Bogen CSD2X2LU Specifications

CEILING GRID

SUPPORT RAIL

CROSSBAR INCLUDED

(2 ft. X 4ft. CEILING GRID ONLY)

CEILING TILE

(CUT IN HALF, OR NO MORE

THAN 23-3/4")

2 ft. X 2ft.

TILE SPACE

2 ft. X 4ft.

TILE SPACE

Low-Impedance Drop-In Ceiling Speaker

with Back Can

CSD2X2L

(

)

Bogen’s CSD2X2L(U) Drop-In Ceiling Speakers are 8- ohm, full-range speakers that allow for fast and easy installation, which saves installation time, effort, and cost.

The CSD2X2L(U) is a 2' x 2' speaker that fits perfectly into place in 2' x 2' ceiling grids – without needing to cut ceiling tiles or requiring the use of tile support rails. The CSD2X2L(U) can also be easily installed in 2' x 4' ceiling grids – just make one cut to the ceiling tile, position the support rail (included), and drop the speaker into place.

• Finely perforated grille over the entire front of speaker

• Fully enclosed, industrial grade steel construction

• Enclosed Back Can

• 8'' main cone with secondary high-frequency cone

• Low-Impedance: 8-ohm speaker, 15W max. power

• Seismic attachment points

• Complies with Requirements of UL-2043

• Support Rail Crossbar (included)

• Available in Off-white and Bright White ("U" versions)

grille finish

CSD2X2L(U

)

CSD2X2L(U

)

Frequency Response . . . . . . . . . . 85 Hz - 20 kHz

SPL @ 1W / 1m . . . . . . . . . . . . . . . 94 dB

Maximum Power . . . . . . . . . . . . . . 15 watts @ 8-ohm

Dispersion @ 2 kHz

(6 dB down) . . . . . . . . . . . . . . . . . .100°

Cone Material & Surround . . . . . . Treated paper

Cones . . . . . . . . . . . . . . . . . . . . . . .

8" main cone with secondary

high frequency cone

Magnet Weight . . . . . . . . . . . . . . . .10 oz.

Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)

Dimensions . . . . . . . . . . . . . . . . . .23-13/16" W x 5" H x 23 -13/16" D

Product Weight . . . . . . . . . . . . . . .12 lb.

Plenum-Rated, complies with Requirements of Standard UL-2043.

The speaker shall be a Bogen Model CSD2X2L(U) Low-Impedance Drop-In Ceiling Speaker, which shall be fully enclosed and constructed of industrial grade steel. It shall be comprised of a damped high-compliance factory-mounted 8" loudspeaker that shall consist of an 8" treated paper main cone, a secondary high frequency cone, and a 10 ounce magnet. The unit shall have an 8-ohm nominal impedance with maximum power of 15 watts. Output shall be 94 dB @ 1 watt / 1 meter (min.). Frequency response shall be 85 Hz - 20 kHz (min.). The speaker shall include 4 seismic attachment points. The speaker shall have a non-reflective, Off-white or Bright White ("U" versions) metal finish grille.

The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tiles. For 2' x 2' installations, a support rail shall not be needed and no cuts to the ceiling shall be necessary. For 2' x 4' installations, a single cut to the ceiling tile and an included support rail shall be needed. The speaker shall measure 23-13/16" W x 5" H x 23-13/16" D and weigh 12 lb.

SPECIFICATIONS

Architect and Engineer Specifications

50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel: 201-934-8500 • Fax: 201-934-9832

www.bogen.com

Specifications subject to change without notice.

54-9283-01B 0902

—

FINELY PERFORATED

METAL FINISH GRILLE

Low-Impedance Drop-In Ceiling Speaker CSD2X2L(U

)

SUPPORT RAIL

CROSSBAR INCLUDED

(FOR USE WITHIN 2' X 4' TILE SPACE ONLY)

SEISMIC

ATTACHMENT

POINTS (4X)

Lead Color

Red

—

Black

WIRE NUTS

COVER

WIRE NUTS

COVER