Bosch HDD86051UC Specifications

36" Downdraft

800 Series Downdraft – HDD86051UC

HDD86051UC

Stainless Steel

Sleek, built-in, and retracts out of sight. Bosch 36" Downdraft's ﬂexible design seamlessly integrates into your kitchen

Features & Beneﬁts

Beautifully designed to preserve clean sight lines when not in use

Quiet at 1.4 sones* on low speed

Sleek front panel ﬁlter design acts as a guard against splatters

6 exhaust connections possible (transition sold separately)

Recirculation kit for sale for use in non ducted applications**

General Properties

Operating mode Convertible:

ducted / recirculating

Maximum CFM Blower sold

separately

Sones* 1.4 WS / 10.3 HS

Number of speed

3-stage

settings

Motor location External

Damper included No

Grease ﬁlter material Aluminum

Grease ﬁlter type Multilayer cassette

Duct direction Front, Left, Right,

Rear, Down

Optional blower required

Yes (600 CFM options sold separately)

Technical Details

Volts (V) 120 V

Frequency (Hz) 60 Hz

Plug type 120V-3 prong

Power cord length (in.) 30"

Dimensions & Weight

Overall appliance dimensions (width

29 3/8" x 37" x

2 3/4" of canopy included) (HxWxD) (in.)

Height of the rise (in.) 12"

Diameter of air duct (in.)

8" internal

Diameter of air duct (in.)

6" or 8" external

Net weight (lbs) 42 lbs

Accessories—Required

Blower (sold separately)

Accessories—Transitions & Blowers

6" side/rear/downward

HDDSTRAN6

transition

8" side/rear/downward

HDDSTRAN8

transition

NOTE: HDDSTRAN6 or HDDSTRAN8 required for side, rear or downward exhaust applications with inline and remote blowers.

6" round front plate HDDFTRAN6

8" round front plate HDDFTRAN8

NOTE: HDDFTRAN6 or HDDFTRAN8 required for front exhaust applications with inline and remote blowers.

Transition for

HDDSTRAN2

rectangular duct

2' rectangular duct HDD2RECTD

NOTE: HDDSTRAN2 needed to attach HDD2RECTD to downdraft. For use with installation of inline or remote blower applications.

600 CFM ﬂexible blower DHG602DUC

600 CFM inline blower DHG6015NUC

600 CFM remote blower DHG6023RUC

Accessories—Optional

Recirculation kit HDDREC5UC

Charcoal ﬁlter

HDDFILTUC replacement for recirculation kit

36" Gas Cooktop Seal Kit

HDD6RSP for Downdraft (Required For Installation With Gas Cooktops)

Trim Kit for 36"

HDDTRIM36S FlameSelect® Gas Cooktops

*Sound test performed as per HVI standards at independent lab. * *Recirculation kit (sold separately) is compatible with electric, induction and FlameSelect Gas cooktops only.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST). Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and speciﬁcations, at any time, without

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty. For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

36" Downdraft

800 Series Downdraft – HDD86051UC

Installation Details

PRODUCT

CLEARANCES

Downdraft electrical cable is 30" long

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty. For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

36" Downdraft

800 Series Downdraft – HDD86051UC

Installation Details – Cutouts

GAS

Template

2-1/8" (54)

24-11/16" (628)

Downdraft cutout width: 30" (762) is 27-1/16" (687) 36" (914) is 33-1/16" (840)

MIN.

1/2" (13)

1-7/8" (48)

ELECTRIC AND INDUCTION

Downdraft cutout width: 30" (762) is 27-1/16" (687) 36" (914) is 33-1/16" (840)

Template

2-1/8" (54)

22-5/16" (567)

19-1/8" (486)

1-1/16"

(27)

Cooktop cutout width

25-7/16" - 25-9/16"

(646 - 649)

22-11/16" - 22-13/16"

(576 - 579)

19-7/8" - 20"

(505 - 508)

11/16"

(17)

MIN.

1/2" (13)

2-1/4" (57)

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty. For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

Cooktop cutout width

36" Downdraft

800 Series Downdraft – HDD86051UC

Accessories – Transitions

SIDE/REAR TRANSITIONS FOR DOWNDRAFT ROUND FRONT PLATES FOR DOWNDRAFT

HDDSTRAN6

6" Side/Rear/ Downward Transition for Downdraft

6" Round transition enable ducting to be at sides, rear or below downdraft for ﬂexible conﬁgurations to maximize your kitchen design

Flexible transition design allows for left,

right, rear or downward venting

Front rough-in plate may be used with a

6" round duct or elbow

Ability to use with DHG6015NUC inline or

DHG6023RUC remote blowers

Some blower positions may need deeper

cabinets. See installation guide

HDDFTRAN6

6" Round Front Plate for Downdraft

6" Front rough-in plate enable ducting to be at front of downdraft, for use with inline and remote blower applications

Front rough-in plate design allows for front

venting

Front rough-in plate may be used with a 6"

round duct or elbow

Ability to use with DHG6015NUC inline or

DHG6023RUC remote blowers

8" Round transition enable ducting to be at sides, rear or below downdraft for ﬂexible conﬁgurations to maximize your kitchen design

Flexible transition design allows for left,

right, rear or downward venting

HDDSTRAN8

8" Side/Rear/ Downward Transition for Downdraft

NOTE: HDDSTRAN6 or HDDSTRAN8 side/rear/downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

For DHG602DUC ﬂexible downdraft blower

used as inline installation

Some blower positions may need deeper

cabinets. See installation guide

8" Front rough-in plate enable ducting to be at front of downdraft, for use with inline and remote blower applications

Front rough-in plate design allows for front

venting

HDDFTRAN8

8" Round Front Plate for Downdraft

NOTE: HDDFTRAN6 or HDDFTRAN8 front plate required for front exhaust applications with inline and remote blowers.

Front rough-in plate may be used with a 8"

round duct or elbow

For DHG602DUC ﬂexible downdraft blower

used as inline installation

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty. For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

36" Downdraft

800 Series Downdraft – HDD86051UC

Accessories – Transitions

TRANSITION FOR RECTANGULAR DUCT FOR DOWNDRAFT 2' RECTANGULAR DUCT FOR DOWNDRAFT

2' Rectangular duct can be used as extension to exhaust through a cabinet or wall while maximizing cabinet storage space

Duct can be used as an extension to

exhaust through a cabinet or wall

May be attached to sides or rear of

downdraft housing

HDDRECTRN transition needed to connect

HDD2RECTD to downdraft housing

For use with remote or inline blowers

HDDSTRAN2

Transition for Rectangular Duct for Downdraft

Rectangular duct transition required to connect 2’ rectangular duct to downdraft

HDD2RECTD

2' Rectangular Duct Downdraft

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty. For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

+ 9 hidden pages