cause of reproductive toxicity. Exposure to these substances can be mini- mized by:
1) Providing good ventilation when cooking with gas.
2) Providing good ventilation during and immediately after self cleaning the
oven.
3) Operating the unit according to the instructions in this manual.
Do not clean the appliance while it is still hot. Some cleaners produce noxious fumes when applied to a hot surface. Wet cloths or sponges can cause burns
from steam.
When self-cleaning, confirm that the door locks and will not open. If the door does not lock, do not run Self-Clean. Contact service.
Birds have very sensitive respiratory systems. Keep pet birds out of the kitchen or other rooms where kitchen fumes could reach them. During self clean, fumes are released that may be harmful to birds. Other kitchen fumes such as overheating margarines and cooking oils may also be harmful.
Keep oven free from grease build up.
Cookware Safety
Food Safety
Do not place food directly on oven bottom.
Follow the manufacturer's directions when using cooking or roasting bags.
Hold the handle of the pan when stirring or turning food. This helps prevent spills and movement of the pan.
Use Proper Pan Size. The use of undersized cookware will expose a portion of the heating element or burner to direct contact and may result in ignition of clothing. Select cookware having flat bottoms large enough to cover the sur- face heating unit. This appliance is equipped with one or more surface units of different size. Proper relationship of cookware to heating element or burner will also improve efficiency.
Cookware not approved for use with glass ceramic cooktops may break with sudden temperature changes. Use only pans that are appropriate for glass ceramic cooktops (only certain types of glass, heatproof glass, ceramic, earthenware, or other glazed utensils are suitable). See Cookware Selection
Guide for further details.
Always position handles of utensils inward so they do not extend over adja- cent work areas, burners, or the edge of the cooktop. This reduces the risk of fires, spills and burns.
CAUTION: Plastic containers or plastic wrap can melt if in direct contact with the drawer or a hot utensil. If it melts onto the drawer, it may not be remov-
able.
CAUTION: To maintain food safety, follow these guidelines:
English 5
Getting Started
Parts and Accessories
1) DONOTuseawarmingdrawertoheatcoldfood(exception:itissafeto usethedrawertocrispcrackers,chipsordrycerealandtowarmplates.
2) Besuretomaintainproperfoodtemperature.TheUSDArecommends holdinghotfoodat140°Forwarmer.
3) DONOTwarmfoodforlongerthanonehour.
Free-Standing Models
J
9JJ \ \6 9
Slide-In Models
1
/3
/4
/
/
7or8 7or8
(model dependent) (model dependent)
Figure 2: Parts and Accessories
Table 1: Parts and Accessories Key
1 2
3 4
5 6
7 8
9 10 11
Oven Control Panel and Knob Cooktop Control Knob
Probe Receptacle Rack Positions/Rack Guides
Oven Racks, Flat (2 or 3; varies by model) Oven Door Gasket
Storage Drawer (some models) a Warming Drawer (some models) a
Model # and Serial # Plate Oven Vent
Anti-Tip Bracket (not shown)
English 6
12 13
14 15
16 17
18 19
2O 21
Cooktop Scraper (not shown) Weiman Cook Top® (glass ceramic cooktop cleaner)
(not shown) Broiler Pan (some models) (not shown) Oven Rack, Half (some models) (not shown) Oven Rack, Full Extension (some models) (not shown) Literature Package (not shown) Oven Lights (2) (oven back wall) (not shown)
Convection Fan and Element (oven back walt; not shown)
Broil Element (top of oven interior) (not shown) Oven Door Lock (not visible) (not shown)
GettingStarted
a.Dependingonthemodel,yourappliancehaseitherastoragedrawerorawarmingdrawer.
Note: To order additional accessories (i.e. broil pan, extension racks), contact Service or a dealer near you.
Radiant Element
Dual Element
Triple Element The triple element consists of three (small, medium and large) radiant ribbon ele-
Bridge Element (some models)
Retained Heat
Temperature Limiter
The radiant element uses a wire ribbon located under the glass ceramic surface to provide the heat for cooking. The radiant element will cycle on and off by design (see Temperature Limiter).
The dual element consists of two radiant ribbon elements within the same heating area. Either the small inner element or both the inner and outer elements may be
selected for use, in order to better match the size of cookware.
ments within the same heating area. Either the small element, the small and medium element or all three elements may be selected for use, in order to better
match the size of cookware.
The bridge element joins the front single element and the back single element to create one long oblong element. It is designed for use with large cookware such as long griddles and roasters.
The glass cooking surface retains heat and stays hot after the element(s) have been turned off. The retained heat may be used to hold foods at serving tempera- tures for a short time. If a hot surface light is on, use caution when working or cleaning around the cooktop as the cooktop is still hot.
Each radiant heating element has its own sensor to protect the glass cooking sur- face from extreme high temperatures. The limiters will operate automatically by cycling the element off regardless of the cook setting.
Hot Surface Indicator
Oven Racks
Flat Oven Racks
Although cycling is normal, any one of the following conditions can activate the limiter and cause it to cycle on and off more than usual:
The base of the pan is not making full contact with the heating surface (due to a warped or uneven base).
The pan is too small for the element.
The pan has boiled dry.
The material or shape of the pan is slow to transfer the heat.
The cooktop displays a hot indicator light to show when the cooking surface is too hot to touch. If a hot surface light is on, use caution when working or cleaning around the cooktop as the cooktop is still hot.
Depending on model, the range is equipped with one of the following combina- tions:
Three flat racks
Two flat racks and one full extension rack
Two flat racks and one half rack
The racks are designed with a stop so they will stop before coming completely out of the oven and not tilt.
CAUTION
To avoid burns, place oven racks in desired positions before turning oven on. Always use oven mitts when the oven is warm.If a rack must
be moved while the oven is hot, do not let oven mitts contact hot heat- ing elements.
