Bogen AFI-2s2 Specsheet

Driver Complement:
Low Frequency: Dual Apogee 8"(203mm) permanent magnet cone- type drivers are treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
High Frequency
: One Apogee 1.4" (35.6mm) voice coil, 1.0" (25.4mm) exit horn-loaded compression driver thermally cooled with Ferrofluid
Input Connectors:
Barrier strip, screw type #8
Compatible Processors:
AFI Main Frame Controller Chassis (using AFI-2 Module) or DLC24
Handles:
Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Grille:
Highly durable, quality finish on perforated steel (aluminum on SX version)
Rigging Hardware:
Yok e: Two rigging points, one on top and one on bottom, to accept a yoke; points are backed with 16-gauge steel and can be type 3/8" – 16 or M10 thread OmniMount
®
: Bolt pattern on back panel accepts 60.0 series mount
Finish:
Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type:
20° trapezoidal, optimally-vented bass
Cabinet Construction:
Multi-ply hardwood with stainless steel fasteners
Options/Accessories:
• AFI Controller Processor or DLC24 Digital Processor
• SX weather treatment for use in limited exposure enclosures
• Assorted rigging components
Contractor Series
Loudspeaker System
Engineering Data:
Description:
Format:
Passive/Two-way
Dispersion:
H: 75° x V: 60° (rotatable)
Frequency Response (1m on axis):
66 Hz to 15.5 kHz ± 3 dB
Max. SPL (@1m):
120 dB cont./126 dB peak
PTML (peak transient mechanical limit):
135 dB
Sensitivity (1W @ 1m):
96 dB
Nominal Impedance:
16 ohms
Max. Power Handling:
225W cont./900W peak
Dimensions:
front: 9.7"(247mm) W x 26.4"(671mm) H rear: 5.8"(148mm) W x 26.4"(671mm) H depth: 12.7"(323mm)
Weight:
36 lb. (16.3 kg)
The AFI-2s2, with its carefully arranged woofers, extends vertical pattern control down to 500 Hz making it ideal for smaller spaces with poor acoustics. It is well suited for use as the main speaker in mid-sized houses of worship, auditoriums, and meeting rooms. With 120dB max SPL, the AFI-2s2 is powerful enough for bars and small clubs.
AFI-2s2
©2006 Bogen Communications, Inc. 1710
Specifications subject to change without notice. 55-0063-01E
Polar Measurements AFI-2s2 (6 dB/division, normalized)
Frequency Response AFI-2s2
Measured in a free-field anechoic environment using a swept one-third octave input.
All polar measurements ob tained in a free-
field environment at 10° in cre ments.
Dimensional Drawings AFI-2s2 (dimensions in inches and millimeters)
Processor Notes:
The AFI Controller consists of an analog Main Frame which accepts four voicing modules. Modules are available for each of the different AFI loudspeaker types, with two module bays required for bi-amplified speakers. The DLC24 Digital Loudspeaker Controller is a digital engine with an analog surface. It combines the most advanced technology available with intuitive interfaces to provide the key elements that ensure optimal loudspeaker system performance and management in a variety of live sound and fixed installation applications. The controllers provide factory-set equalization curves to smooth the response, protective limiting, and active crossovers (for bi-amplified models and subwoofers). Barrier strip inputs and outputs are standard on the AFI Controller.
12 dB/division
Hz (Frequency)
50 Spring Street, Ramsey, NJ 07446, USA Tel: 800-443-3979Fax: 800-999-9016 www.apogee-sound.com
150°
150°
150°
180°
180°
180°
330°
300°
270°
240°
210°
330°
300°
270°
240°
210°
330°
300°
270°
240°
210°
30°
30°
30°
30°
60°
90°
120°
150°
30°
60°
90°
120°
150°
30°
60°
90°
120°
150°
330°
300°
60°
90°
270°
120°
240°
210°
180°
63 Hz 125 Hz 250 Hz
330°
300°
60°
90°
270°
120°
240°
210°
180°
500 Hz 1,000 Hz 2,000 Hz
330°
300°
60°
90°
270°
120°
240°
210°
180°
4,000 Hz 8,000 Hz 16,000 Hz
180°
180°
180°
330°
300°
270°
240°
210°
330°
300°
270°
240°
210°
330°
300°
270°
240°
210°
30°
60°
90°
120°
150°
30°
60°
90°
120°
150°
30°
60°
90°
120°
150°
Loading...