Bogen V100, V150, V250 Specifications
• 5 models ranging from 35W to 250W with a large
power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing
plug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the
output level of the power amplifier with Peak and
Average meter switch
• Motorized master volume control that can be
remotely operated
• Bass and treble controls
• Two-color LED for each channel indicates input
active/clipping
• Lockable switch permits user to select either transformer-coupled outputs or a direct low-impedance
output
• 5-position barrier strip, with clamping washers, provides connections for speaker loads
• Master mute function overrides all audio from the
mixer section of the amplifier
• Screw terminal for master mute and remote volume
control functions
• Each of the 8 module bays has an associated independent volume control
• Bass and treble control bypass switch (located in
module bay 6)
• 125 Hz Lo-cut feature (switch located in module
bay 6)
• Signal processing insert jacks allow external equipment to be inserted between the pre-amp output
and the power amp input
• Pre-EQ unbalanced buffer output signal “post” all
unit controls, but “pre” any external signal processing equipment connected
• Grounded, unswitched AC convenience receptacle
with a 500W maximum capacity provided for external equipment
• Remote volume control panel (RVCP) (sold separately)
• Security cover to protect volume, bass, and treble
controls (PVSC) (sold separately)
• Rack mountable (rack mounting kit RPK87 sold separately)
• 2 rack spaces high (3-1/2")
Features
Description
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
Part No. 54-8013-01R2 elec Printed in U.S.A. 0210
Power Vector
Modular
Amplifiers
Models V35,V60,
V100,V150, and V250
Bogen's Power Vector modular amplifiers offer a wide range of power from which to choose from, with five
models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low(4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows up to four levels of priority
between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each
module is controlled by an independent volume control with an associated signal/clip LED for signal status. An
11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control
panel (RVCP, sold separately).
The amplifier shall be a Bogen Power Vector Amplifier,
Model V35,V60,V100,V150 or V250.The amplifier shall be
compatible with both high- (70/25V) and low- (4/8-ohm)
impedance speakers, with the capability of 35, 60, 100, 150,
or 250 watts, respectively.
The amplifier shall provide 8 module bays for plug-in input
modules with two of the bays also capable of handling plugin signal processing output modules.There shall be 4 levels
of priority between modules.
Each of the 8 module bays shall have an associated independent volume control. Each independent volume control
shall have a signal/clip LED to indicate if a clipping condition
is occuring. Each amplifier shall also include bass and treble
controls, as well as a motorized master volume control,
which can be remotely operated using the RVCP accessory (sold separately).
Two screw terminals shall be provided for invoking a master mute function that will interrupt all audio from the
mixer section of the Power Vector amplifier.
An 11 -segment LED output level meter will register either
the average or peak level of the amplifier’s output level,
determined by an Average/Peak switch. Each Power Vector
amplifier shall have a Tone Control Bypass switch and a
Low-Cut Filter switch located on the rear of the amplifier
in module bay 6.
A lockable switch will permit the selection of transformercoupled output or direct output for speaker runs. Master
mute and remote volume control functions are controlled
using a screw terminal.
Signal processing insert jacks (RCA connectors) will allow
external equipment to be inserted between the pre-amp
output and the power amp input.
Each model will have a Pre-EQ unbalanced (RCA jack)
buffer output whose signal is post all volume controls,tone
controls, and output module signal processing, but before
(pre-EQ) any external signal processing equipment connected to the Signal Processing Insert jacks.
Each amplifier will include a 500W maximum, unswitched
AC power receptacle.
The amplifier shall fit into a 19" rack and fit in two rack
spaces. It shall allow the attachment of feet for tabletop
placement.Each model shall measure 17" W x 3-1/2" H
x 13-1/2" D.The V35 shall weigh 24 lb., the V60 - 28 lb., the
V100 - 32 lb., the V150 - 35 lb., and the V250 - 40 lb.
Architect and
Engineer
Specifications
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
201-934-8500 FAX: 201-934-9832
Web Site: www.bogen.com
Power Output (RMS): V35 V60 V100 V150 V250
Rated: 35W 60W 100W 150W 250W
Typical @ 1 kHz:* 45W 85W 140W 200W 340W
Frequency Response
Transformer: 45-20 kHz; 0/-2 dB
Direct: 20-20 kHz; 0/-1 dB
Distortion
Transformer: 0.5%**
Direct: 0.1%** (.05 typical @ 1 kHz)
Signal-to-Noise
†
Fundamental: -94 dB
With Aux Module: -70 dB
With Mic Module: -60 dB
With Tel Module: -70 dB
Tone Controls
Bass Frequency: 100 Hz (+/- 10 dB minimum)
Treble Frequency: 10 kHz (+/- 10 dB minimum)
Low Cut Frequency: 125 Hz @ -6 dB/octave
Sensitivity 0.4V (at module bay connector)
Output Regulation: 2 dB or better, no load to full load
Output Impedance
Transformer-Coupled: 70V, 25V, 8 ohms (bal or unbal)
Direct Coupled: 4 ohms
Inserts
Insert "OUT" Level: 1VRMS (@FRP)
Insert "OUT" Impedance: 50 ohms maximum
Insert "IN" Sensitivity: 1VRMS
Insert "IN" Impedance: 10k ohms minimum
Pre-EQ Output
Output Level: 4VRMS (@FRP)
Output Impedance: 50 ohms maximum
AC Power Receptacle: 500 watts maximum power, unswitched
AC Voltage: 120V AC, 60Hz
AC Current: V35 V60 V100 V150 V250
0.6A 1.3A 2.0A 3.5A 5.5A
Product Weight (lb.): V35 V60 V100 V150 V250
24 28 32 35 40
Dimensions: 16-1/2" W x 3-1/2" H x 12" D
(all models)
Technical
Specifications
* Typical, @1 kHz/0.1% THD/4Ω)
** THD+N, Maximum, Full bandwidth @ FRP
† Referenced to FRP output level, 20-20 kHz bandwidth limited.
Loading...