Bolide iPac Setup Manual

QUICK IP CAMERA SETUP GUIDE

START HERE

IMPORTANT:

Check power and
voltage to prevent
damage. Please use
only 12VDC 1000mA
or POE to power the
camera. In order to program
the IP camera, you need a computer con­nected to the same network as the camera.

!

EASY SETUP STEP 1 - 2 - 3

Plug in the power to the camera 12VDC or POE.

1

Plug in the Ethernet cable to the camera.

3

Connection Diagram

Local Network Video Management Software

Internet / WAN

Modem/Router

Modem/Router

LAN / Local Area Network

LAN / Local Area Network

Open Internet Explorer, type in the default IP address in
the address bar:
http://192.168.0.120
Login: admin
Password: admin
For additional IP cameras, simply assign different IP once
you have logged on.

Remote Network Video Management Software

Modem/Router

LAN / Local Area Network

OR

POE

2

Plug in the cable to a network hub
and connect to your computer.

Need More Help?

For information about features, please refer to the user manual for example settings and denitions. Additional product information can also

be found in the Product Manual on the CD. Please feel free to give us a call or simply log on to http://www.bolideco.com for more information
and support.

*If you encounter IE Active X error, please go to internet
options > enable all Active X control under security set­tings. Please also make sure your computer is set to the
same network mask.

Bolide Technology Group

is a ISO 9001:2008 Certied Corporation