Inserting Racks Into Oven
English 7
GettingStarted
1. Grasprackfirmlyonbothsides.
2. Tiltrackuptoallowstopintorackguide.
3. Bringracktoahorizontalpositionandpresstherestofthewayin.Rack shouldbestraightandflat,notcrooked.
Back of rack
Front of rack
Insert rack with the back of the rack toward the back wall of the range.
Figure 3: Inserting a Rack
Removing Flat Racks From Oven
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
Extension Oven Rack (some mod- els)
The Full Extension Rack allows for easier access to cooking foods. The bottom section extends as far as the standard flat rack. However, the top section extends beyond the bottom section bringing the food closer to the user.
Back of Rack Pan Stops
Top Rack
Top Rack
Bottom
----_ _Stop (Ball)
Rack
Stops F _/_Rack Guide
__ Top Rack Rest
_j--
Front of Rack
Figure 4: Full Extension Rack
Removing and Replacing
Note: The full extension rack must be in the closed position when removing and
replacing. Grasp the entire rack (both sections).
English 8
,
Grasp the bottom section and pull straight out.
2.
Once the stop is reached, grasp the top section and pull straight out until the second stop is reached. Ifthe top rack will not extend fully, it is not installed correctly. Reinstall it so that the pan stop is in the back of the oven.
Disassembly (for cleaning)
The two sections of the rack are designed to come apart for easier cleaning.
1. Place rack on flat surface in the closed position top side up.
2. Rotate one side of top rack towards you until it is past the stop (ball).
3. Pull the rack up and out, rotated side first.
GettingStarted
Closed Position
Reassembly
Back of Rack
(Ball)
Front of Rack
Figure 5: Disassembly
CAUTION
Always verify that top rack is installed correctly after reassembly. The
back edges of the top rack must be under the rack guide on the bottom rack. DO NOT simply rest the top rack on top of the bottom one.
1. To reassemble rack, hold top rack diagonally across bottom rack.
2. Insert one side of top rack to closed position.
3. Rotate the other side toward the back of the rack until it passes the stop (ball).
4. Push top rack the rest of the way in (See Figure 3).
Half Oven Rack (Some Models)
Closed Position
Cleaning
Clean rack with hot sudsy water. Dry thoroughly. For stubborn dirt, use a soap filled steel wool pad. DO NOT clean the rack in the self-cleaning oven.
The half oven rack can be used as a simple flat rack or as a half-sized rack. With the right half of the rack removed, you can place a tall item (such as a turkey) on one side of the rack below and a shorter item (such as a casserole) on the other side. A second shorter item can then be placed on the half rack (above the first shorter item). This allows for easier access to all items and better utilization of the oven cavity.
Back of Rack
Stop (Ball)
Front of Rack
Figure 6: Reassembly
English 9
GettingStarted
Tip: The removable section can also be used outside of the oven as a trivet or cooling rack.
Figure 7: Half Oven Rack
Oven Bottom
Oven Vent
Automatic Shutoff
Self-Cleaning
Indicators and Other Features
Do not place food directly on oven bottom. Do not use aluminum foil or protective liners to line any part of an appliance, especially surface unit drip bowls or oven bottom. Installation of these liners may result in a risk of electric shock or fire.
Free-standing Models:
The oven vent is located below the display above the rear left cooktop element. It is normal to see steam escaping from the vent and condensation may collect on the backguard and cooktop. This area may become hot when the oven is in use. Do not block the vent as it is important for air circulation.
Slide-in Models:
The oven vent is located above the oven door handle. Warm air may be released from the vent before, during and after cooking. It is normal to see steam escaping from the vent and condensation may collect in this area. This area may be warm when the oven is in use. Do not block the vent as it is important for air circulation.
The oven will automatically shut off after 12 hours (24 hours if the time format is set for 24 hour in the Select Function section).
The oven features a self-cleaning function that eliminates the manual labor involved with cleaning your oven.
Beep - Signals that more information must be entered or confirms the receipt of an entry. A Beep also signals the end of a program or an oven error.
Cooling Fan (Slide-in models only)
English 10
End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive beeps will sound.
Default Settings - The cooking modes automatically select the default tempera- ture. These can be changed when a different one is needed.
Flashing Symbol or Number - Signals an incomplete setting and calls for another step or START to be pressed.
F Number Codes -These codes display when there is a problem with the range.
The cooling fan runs during all oven modes. You may hear it running and you may feel warm air as it is released from the oven vent. This is normal. When the oven
has cooled to a pre-determined temperature, the cooling fan turns off.
Convection Fan
Control (Panel)
Oven Control Panel
Getting Started
The convection fan operates during any convection mode. When the oven is oper- ating in the convection mode, the fan will turn off automatically when the door is opened. The convection fan does run during self-clean, although not at the begin- ning of the mode.
Note: On some models, the convection fan also runs during preheat for the bake mode.
Clock Oven Temperature
Light
Time
Off
/J" /t7
Preheat Temperature
/LDllrIL
Cooking Lock Indicator
Mode Indicator
Table 2: Oven Control Panel
Clock- Shows the time of day with a 12 or 24 hour option. Also displays the timer and times associated with delayed cooking and cleaning modes. Turn the control knob to tog- gle between timer and clock display. Press Time and turn
the control knob to change the time of day or the timer.
Cooking Mode - Press pad to display cooking mode. Cooking Mode Icon - Shows the cooking elements that
are active for the mode that is selected. The icon will also display a fan if the convection fan is utilized in the selected
mode. Control Knob - Used to set the clock, timers, select cook-
ing mode and temperature. Turn clockwise to increase and turn counterclockwise to decrease.
Light - Press pad to turn oven light on or off. Door Locking Indicator- Icon is displayed during the
self-clean mode when the door is locked. DO NOT attempt to open the door until the lock symbol is no longer present.
