Bogen WB8 User Manual
Features
Grilles & Baffles
GRILLES
• Available in aluminum, bright white,
or off-white finish
• Protects and conceals 8" speakers
• Constructed of metal or aluminum
WALL BAFFLE
• Constructed of 3/8" particle board with
reinforced corners
• Sloping front panel (13.5 degrees) provides
enhanced downward dispersion
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-7777-11C 1210
Description
Bogen metal grilles protect and conceal recessed 8" ceiling speakers. They are shipped complete with
the hardware needed to mount a speaker to the grille.
Bogenʼs Wall Baffle, WB8, will house any Bogen 8" speaker. Hardware for mounting a speaker to the
baffle included.
WB8
Technical
Specifications
* Mounting hardware included ‡ Features hidden speaker mounting studs
SG8W
PG8W
PG8U
Note: Colors of speakers shown may not be accurate and should not be used for reference purposes.
PG8U
PG8W
SG8W
WB8
Steel
3/8'' Particle
Board
Low
Profile
Low Profile‡
20/carton
10/carton
4 /carton
26 lb.
14 lb.
10 lb.
13'' Dia.
Bright-white Enamel
Off-white Enamel
Bright-white Enamel
Simulated Walnut
9-1/2'' W x 9-1/2'' H X 5-1/4'' D
X 3-1/4'' D (at bottom)
Material
Finish
Style
Quantity
Shipping
Weight
(carton)
Dimensions
Models*
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Ceiling Grilles
(Use for PG8U) The ceiling speaker grille shall be a Bogen model PG8U steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.
(Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in off-white semi-gloss enamel. Mounting hardware shall be included.
(Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13",
the speaker mounting studs shall be hidden, and the grille shall be low profile and finished in bright white
semi-gloss enamel. Mounting hardware shall be included.
WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing
an 8" cone-type loudspeaker and angled (13.5 degrees) for additional downward sound dispersion. The baffle
shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be
used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware
for mounting the speaker to the baffle shall be supplied. Overall dimensions shall be 9-1/2" W x 9-1/2" H x
5-1/4" D (top) x 3-1/4" D (bottom).
Architect
and Engineer
Specifications
Loading...