Borotto SIRIO Instruction Manual

0 (0)
Page 1 of 12 Rev 03
Instructions manual for the automatic humidifier SIRIO
1 – Warnings for safe utilisation
When using electrical appliances it is always required to adhere to some basic safety precautions, including the following:
1. READ THE INSTRUCTIONS IN THEIR ENTIRETY.
manual.
3. Do not place the unit close to heat sources and do not cover it with other objects.
4. Do not leave the appliance unattended for long periods of time when it is connected to the power mains. Do not use the
appliance with damaged cables or plugs, or appliances that have been dropped to the ground or damaged in some way. Consign the appliance to the nearest authorised service centre requesting its inspection, or repair.
5. Use of accessories not recommended or not sold by the manufacturer is forbidden.
6. Do not use outdoors.
7. The appliance can be used by children under 12 years of age and/or persons with reduced physical or mental capacity, or
without experience or the necessary knowledge, as long as supervised by an adult or after they have received instructions related to safe appliance use and understand the dangers related to it. The same is true for cleaning and maintenance.
8. Always start use by verifying the feeder conditions, therefore connect it to the power outlet. To remove it, detach it from
the power outlet.
9. Disconnect the feeder from the power outlet when the appliance is not running.
10. The feeder must be placed so it is easy to access when it is necessary to disconnect it from the power mains.
11. To disconnect the feeder, grab it directly (not the cable) and detach it from the wall outlet.
12. Any modification to this product that has not been expressly authorised by the manufacturer, besides representing a
safety risk, will void the warranty.
13. STORE THESE INSTRUCTIONS WITH CARE.
Translation of original instructions
Page 2 of 12 Rev 03
Contents
1 – Warnings for safe utilisation ..................................................................................................................................... 1
2 - Declaration of conformity .......................................................................................................................................... 3
3 - Identification plate ................................................................................................................................................... 4
4 – Presentation of the manual ...................................................................................................................................... 5
5 – Technical features and specifications ........................................................................................................................ 5
6 - SIRIO preparation and commissioning ....................................................................................................................... 6
6.1 SIRIO positioning ................................................................................................................................................... 6
6.2 Valve positioning ................................................................................................................................................... 7
6.3 Sensor positioning ................................................................................................................................................ 7
7– Using SIRIO during incubation ............................................................................................................................ 9
8 – Using SIRIO during hatching ............................................................................................................................ 10
9- Humidity parameters for incubation................................................................................................................. 10
10– Using SIRIO with other brand incubators ...................................................................................................... 11
11- SIRIO maintenance and cleaning ............................................................................................................................ 11
12 - Disposal .................................................................................................................................................................. 11
13 – Warranty / after sale service ................................................................................................................................. 12
Electronic format copy of this instructions manual can be downloaded from the site www.borotto.com or can be requested by writing to the e-mail address info@borotto.com, specifying the product and the manual revision.
Page 3 of 12 Rev 03
2 - Declaration of conformity
EU Declaration of conformity
The undersigned Andrea Borotto, as legal representative of the company BOROTTO® with headquarters in Via Papa Giovanni Paolo II, 7 37060 Buttapietra (VR) Italy VAT No. 03787910235
DECLARES
That the product as per the label shown below:
Is intended for use as an accessory for maintaining humidity in incubators for animal eggs, specifically: hen, pheasant, turkey, guinea fowl, quail, grey partridge, partridge, goose, muscovy/common/wild duck, peacock, rock partridge, pigeon, Virginia quail, exotic birds and birds of prey.
The following declaration of conformity is issued under the manufacturer’s exclusive responsibility.
And it conforms to the following directives:
Directive EN 61326 – 1: 2007
Directive EN 61010 – 1:2010
Directive EN 61000 – 3– 2 :2014
Directive EN 61000 – 3– 3 :2013
Directive EN 61326 – 1 :2013
The person responsible for the
technical dossier and legal
representative
Buttapietra – VR - Italy 01/07/2016 BOROTTO ANDREA
Page 4 of 12 Rev 03
Attention, prior to performing any operation, carefully read the
instructions manual.
Warning symbols used on the product and in this manual
Symbol
Description
Obligation to read the operating instructions before using the product
DC Direct Current power supply
Positive polarity at the centre of the power supply connector
.
3 - Identification plate
The equipment is fitted with an identification plate showing the equipment's identification details and the main
technical specifications.
SIRIO automatic humidifier
Year: XXXX Code: SIRIO Portata 0-5 l/h (ca) Bar: 0,2 Serial Number: XXXX Weight Kg 0,435 Classe II Imput voltage: 12 V DC MAX Power: 4W Made in Italy
BOROTTO Via Papa Giovanni Paolo II, 7A 37060 Buttapietra (VR) Italy
Loading...
+ 8 hidden pages