Control Knob
Z
Cooking Mode
Temperature O
Start
Figure 8: Oven Control Panel
Off - Press pad to turn off oven and/or warming drawer. Oven Temperature - Shows the oven temperature. Preheat Temperature - Displays temperature of oven dur-
ing preheat mode. Probe Indicator (some models) - Indicates that the probe
is properly inserted into the probe receptacle in the oven. Start - Press pad to complete an entry.
Temperature - Press pad to select cooking temperature. Time - Press pad to set or change the time of day or the
timer. Timer - There are two timers - TIMER 1AND TIMER 2;
Each counts down the time in hours and minutes. With less than 60 minutes remaining, the timer also displays
seconds. Press Time to access the timers. Warming Drawer Indicator - Indicates that the warming
drawer (some models) is on. Also displays the warming drawer setting.
You control the operation of the range by using the touch pads and dial on the backguard and the knobs on the front panel.
The backguard touchpads, in conjunction with the dial on the backguard, are used to select an oven mode, set the oven temperature, set the time(s) and to set up your range. To use the touchpad, press the center part of the pad with the flat part of your fingertip. A beep will sound to indicate that the selection has been made. Turn the dial on the backguard to the desired setting and press start.
The knobs on the front panel of the range are used to control the heat level of the elements. Push down and turn to the desired temperature.
English 11
GettingStarted
The Clock
See the sections on Using the Cooktop, Using the Oven and Using the Warming Drawer for detailed instructions.
About the Clock
Setting the Clock
Changing the Clock
Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults to 12:00 am.
The time of day is displayed in hours and minutes.
The clock time will appear during all oven operations except when the timer is running.
The oven is preset to a 12 hour clock and indicates AM and PM. To switch to a 24 hour clock, see "Select Function" section.
If you do not complete the operation of setting the clock, the oven will beep periodically as a reminder to set the clock time. Press OFF to stop the beep- ing.
1. CLOCK will be displayed and the hour digits will flash. Turn knob to select hour and AM or
PM.
2. Press Time. CLOCK will still be displayed and the minute digits will flash.
3. Turn knob. Set minutes.
4. Press Time and the clock is now set.
Note: If operation is not completed, the oven will beep periodically as a reminder to set clock time. Press OFF.
1. Press Time. TIMER 1 flashes in display.
2. Turn knob to select CLOCK.
3. Press Time and hour digits flash.
4. Turn knob to change hours.
5. Press Time again and minute digits flash.
6. Turn knob to change minutes.
7. Press Time again and the clock is set.
The Select Functions Menu
4_,) Change the Beep Vol-
ume
Note: To cancel the TIME selection when setting the clock, press OFF at any time
while in the clock mode.
SELECT FUNCTIONS is the section of the menu where you can set or change the range features listed below.
To access the SELECT FUNCTION menu
1. Press and hold COOKING MODE press pad for five (5) seconds. SELECT FUNCTION is displayed.
2. Turn knob slowly to desired feature. There will be a slight delay before each message (or feature) can be seen in the display. Turn knob slowly and wait approximately one second for display to show next feature.
3. Press START to choose the function.
4. Turn knob to desired setting and press START. When all settings for the function are complete, SELECT FUNCTION flashes again.
5. Press OFF to exit the Select Functions Menu.
The volume of the control beep can be changed from LOW (softest) to HIGH (loudest). The control default for beep volume is Medium.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until VOLUME is displayed.
English 12
3. Press Start.
4. Turn knob to select volume level Low, Medium or High.
5. Press Start.
Getting Started
/
G
ABC
Change the Tempera- ture Scale
Turn Clock Display ON or OFF
Access Demo Mode
Change the Display
Language
The oven has been preset to the Fahrenheit temperature scale. The feature allows you to switch between Fahrenheit and Celsius temperature.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until SELECT TEMP F-C is displayed.
3. Press Start.
4. Turn knob to select Fahrenheit (F) or Celsius (C).
5. Press Start to accept new selection.
Clock time display can be turned off. The default display is on.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until CLOCK DISPLAY is displayed.
3. Press START.
4. Turn knob to select ON or OFF
5. Press START to accept new selection.
The demo mode is for appliance store use only.
Language choices are English, Spanish, and French. English is the default lan- guage. Note: The SELECT FUNCTIONS menu is displayed in English only, regardless of which language is selected.
Lock / Unlock the Oven
Control Panel
Change the Oven Temperature Offset
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until desired language is displayed.
3. Press Start.
4. Turn knob clockwise to select a different language.
5. Press Start to accept a language change.
The oven keypad can be locked for safety purposes. This feature can be used to prevent changes to the oven function. This function DOES NOT lock the oven
door.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until LOCK KEYS is flashing.
3. Press Start. KEY PAD LOCKED is displayed. The display will beep if a key is pressed to indicate that the keypad is locked.
4. To unlock keypads, press Cooking Mode and hold for 5 seconds. Display will read UNLOCKING KEY PAD.
5. When unlocked, the clock will again appear in the display.
This feature allows the adjustment of the oven temperature if food is consistently too brown or too light.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until OVEN TEMP OFFSET is displayed.
3. Press START. 0° F is displayed.
4. Turn the knob to the right to increase temperature to +25° F and to the left to decrease to -25° F. The temperature changes by 5° F increments.
5. Press START to accept a temperature change.
English 13
GettingStarted
T
Reset the Factory Set-
tings
Set the Sabbath Feature
This feature is used to change all the "Select Functions" settings back to the origi- nal factory settings (or defaults).
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until RESET DEFAULTS is displayed.
3. Press START. Display reads SELECT FUNCTIONS.
About the Sabbath Feature
The Sabbath Feature is for religious faiths with "no work" requirements on the Sabbath.
The oven will bake for 73 hours before automatically turning off.
While baking in Sabbath mode, the display will show SABBATH and the BAKE icon will be displayed. The clock will be off and no temperature will show in the display.
