PATRIOT
Ｍ１２
LA type soldering iron controller
Instruction manual
Date prepared: April 2018
The 9th edition
JAPAN BONKOTE CO., LTD.
ＰＡＴＲＩＯＴ
Contents page
１ Preface ············································································································ １
２ Notes for safety ································································································ １
３ Auto Tuning before use ····················································································· １
４ Notes for installation and use ············································································ ２
５ How to use M12 controller
(Ａ) Contents ································································································· ３
(Ｂ) Name of the body ····················································································· ３
(Ｃ) How to assemble ······················································································ ４
(Ｄ) How to use ······························································································ ５
６ Optional function
(Ａ) Alarm function upper limit setting ····························································· ７
(Ｂ) Alarm function lower limit setting ······························································ ８
(Ｃ) Temperature recovery speed setting ··························································· ８
(Ｄ) Upper limit setting of set temperature ························································ ８
(Ｅ) Indication of manipulated output value ······················································ ９
(Ｆ) Lock function ··························································································· ９
(Ｇ) Anti reset wind up setting ··································································· １０
(Ｈ) Auto Power Down / Auto Power Off setting ·············································· １０
(Ｉ) PID value manual setting ······································································ １３
７ List of character ···························································································· １５
８ How to maintenance ······················································································ １６
９ Standard specification ···················································································· １６
10 Guarantee and After sales service
(Ａ) Trouble shooting ··················································································· １７
(Ｂ) Guarantee ···························································································· １７
(Ｃ) After sales service ················································································· １７
１
1. Preface
Thank you very much for purchasing M12 CONTROLLER.
Please read this Notes for safety before use, and use this machine properly.
After read this manual, please keep it.
2. Notes for safety
Be sure to read this manual before using this machine.
Never touch the power cord and the soldering iron with dump hands.
Otherwise, you may get hurt due to electric shock and etc. (death at worse)
Never dampen the iron tip with water or other liquid. Otherwise, burst cord
may cause fire, malfunction, electric shock and etc. (death at worse)
Take great care to handle the soldering iron while it is not rested on the
workbench. Otherwise, the heated tip may cause fire or adjacent operations
may get hurt.
Unplug the iron unit and allow sufficient time for it to cool when replacement
or maintenance.
Do not overhaul the machine when the machine has trouble. Otherwise, it may
cause malfunction, electric shock and etc. (death at worse) Contact our
customer service department and follow instructions to make maintenance.
Be sure to use proper replacement parts such as fuse, checking capabilities.
Otherwise, parts with wrong capacities may cause fire, malfunction and tec.
3. Auto Tuning before use
We would recommend Auto Tuning before use, although each parameter is set in
the standard value at the shipment. By doing so, soldering irons will perform with
good effect according to iron tip temperature, shape of iron tip, working
environments and so on.
※ This function will be set automatically by keypad. (Please refer to P.7)
！
CAUTION
２
4. Notes for installation and use
This machine is designed with earth specification. Make sure to use an earth
equipped receptacle. If you do not have such receptacle, install an earth
separately.
Use this machine on a neat bench on which a conducive mat is put.
Do not place where the machine would be exposed too much moisture, direct
sunshine, much dust and vibration.
In order to prevent static electricity, we recommend that you use a static
electricity removal device, wrist strap etc.
Odor is generated due to the use of solder and flux. Be sure to ventilate work
places. e.g. Install a ventilation fan etc.
Be sure to pull out the power plug when the machine is not used.
Be sure to grab the power plug instead of the cord, when plugging and
unplugging.
When change power voltage from 100V to 220V for example, make sure to
confirm the specifications of the soldering iron before use.
Please keep flammable objects away from this machine.
Be sure to check the slack of each screw and tighten them securely before use
this machine.
Do not use this machine for purpose other than the original purpose.
３
5. How to use
5-A：Contents of soldering station set
① 3P Power cord ※
② M12 Controller
③ BON-11 Iron stand
④ TB-170J Soldering iron
NOTE:
This picture is M12-TB-170J station set.
※ 3PCHI plug cord for 100V, or 3EPV plug
cord for 220V comes with a controller.
5-B：Name of the body
《 FRONT 》 《 BACK 》
① Power switch ⑨ Fuse holder
② 5 pin connector ⑩ 3 pin inlet
③ PV display (working temperature)
④ SV display (setting temperature)
⑤ △ key (value up)
⑥ ▽ key (value down)
⑦
⑧ □ key (speed setting)
②
③ ④ ①
⑤ ⑥ ⑧
⑦ ⑨ ⑩
① ② ③
④
４
5-C：How to assemble
① Insert the power cord into the 3 pin inlet at the back face.
② Connect the soldering iron to 5 pin connector at the front, and turn the connector housing
clockwise to lock it in place.
③ Assemble the iron stand and store the soldering iron in its holder ①.
１
２
３
５
６
４
No.
Name
Model No.
１
Holder
B-11
２
Cover
－
３
Screw with springwasher
M4 x 6
４
Cleaner case
K-5
５
Cleaner base
－
６
Cleaning sponge
S-6
Assemble order
Ⅰ：Remove the screw ③ from the cleaner base ⑤.
Ⅱ：Align a screw hole of the holder ① and the cleaner base ⑤, then tighten the screw.
Iron stand BON-14 is for TB-1175 iron,
BON-3 is for TB-1100.
①
②
ＢＯＮ-１４ ＢＯＮ-３
Loading...