STAINLESS STEEL & GLASS DESICCATORS
N2400008 REV. 2
Boekel Scientific
07/14
855 Pennsylvania Blvd.
Feasterville, PA 19053
t: 215-396-8200
f: 215-396-8264
PRODUCT INFORMATION
SETUP
Boekel’s line of Stainless Steel & Glass
Desiccators are designed as premium quality, air
tight, moisture proof cabinets. The desiccators
provide excellent storage environments for
materials and parts requiring storage at low
humidity. The glass and stainless steel
combination provides a sturdy stackable cabinet
which allows the user to see what is being stored
without opening the door and exposing the
material to room humidity. The cabinet door is
fully gasketed and comes with a very secure
latching mechanism.
Each Boekel desiccator comes with two shelves
and a single tray for holding desiccant. The
model 1340 has two 9 3/4” x 8” stainless steel
shelves, the model 1344 has two 19” x 13 1/2”
stainless steel shelves. Shelf separation on the
model 1344 is a minimum of 3/4”. All models
come with a manual relief valve installed on the
upper right side of the unit.
Optional additional shelving and replacement
door gaskets are available for all models.
CAUTION
Boekel’s Desiccators are not intended for the
purpose of maintaining a vacuum or pressure.
UNPACKING
1. Remove desiccator from carton.
2. Inspect for damage. Report all shipping
damage to the carrier immediately. Shipping
damages are covered by the carrier and
repair and/or replacement for shipping
damage must be coordinated through the
carrier.
3. Retain all packaging material in the event that
the unit must be returned.
4. Completely fill out and return the self
addressed Boekel Warranty Registration card
to Boekel Scientific.
Place the desiccator on a flat surface and install
the two shelves. Desiccator models 1340 and
1342 may be stacked up to four units high
without external bracing. Desiccator model 1344
may be stacked two units high without bracing.
Stacking may be limited by the total weight of the
objects to be stored in the desiccator.
CLEANING
1. The unit interior and exterior may be cleaned
with a damp cloth or sponge and warm water.
2. If an internal spill occurs, swab interior of unit
with a suitable bactericide or disinfectant.
3. When cleaning door, use a soft cloth and
water or mild detergent.
NOTE: Abrasive materials such as paper towels
may scratch door gasket. DO NOT USE
SOLVENTS.
SERVICE: RETURN AUTHORIZATION
REQUIRED.
Should service be required, contact your
salesperson or call Boekel Scientific at 215-3968200 or 800-336-6929.
SPECIFICATIONS
SMALL DESICCATOR
Models 1340 and 1342
Exterior: 12 1/2”W x 12 3/8”H x 12 3/8”D
LARGE DESICCATOR Model 1344
Exterior: 16 3/4”W x 22 1/4”H x 23”D
Maximum Temperature: 150°C
OPERATING INSTRUCTIONS
MODEL NUMBERS 1340, 1342 AND 1344
Loading...