During the Sabbath mode, only the OFF key will operate. Press OFF at any time during the Sabbath mode to end the mode and turn off the oven.
At the end of 73 hours, the oven will turn off automatically and the display will show SABBATH END. Press Off to return to time of day.
The warming drawer does not operate with the Sabbath feature unless the feature is also activated in the oven.
The probe CANNOT be used during the Sabbath mode.
Setting the Sabbath Feature for the Oven Only
1. Verify that the oven is turned off.
2. Access SELECT FUNCTIONS Menu.
3. Turn knob clockwise until SABBATH OPTION appears.
4. Press START. BAKE will show in display and temperature will flash.
5. Turn knob to set oven temperature.
6. Turn oven light on if desired (press LIGHT).
Note: The light cannot be changed after this point. It will stay on or off, as selected, during the entire Sabbath mode.
7. Press START. Oven starts after 5 seconds.
The oven operates for 73 hours and then turns off automatically.
Setting the Sabbath Feature for both the Warming Drawer and the Oven.
Note: warming drawer does not operate with the Sabbath feature unless the fea-
ture is also activated in the oven.
1. Turn the warming drawer on to the desired heat setting. See "Turning on the Warming Drawer" on page 22.
2. Verify that the oven is turned off.
3. Access SELECT FUNCTIONS Menu.
4. Turn knob clockwise until SABBATH OPTION appears.
5. Press START. BAKE will show in display and temperature will flash.
6. Turn knob to set oven temperature.
7. Turn oven light on if desired (press LIGHT).
Note: The light cannot be changed after this point. It will stay on or off, as selected, during the entire Sabbath mode.
8. Press START. Oven starts after 5 seconds. Sabbath Feature is activated for both the warming drawer and the oven.
English 14
Theovenandwarmingdraweroperatesfor73hoursandthenturnoffautomati- cally.
Setting the Sabbath Feature for the Warming Drawer Only
The warming drawer does not operate with the Sabbath feature unless the feature is also activated in the oven. See "Setting the Sabbath Feature for both the Warm- ing Drawer and the Oven." on page 14.
G
Change the Time
Format
Turn Automatic Convection Conversion
ON or OFF
The clock can be set to a 12 hour or 24 hour format. The default for clock format is
12 hour.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until TIME FORMAT is displayed.
3. Press Start.
4. Turn knob to select 12 hour or 24 hour format.
5. Press Start to accept new selection.
This feature automatically converts package or recipe temperatures for use with the convection bake mode. The default setting is "on".
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until AUTO CONVECT BAKE is displayed.
3. Press Start.
4. Turn knob to select ON or OFF.
5. Press Start to accept new selection.
Before Using the Appliance for the First Time
Remove all packing materials and labels from range. Remove packing materi-
als from inside the oven and inside the drawer.
While cool, wipe with a clean, damp sponge and dry.
Apply the glass ceramic cooktop cleaner to the glass ceramic cooktop. Buff with a clean cloth. See Care and Cleaning Section.
There may be a slight odor during first uses; this is normal and will disappear.
Optimum cooking results depend on proper cookware being used.
The cooking surface will hold the heat and remain hot up to 30 minutes after the elements have been turned off.
Read and understand all safety precautions and Use and Care Manual infor- mation prior to operating.
Operation - Cooktop
This section explains how to operate the cooktop. See "Getting the Most Out of Your Cooktop" on page 23 for guidelines to improve cooktop results.
About the Cooktop
Use the cooktop for surface cooking applications such as boiling, frying, simmer- ing, steaming and sauteing.
Operation
English 15
Operation-Cooktop
CAUTION
Foods packaged in aluminum foil should not be placed directly on
the glass ceramic surface for cooking. Aluminum foil can melt and
cause permanent damage.
Plastic, paper and cloth can melt or burn when in contact with a hot surface. Do not let these items come in contact with the hot
glass ceramic surface.
Do not allow pans to boil dry. This can permanently damage the pan, the element and the cooktop glass.
Failure to operate knobs properly may result in personal injury and damage to the appliance.
Setting the Burner Heat Level
Single Element Control Knob To turn on a single element, push in on the control knob and turn in either direc-
tion to the desired heat setting.
OFF
1 9
Dual Element Control Knob
Triple Element Control Knob (some models)
6 CS
5
Element Location
./
J
Figure 9: Single Element Burner Knob
To turn ON the small, inner element, push in on the control knob and turn it coun- terclockwise. Set to desired heat level.
To turn ON both the inner and outer elements together, push in on the control knob and turn it clockwise to the desired setting.
OFF
9 9
3
_o 1' '1 o
/ \ \
Inner Element Outer Element
/
Element Location
Figure 10: Dual Element Burner Knob
To turn on the small inner element only, push in on the control knob and turn it to the O symbol (counterclockwise). Turn knob left or right to set the heat level.
English 16
To turn on the inner and middle elements, push in and turn the control knob to the @ symbol. Turn knob left or right to set the heat level.
Operation- Cooktop
Toturnonallthreeelements,Pushinandturnthecontrolknobtothe@ icon. Turnknobleftorrighttosettheheatlevel.
9 _iiFt:
Bridge Element Control Knob (some models)
Inner Element 0
Only
All Three
_) Elements
\
© \
Inner and Middle Element
Figure 11: Triple Element Knob
The bridge element connects two single elements to create one long cooking sur- face.
Depending on the model, the bridge element is either activated in conjunction with the front single element (_) or the rear single element (_). Refer to the control
knob on your appliance to determine your configuration.
Turn ON the bridge element and the small element together
1. Push in on the control knob and turn clockwise to the desired heat setting. Tip: To complete the connection and create an even longer cooking surface, turn ON the other single element, too.
