Bogen UHFADS User's Guide

Model

2

3

1

+12V 1A x 2

CASCADE CASCADE

4

8

5

7

9

6

10

11

12

OFF

ON

+12V 1A x 2

4

UHFADS

ANTENNA DISTRIBUTION SYSTEM

USER MANUAL

The Bogen UHFADS is a full range UHF antenna splitter that routes antenna signals from a pair of antenna to several wireless
receivers within a multi-channel system.

The UHFADS also amplies the RF signals to compensate for the losses incurred from splitting the signal. Built-in DC power
distribution provides four (4) 12V DC outputs for receivers. A single UHFADS unit can support up to four (4) wireless receivers,
while multiple UHFADS units can be cascaded to handle even more receivers.

System Components:

• BNC Patch Cables (10 pieces)

• BNCF/F Panel Adapters (2 pieces)

• DC Patch Cables (4 pieces)

• DC Power Supply (1 piece)

Features:

1

Antenna A Adapter

2

Power On/Off switch

3

Antenna B Adapter

4

DC Output

Antenna A IN

5

6

Cascade A Output

7

Antenna A Output

8

Power Supply Input Jack

9

Antenna B Output

10

Cascade B Output

11

Antenna B IN

12

Antenna Booster 12 V DC Power ON/OFF Switch
for Antenna A and Antenna B .

6

1

11

Factory Default is set to ON.
Requires removal of top cover to access.

Specications:

Frequency Output...................470-960 MHz

RF Output Level (Gain)...............3dB (± 2dB)

Cascade Output Level.. . . . . . . . .. . . . . . . 0dB ~ 2dB

Output Connection Isolation........ . . . . . . . . ≥25dB

Third Order Intercept Point........ . . . . . . . . .24dbm

Impedance..................................50-ohm

Power Consumption...........................60W

Power (External Power Supply) . .... 12 VDC/5A

Output DC Voltage .......... . . . . . . 12 VDC/1A x 4

Antenna Booster DC Voltage...12 V (defeatable)

Dimensions .. . . ........... 19” W x 1.7” H x 9.8” D

(standard 19” and 1U case)

Weight .........................................2.2 lb.

FRONT VIEW

REAR VIEW

CASCADE CASCADE

+12V 1A x 2

4

5

6

12

OFF

2

+12V 1A x 2

8

7

9

10

4

11

3

ON

www.bogen.com

©2018 Bogen Communications, Inc.

Specifications are subject to change.

740-00079A 1810

Connections:

R1 R2

R3

Master

R4

Cascade 1

Cascade 2

Cascade 3

UHFASA

R1

12-18V/500mA

R3

12-18V/500mA

DCV INPUT

DCV INPUT

100-240VAC~
50/60Hz, 2A
FUSE: T3.15A/250V

AF OUTPUT

AF OUTPUT

100-240VAC~
50/60Hz, 2A
FUSE: T3.15A/250V

OR

UNBAL .

UNBAL .

UHFUDA

+12V 1A x 2

UHFADS

UHFADS

CASCADE CASCADE

(Front View)

Master

Master (Rear View)

UHFUDA

A2A1 A3 A4 B4 B3 B2 B1

AF OUTPUT
BALANCED

Freq. Range:

A1 B1 A2 B2

Serial No.:

AF OUTPUT
BALANCED

Freq. Range:

A3 B3 A4 B4

Serial No.:

UDR8011

CASCADE CASCADE

+12V 1A x 2

Additional UHFADS/UDR8011 systems

ANT. 1ANT. 2

ANT. 1ANT. 2

Wireless Receivers (Rear View)

UHFADS

will patch the same as above

Cascade1

DCV INPUT

12-18V/500mA

DCV INPUT

12-18V/500mA

AF OUTPUT

UNBAL .

AF OUTPUT

UNBAL .

(Rear View)

AF OUTPUT
BALANCED

AF OUTPUT
BALANCED

Freq. Range:

Serial No.:

Freq. Range:

Serial No.:

OR

+12V 1A x 2

+12V 1A x 2

UHFASA

R2

ANT. 1ANT. 2

R4

ANT. 1ANT. 2

Limited Warranty: Exclusion of Certain Damages

The Bogen UHFADS Antenna Distribution System is warranted to be free from defects in material and workmanship for one (1) year from the date of sale to the original purchaser.

Any part of the product covered by this warranty that, with normal installation and use, becomes defective (as conrmed by Bogen upon inspection) during the applicable

warranty period will be repaired or replaced by Bogen, at Bogen’s option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department,
4570 Shelby Air Drive, Suite 11, Memphis, TN 38118 USA. Repaired or replacement product(s) will be returned to you freight prepaid. This warranty does not extend to any
of our products that have been subjected to abuse misuse, improper storage, neglect, accident, improper installation or have been modied or repaired or altered in any manner

whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO
OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale or supplying of products or

their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE

MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow

the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also

have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department– same address as above or call 201-934-8500. Returned products which do not qualify for

warranty service, may be repaired or replaced at Bogen’s option with previously repaired or refurbished items. The parts and labor involved in these repairs are warranted for 90 days when

repaired by the Bogen Factory Service Department. All parts and labor charges as well as shipping charges will be at the owner’s expense.

All returns require a Return Authorization number. For most efcient warranty or repair service, please include a description of the failure.

10/2018