Bosch 303-435 Original Instructions Manual
Engine Stand
303-435
en Original Instructions
en | 2 | 303-435
1 General Information
Product Name: Engine Stand
Product Type: Mounting Device
Product Number: 303-435
Weight: 65 kg
Maximum Load
Capacity:
Dimensions: Length: 983 mmm
Available Accessories:
Product Number: Product Name:
205-172 Rear Axle Mounting Bracket
205-398 Mounting Bracket
303-059 Universal Spindle
303-1473 Engine Support Accessory
303-242 Holding Screws
303-435-01 Engine Bracket
303-435-02 Engine Mounting Bracket
303-435-03 Adapter
303-435-04 Engine Bracket
303-435-05 Engine Bracket
303-435-06 Mounting Bracket
303-435-07 Engine Bracket
303-435-08 Spacer
303-435-09 Adapter Plate
303-435-10 Mounting Plate
303-435-11B Mounting Plate
303-435-12B Mounting Plate
303-435-13C Mounting Plate
303-435-14B Mounting Plate
307-029 Mounting Bracket
307-111 Mounting Bracket
307-112 Adapter Bar
307-200 Mounting Bracket
308-014 Mounting Bracket
308-014-01 Adapter Bracket
308-042A Mounting Bracket
308-114 Mounting Bracket
308-114-01 Adapter Bracket
308-148 Mounting Bracket
308-193 Mounting Plate
300 kg
Width: 905 mm
Height: 1051 mm
Intended Use:
To support engines or other vehicle parts for service,
maintenance, and installation work.
Terms of Use:
To be used only by qualified personnel trained in
accordance with Ford standards.
Use only for work expressly approved by Ford.
Use only for loads up to 300 kg.
Use only the accessories listed in the Available
Accessories table. Use these accessories only with
this engine stand.
Use only with a suitable lifting device equipped with
a sufficient load capacity.
Use only on level ground.
Use and store only in enclosed workshops with a
roof.
To be used by only one person alone.
Figure 1: Engine Stand 303-435
A Frame
B Universal Spindle
C Grease Fitting
D Gear Unit with Hand Wheel and Locking Mechanism
E Castor Wheels, Lockable
F Castor Wheels
12/2015 Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Loading...