To use the single element without bridge
1. Turn the knob counterclockwise.
Bridge element activated with
front single element:
OFF
9 9
3"
\ / \
Rear Single Element j Element Location
Bridge Element with Rear Single Element
Surface Elements Disabled During Self Clean (some models)
Bridge element activated with
rear single element:
OFF
9 9
7_
5"
3
Front Single Element Element Location
Bridge Element with Front Single Element
Figure 12: Bridge Element Knob
Two or more surface elements are automatically disabled during Self-Clean Operation only. This is normal. Once the Self-Clean cycle is complete and the oven has cooled, the elements become operable once again.
WARNING:
To avoid risk of personal injury, do not operate the cook top and
ensure that all surface controls are turned off while the self clean cycle is operating.
English 17
Operation - Oven
This section explains how to operate the oven. See "Getting the Most Out of Your Oven" on page 25 for guidelines to improve oven results.
About the Oven Operation
CAUTION
Do not use aluminum foil or protective liners to line any part of an appli- ance, especially surface unit drip bowls or oven bottom. Installation of
these liners may result in a risk of electric shock or fire.
Setting the Cooking Mode
and Temperature
Note: To back out of a current mode, press OFF. (Selecting OFF when not setting
the cooking mode will turn the oven off.)
,
Press COOKING MODE.
2.
SELECT COOK MODE will flash in the display.
3.
Turn knob to display cooking modes.
4.
BAKE will flash in the display.
5.
If no change is made within 5 seconds, control will beep and flash. If this occurs, press START.
,
To change the cooking mode, turn knob.
7.
Press START.
8.
The selected mode will appear in the display, along with the default tempera- ture for that mode, which will be blinking.
,
To select a different temperature, turn knob to the right or left (in 5° incre- ments) to desired temperature.
10.
Press START. If not pressed, oven automatically turns on in 5 seconds.
11.
The display alternates between the cooking mode and preheat.
The preheated temperature is displayed, starting at 100°F. The actual tempera- ture increases until set temperature is reached, at which point the oven will beep.
12. To change temperature during cooking, press Temperature. Turn the knob to select new temperature and press START.
13. Once cooking has been completed, press OFF to turn off oven.
Automatic Convection Conversion (models with convection bake)
English 18
In the convection bake mode, the temperature is automatically reduced 25° F from the package or recipe temperature. Simply enter the package or recipe tem- perature when setting the mode and the range calculates the correct temperature.
The Automatic Convection Conversion feature can be turned off to allow for man- ual temperature adjustment. See "Turn Automatic Convection Conversion ON or
OFF" on page 15 for details.
When the Automatic Convection Conversion feature is activated, the display will read AUTO CONV BAKE. When the feature is turned off, it will read CONV BAKE.
Hot Oven Indicator
Operation - Oven
After the oven has been turned off, HOT appears in the display where the cooking mode was to indicate that the oven is off but still hot. When the oven temperature drops below 176° F, HOT is no longer seen in the display.
Using the Timer
Notes:
If you do not finish setting the timer, the oven will beep periodically as a reminder to set the time. Press OFF to exit the TIMER mode. (Selecting OFF when not setting the timer will turn the oven off.)
Turn the knob to display the time of day or further information about the oven mode when the timers are in use.
To set the timer:
1. Press TIME and TIMER 1 will flash in display.
Turn clockwise and TIMER 2 will be displayed. Select TIMER 1 or 2, then press TIME. SET TIMER 1(2) appears in display. Minutes flash.
,
Turn knob to set minutes. If setting only minutes, press START. Otherwise, continue to step 4.
,
Press TIME again and the hours will flash.
4.
Turn knob to set hours.
5.
Press TIME again. The TIMER is now set.
6.
If TIME or START is not pressed, oven will begin beeping and timer display will begin flashing.
Changing the Timer/s
Clearing the Timer/s
Cancelling
Using Timed or Delayed Cook
,
Press TIME. TIMER 1 will appear in display. Select either TIMER 1 or 2.
,
Press TIME. RESET TIMER 1 (2) appears in the display. Minute digits flash.
,
Turn knob clockwise or counterclockwise to change minutes.
4.
Press TIME again and hour digits will flash.
5.
Turn knob clockwise or counterclockwise to change hours.
6.
Press TIME and new time is set.
1. Press TIME once. TIMER 1 flashes.
2. Turn knob to select CLEAR TIMER 1(2). Press TIME.
3. If Time pad is not pressed, range will beep and display will continue flashing.
4. Press TIME to return to the main screen.
If operation is not completed, the oven will beep periodically as a reminder to set time. Press OFF to exit the Timer mode. Selecting OFF when not in a setting
mode will turn off the oven.
The TIMED COOK feature sets the oven to a cooking mode for a set period of time and then turns it off. The TIMED COOK feature is available for each of the
following oven modes: Bake, Convection Bake and Convection Roast.
Be sure that the time-of-day clock displays the correct time before beginning. See "Changing the Clock" on page 12 to adjust the time.
At end of the programmed cooking time, the oven will automatically turn off.
Delayed cooking is not recommended for foods that need to rise (i.e.; cookies, cakes, breads, souffles, etc.)
English 19
Operation-Oven
Setting a Timed Mode
1. Press COOKING MODE.
2. SELECT COOK MODE will be displayed.
3. Turn knob to display cooking modes.
4. BAKE will flash in the display. Turn knob to change the cooking mode.
5. Press START.
6. Turn knob to select desired temperature. Note: Time required for the oven to reach temperature must be included in
the set cooking time.
,
Press TIME. TIMED BAKE appears.
8.
Press TIME. SET BAKE TIME appears in the display and minutes flash.
,
Set minutes. Press TIME.
10.
Hours Flash. Set hours. Press START.
11.
TIMED BAKE appears in display and the oven begins to preheat.
After cooking is complete, display flashes TIME COOK END and reminder beeps will sound. Press OFF to clear.
Delaying the Start of a Timed Mode
To Check the Cooking Time and Stop Time After a Delay Has Been
Set
Setting the Sabbath Feature
,
Follow steps 1 through 7 above.
2.
Turn knob until DELAYED BAKE appears.
3.
Press Time. SET BAKE TIME appears in dis- play and minutes flash.
,
Set minutes and then press TIME. Hours Flash.
5.
Set hours and then press TIME. SET BAKE END appears in the display.
6.
Press TIME.
7.
Use knob to enter the time of day the oven will stop cooking or turn off.
8.
Set hours and then press TIME.
9.
Set minutes and then press TIME. Note: The clock automatically calculates time of day at which cooking mode
starts and stops. The displayed cooking time counts down by the minute.
10.
At the end of the programmed cooking time, the oven will automatically turn off. Display will show TIME COOK END and reminder beeps will sound. Press
OFF to clear. Note: Remove food from oven immediately after cycle has finished to prevent
overcooking. Food left in the oven will cook even after the cycle is complete.
1. Press Time.
2. Turn knob to BAKE END or BAKE TIME.
3. Press Time.
See "Set the Sabbath Feature" on page 14.
Using the Probe (some models)
Setting the Probe
English 20
This section explains how to operate the probe. See "The Probe (some models)" on page 26 for guidelines, tips and suggestions.
The probe can be used to determine the internal doneness or the "END" tempera- ture of many foods,especially meats and poultry.
The temperature range for the probe is 135°F to 200°F (57°C to 93°C). Oven tem- perature can be set for 100°F up to 450°F (38°C up to 232°C).
,
Prepare meat and place in roasting pan (or on rack in roasting pan as recipe specifies). Insert the probe into the meat. Make sure the probe is not touching gristle, fat, bone, the roast rack or the pan. See "Inserting the Probe" on page 26 for detailed instructions.
Note: Do not connect to probe receptacle until probe tip is properly inserted into meat.
2. Place roasting pan with meat in cold oven on recommended oven rack. Plug probe into the probe receptacle. The probe symbol will appear in display.
Note: The probe temperature can only be set when the probe is installed in the oven.
3. Press COOKING MODE then rotate knob to select BAKE, CONVECTION BAKE or CONVECTION ROAST.
4. Press START. The default oven temperature will appear.
5. Turn knob to change oven temperature if necessary.
6. Touch START.
7. Turn knob to set the probe temperature (desired end temperature of the food).
8. Press START.
The chosen oven temperature is displayed in the upper right hand corner of the display.
The probe temperature is displayed in the center to the left of the cooking mode. It starts at 80 degrees and increases in 5°F increments until the chosen probe tem- perature is reached.
The oven is preheated when the beep signals once.
When the set probe temperature is reached, END appears in display and oven turns off.
Changing the Oven Temperature When Using the Probe
Changing the Probe Temperature
1. Touch TEMPERATURE. Oven temp will flash in the display.
2. Turn the knob to desired temperature and press START twice.
1. Touch TEMPERATURE. The oven temperature will flash.
2. Press start and PROBE TEMP will flash.
3. Turn the knob to desired temperature and press START again.
Note: Always remove probe from oven when cooking is complete. The probe symbol will remain in the display until the probe is removed. Do not leave probe attachment in oven during self-clean. Oven will not self-clean with the probe
installed in the oven
Operation - Warming Drawer (some models)
This section explains how to operate the warming drawer. See "Getting the Most Out of Your Warming Drawer" on page 32 for guidelines to improve warming
drawer results.
About the Warming Drawer
The warming drawer will keep hot, cooked foods at serving temperature. Warming drawer settings are Low, Medium, and High.
English 21
Operation-WarmingDrawer(somemodels)
Warming Drawer Specifi- cations
Parts Key:
1. Drawer Interior
2. Gasket
3. Rail Lock
Drawer Interior: 25" W x 17" D x 5" H
Dish sizes:
2 -9 x 13" Pyrex 3-quart dishes, side by side.
2 -9 1/2 x 15" Pyrex 4-quart dishes, side by side.
4 -10 1/2" plates, single or stacked
3 -11" plates, single or stacked
Warming Drawer Settings: The warming drawer has three settings: Low, Medium and High The icons below are seen in the display when the corresponding setting is selected:
Figure 13: Warming Drawer Parts
LowW
Operation
Preheating
Medium W
High
Figure 14: Warming Drawer Settings
CAUTION
To maintain food safety, follow these guidelines:
DO NOT use the warming drawer to heat cold food (exception: it is safe to use the drawer to crisp crackers, chips or dry cereal and to warm plates).
Be sure to maintain proper food temperature. The USDA recom- mends holding hot food at 140°F or warmer.
DO NOT warm food for longer than one hour.
Plastic containers, plastic wrap or aluminum foil can melt if in direct contact with the drawer or a hot cooking container. If it melts onto the drawer, it may not be removable.
For best results, preheat the warming drawer when warming food.
Preheat Times:
Turning on the Warming
Drawer
When Only Using the Warming
Drawer
English 22
Low: 10 minutes
Medium: 15 minutes
High: 20 minutes
1. Press COOKING MODE.
2. SELECT COOK MODE will be displayed.
3. Turn knob to select WARMING DRAWER.
4. Press START.
5. Turn knob to select heat setting.
6. Press START.
When Also Using The Oven
Setting the Sabbath Feature
Turning Off the Warming Drawer
When Only Using the Warming Drawer
When Using the Warming Drawer and the Oven
Crisping Stale Items
1. Press COOKING MODE.
2. Press START to select WARMING DRAWER.
3. Turn knob to select heat setting.
4. Press START.
Note: The warming drawer does not operate with the Sabbath feature unless the feature is also activated in the oven. See "Setting the Sabbath Feature for both the Warming Drawer and the Oven." on page 14.
1. Turn the warming drawer on the desired heat level.
2. Activate the Sabbath Feature. See "Set the Sabbath Feature" on page 14.
1. Press OFF.
1. Press OFF.
2. Turn knob to select CANCEL DRWR, CANCEL OVEN, or CANCEL BOTH.
3. Press OFF.
Place food in low sided dishes or pans.
Preheat on Low.
Check crispness after 45 minutes. Add time as needed.
Warming Empty Serving Bowls and Plates
Use only heat-safe dishes.
Warm on setting appropriate for cooking container.
Check dish temperature during warming period.
Place empty plates or dishes in a cold warming drawer. Do not preheat drawer prior to placing dishes.
Getting the Most Out of Your Appliance
Getting the Most Out of Your Cooktop
Cooktop Cooking Guide
Boiling Water Time to boil can vary greatly depending on environmental conditions. Try the fol-
lowing tips to decrease boil time:
Use a lid.
Use a pan that is appropriately sized for the amount of water and the size of the element.
Select a pan with a fiat base (See "Cookware Selection Guide" on page 24 for details).
Choose a medium-weight pan (rather than a heavy-weight one).
English 23
GettingtheMostOutofYourAppliance
Make sure that the pan is positioned so that the entire base is in contact with the element.
Start with water that is already warm.
Boil the smallest amount of water necessary. Smaller volumes will boil faster than larger volumes.
Recommended Settings
Use this chart as a guide for heat settings. A range of heat settings are listed because the actual setting depends on:
type and quality of pan (See "Selecting Cookware"),
type, quantity and temperature of the food,
element used and
the cook's preference.
The Heat Settings recommended are based on a 240 volt power source. Ifyour cooktop is connected to 208 volts, the same heat settings apply but foods may take a little longer to finish cooking.
Table 3: Cooking Guide
Bringing water to boil Pan frying, sauteing, browning meat, deep fat frying Most frying, eggs, pancakes, stow boil Simmering, finish cooking, covered foods, steaming Melting butter and chocolate
9 - High 6-8 - Med-High
4-5 - Med
2-3 - Med Low 1 - Low
Bridge Element Tips (some models)
Cookware Selection Guide
Cookware Characteristics
To Test the Flatness of Your Pans
Use the bridge elements with only one single element for medium sized grid- dles and oval pots.
For even heat distribution when using all three elements, start with the back element at a slightly higher setting than the front and bridge elements. Observe cooking performance and adjust accordingly.
When using a pan that spans all three elements, set the back element at a dif- ferent heat level than the front and bridge elements to keep prepared food warm or to prepare two different foods at one time.
Pan selection directly affects cooking speed and uniformity. For best results select pans with flat bases. When a pan is hot, the base (pan bottom) should rest evenly on the surface without wobbling (rocking). Flat, medium-to-heavy-weight pans are
best.
Turn the pan upside down on the countertop and place a ruler flat against the bottom of the pan. The bottom of the pan and the straight edge of the ruler should be flush against each other.
English 24
GettingtheMostOutofYourAppliance
Anothersimpletesttodetermineevenheatdistri- butionacrossthecookwarebottomistoplace1" (25.4mm)ofwaterinthepan.Bringthewatertoa
boilandobservethelocationofthebubblesasthe waterstartstoboil.Good,flatcookwarewillhave anevendistributionofbubblesoverthebottom surfacearea.
Matching Diameters - The base of the pan should cover or match the diameter of the element being used. Pans may overhang the element area by 1" (25.4 mm)
all around.
Tight Fitting Lids - A lid shortens cooking/boiling time by holding heat inside the pot.
Cookware Tips Use of pots and pans with rounded (either concave or convex) warped or
dented bottoms should be avoided. See drawings below.
Make sure the bottom of the pot or pan being used is clean and dry.
Use pots and pans with thick, smooth metal bottoms.
Do not slide metal pots across the cooktop. Pans may leave marks which need to be removed immediately. See Care and Cleaning Section.
Do not use glass pans as they may scratch the surface.
Specialty Pans Specialty pans such as griddles, roasters, pressure cookers, woks, water bath
canners and pressure canners must have the same features as described above. Use only a flat-bottomed wok. Never place a support ring, such as a wok ring or trivet, on the cooking surface.
Getting the Most Out of Your Oven
Oven Cooking Guide
Rack Position
RACK POSITION 6 (highest position) - melting cheese, broiling thin foods
RACK POSITION 5- broiling most meats, toasting bread
4
1
RACK POSITION 4 - broiling thicker meats
RACK POSITION 3 - most baked goods when baking on one rack, such as on cookie sheet or baking pan, cakes, frozen foods, biscuits, brownies,
muffins
RACK POSITION 2 - Used for pies, casseroles, breads, bundt or pound cakes, small roasts or poultry.
RACK POSITION 1 (lowest position) - Use for angel food cake, large roasts, turkey.
Figure 15: Rack Positions
Multiple Rack Cooking
Pan Placement
When using multiple racks, follow the placement recommendations below.
Two rack: Use rack positions 2 and 5.
Three rack: (for convection bake): Use positions 1,3 and 6. The rack in posi- tion 3 can be extension rack if desired.
Baking results are better if pans are placed in the center of the oven. If baking more than one pan on a rack, allow at least 1" to 1½" of air space around the pan. When baking four cake layers at the same time, stagger pans on two racks so that one pan is not directly above the other. To allow for best baking results stagger pans as shown in the graphic below.
English 25
GettingtheMostOutofYourAppliance
Pan placement on one rack
Pan placement on two racks
Figure 16: Pan Placement
Baking Pans
Preheating the Oven
The Probe (some models)
Here are some tips for cooking with baking pans:
Glass baking dishes absorb heat, therefore reduce oven temperature 25°F when baking in glass.
Shiny, smooth metal reflects heat resulting in lighter, more delicate browning.
Dark, rough or dull pans will absorb heat resulting in browner, crisper crust. Some manufacturers recommend reducing temperature 25° F when using these pans. Follow manufacturer recommendations.
Use glass or dark metal pans for pies.
Insulated baking pans may increase the recommended baking time.
Preheat the oven if the recipe recommends it. Preheating is necessary for good results when baking cakes, cookies, pastry and breads. Setting a higher tempera- ture does not shorten preheat time. Place oven racks in proper position before preheating. A beep will confirm that oven is preheated and selected oven temper- ature will be displayed.
Note: Preheating the oven is not recommended when using the probe (some models). A hot oven will impair your ability to easily connect the probe to the receptacle and to insert it into the meat.
The oven is well insulated and the retained heat will continue to cook the meat after the oven has shut off. For this reason, remove the meat from the oven as
soon as the control beeps.
Since meat continues to cook after being removed from the oven, set the internal (probe) temperature 5- 10 degrees below the desired final internal temperature (exception: poultry). Allow standing time (10 -20 minutes) before carving the meat.
Always use the handle of the probe for inserting and removing. Use a potholder to remove since the probe becomes hot.
Remove the probe from the oven when it is not being used.
The probe cannot be used with frozen meats. For best results, completely thaw meats before using the probe.
English 26
Inserting the Probe
For meats, insert the probe tip into the thickest part and do not touch bone, fat, or gristle.
For large poultry products and turkeys, insert the probe in the thickest part of the inner thigh.
For other foods, such as a meatloaf, the probe tip should be located in the center of the thickest part of the food.
Oven Cooking Modes
Getting the Most Out of Your Appliance
Bake, Proof and Warm
Baking is cooking with dry, heated air. Both the upper and lower element cycle to maintain the oven temperature. Bake mode can be used to prepare foods like pastries and casseroles as well as to
roast meats.
Note: Depending on the model, you may hear the convection fan while the oven is preheating for the
bake mode. This is normal.
In the Proofing mode, the oven will use the upper and lower element to maintain a low temperature to proof bread.
Proofing is the rising of a yeast dough.
The Proofing mode temperatures are 85° to 110° F. The default temperature is 100° F.
Loosely cover the bowl or pan and use any rack that accommodates the size of the container.
Keep the door closed and use the oven light to check the rising of the dough.
In Warming mode, the upper and lower elements maintain a low temperature in the oven cavity in order to keep food at serving temperature.
Use the Warming setting on the oven to keep foods hot until ready to serve.
Warming mode temperatures are 140° - 220° F. Default temperature is 170°.
Foods that must be kept moist should be covered with a lid or aluminum foil.
fF [[[[: ..........
Convection Bake
CAUTION
When using Warm mode, follow these guidelines:
Do not use the Warm Mode to heat cold food.
Be sure to maintain proper food temperature. The USDA recom- mends holding hot food at 140°F or warmer.
DO NOT warm food for longer than one hour.
Convection baking is similar to baking. Heat comes from the lower heating element and a
third element behind the backwall. The main dif- ference in convection baking is that the heat is
circulated throughout the oven by the convection fan.
The Convection Bake mode is well-suited for baking large quantities of food on multiple racks.
It can be used to prepare cookies, pies, cupcakes, pastries, breads, snack foods and appetizers among other items.
The benefits of Convection Baking include:
Slight decrease in cooking time Three rack cooking (more even browning) Higher Volume (yeast items rise higher) Ability to cook more items at once
For
Best Results:
Reduce recipe temperature by 25° F.Refer to Convection Baking chart. Place food in low-sided, uncovered pans such as cookie sheets without sides.
\?- !i-
................ ii i............J
English 27
GettingtheMostOutofYourAppliance
Center baking pans side to side on the oven rack
Automatic Convection Conversion
Table 4: Convection Baking Chart
Cake Cupcakes
Bundt Cake Angel Food
Pie 2 Crust, fresh, 9"
2 Crust, frozen fruit, 9"
Cookies Sugar
Chocolate Chip Brownie
Breads
Pizza Frozen
Yeast bread, loaf, 9x5 Yeast rolls
Quick bread, loaf, 8x4 Biscuits
Muffins
Fresh
In the convection bake mode, the temperature is automatically reduced 25° F from the package or recipe temperature. Simply enter the package or recipe tem- perature when setting the mode and the range calculates the correct temperature.
The Automatic Convection Conversion feature can be turned off to allow for man- ual temperature adjustment. See "Turn Automatic Convection Conversion ON or
OFF" on page 15 for details
When the Automatic Convection Conversion feature is activated, the display will read AUTO CONV BAKE. When the feature is turned off, it will read CONV BAKE.
3 2 1
2 2
3 3 3
2 3 2 3 3
3 3
350 17-19 350 37-43 350 35-39
375-425 45-55 375 68-78
350-475 6-11 350-375 8-13 350 29-36
375 18-22 375-400 12-15 350-375 45-55 375-400 11-15 425 15-19
400-450 23-26 425-450 12-15
a. This temperature must be manually reduced by 25° F if the Automatic Convection Conversion
feature has been turned off.
b. This chart is a guide. Actual times depend on the mixes or recipes baked. Follow recipe or
package directions.
Broiling uses intense heat radiated from the
Broil
upper element. The Broil mode is best suited to cooking thin, tender cuts of meat (1" or less), poultry and fish. It can also be used to brown breads and casseroles. Always broil with the
door closed.
The benefits of Broiling include:
Fast and efficient cooking Cooking without the addition of fats or liquids Browning as the food cooks
For
Best Results:
Preheat oven 3-4 minutes. Do not preheat for more than 5 minutes. Steaks and Chops should be at least 314"thick Brush fish and poultry with butter or oil to prevent sticking Use the broil pan and grid included with your range (some models). Do not cover the broiler grid with foil. It is designed to drain fats and oils away from the cooking surface to prevent smoking and spattering Turn meats once halfway through the recommended cooking time (see Broil Chart for examples).
J
English 28
Loading...
+ 113 hidden pages