This page intentionally left blank
General Information
Safety
Before you undertake any exercise program,
please be sure to consult with your doctor.
Frequent strenuous exercise should be
approved by your doctor and proper use
of your product is essential. Excessive or incorrect
training may result to health injuries. Please read
this manual carefully before commencing the
assembly of your product or starting to exercise.
• Please keep all children away from this item
when in use. Do not allow children to climb or
play on them when they are not in use.
• Supervise teenagers while they use this unit.
• For your own safety, always ensure that there
is at least 3 feet of free space in all directions
around your product while you are exercising.
• Regularly check to see that all nuts, bolts and
fittings are securely tightened. Periodically
check all moving parts for obvious signs of
wear or damage.
•
Any adjustment devices that could interfere with
the user's movement on this unit should not be
left projecting.
• Clean only with a damp cloth, do not use
solvent cleaners. If you are in any doubt, do
not use your product; contact CUSTOMER
SUPPORT.
• Before use, always ensure that your product
is positioned on a solid, flat surface. If
necessary, use a rubber mat underneath to
reduce the possibility of slipping.
Always wear appropriate clothing and
•
footwear such as training shoes when
exercising. Do not wear loose clothing that
could become caught in moving parts during
exercise.
• Do not use this unit if it is not functioning
properly or if it is not fully assembled.
• Do not use this unit for commercial purposes.
This unit is for home use only.
• Before use, you must read and understand all
instructions & warnings stated in this Owner’s
Manual as well as posted on the equipment.
• It is the facility owner’s responsibility to properly
instruct users on the proper operation of the
equipment and to warn them of the potential
hazards.
• If at any time during exercise you feel faint, dizzy
or experience pain, stop and consult your
physician.
Assembling Tools
- Ruler with both metric and English measurements
- 2 x Adjustable Wrenches
- 1 x Philips (”Crosshead”) Screw Driver
Weight Limit
Your product is suitable for users weighing:
300 pounds or less.
Storage and Use
Your product is intended for use in clean
dry conditions. You should avoid storage in
excessively cold or damp places as this may
lead to corrosion and other related problems.
Warranty
Body Flex Sports warrants your product for
a period of 1 year for the frame and 90 days
on all parts if the item is used for the intended
purpose, properly maintained and not used
commercially. Any alterations or incorrect
assembly of the product will void this warranty.
Proof of purchase must be presented for any
warranty validation (no exceptions). This
warranty applies to the original purchaser only
and is not transferable.
This warranty does not cover abuse or defects
caused during use, storage or assembly.
During the warranty period, Body Flex Sports
reserves the right to:
a). provide replacement parts to the
purchaser in an effort to repair the item.
b). repair the product returned to our
warehouse (at the purchaser’s cost).
c). replace the product if neither of the two
previously mentioned actions effect repair.
This warranty does not cover normal wear and
tear on upholstery.
Questions
If you have any questions concerning the
assembly of your item or if any parts are
missing, please DO NOT RETURN THE
ITEM TO THE STORE OR CONTACT THE
RETAILER. Our dedicated customer service
staff can help you with any questions you may
have regarding the assembly of this unit and
can also mail you replacement parts.
Customer Support
Customer Support is open 9:00 a.m. to 5:00
p.m. (Pacific Time) Monday through Friday.
Please contact us by any of the following
means.
Body Flex Sports, Inc.
21717 Ferrero Parkway, Walnut, CA 91789
Telephone: (888) 266 - 6789
Fax: (909) 598 - 6707
Email: info@bodyflexsports.com
BR 2710 Page 1
The following hardware is used to assemble your unit. Please take
PLEASE NOTE: some of these parts may have already been pre-assembled on your unit.
a moment to familiarize yourself with these items.
pre-assembled
#60
pre-assembled
pre-assembled
12
59. Special Washer
pre-assembled
BR 2710
Parts Listing
The following parts list describes all of the parts illustrated on the
exploded diagram on the following page. Please note, most of
these parts are already pre-assembled on your unit.
# Description # Description
1 Main Frame 29L/29R Left/Right Lower Handlebar
2 Rear
3 Adjustable End Cap 31 Front Post
4 Carr
5 Arc Washer (M8 R30.5) 33 Sp
6 Cap Nut (M8) 34 Comp
7 Front Stabilizer 35 Arc
8 End
9 Screw (M3x15 mm) 37 Bi
10L-1/10L-2 End Cap 38 Spring Washer (M8)
11R Left/Right Pedal Arm 39 Hex
11L/
12 Bushing (φ28xφ19x24.5) 40R
13 Big Washer (M10) 41 Sc
14 Nylon Nut (M10) 42 Washer (M5)
15 Plastic Spacer (φ31.8xφ19.2x36) 44 Water Bottle Holder
16 Nylon Nut (M8) 45 Water Bottle
17 Washer (M8) 46L/46R Left/Right Upper Handlebar
Stabilizer 30 Bo
iage Bolt (M8x73 mm) 32L
Cap 36 Carriage Bolt (M8x40 mm)
-1/32L-2 End Cap
-1/40R-2 End Cap
lt (M8x15 mm)
acer (φ32xφ19.2x67mm
uter
Washer (M8 R16)
g Washer (M8)
Bolt (M8x15 mm)
rew (M4x8 mm)
)
18L
/18R Left/Right Pedal 47 Fo
19 Hex Bolt (M8x45 mm) 48 End Cap
20 Screw (M4x20 mm) 49 St
21L-L/21L-R End Cap 50 Foam of Middle Handlebar
22 Hex Bolt (M8x75 mm) 51 Washer (M6)
23 End Cap 52a/52b Handle Pulse Wires
24a S
24b Sensor Wire (Middle) 54 Co
24c Sensor Wire (Upper) 55 Bo
25 Bushing (φ28xφ14x24) 56 Screw (M4x19 mm)
26 Spacer (φ14xφ8x59) 57 End Cap
27R-1/27R-2 End Cap 58 AC Adapter
28R-L/28R-R End Cap
ensor Wire (Lower) 53 Mi
59 Special Washer
60 Sc
am of Upper Handlebar
eel Plate of Handle Pulse
ddle Handlebar
ver of Handlebar
lt (M8x30 mm)
rew (M4x12 mm)
BR 2710
Page 3
The following diagram is provided to help you familiarize yourself with the parts and
hardware that will be used during the assembly process. Please note that not all of the
parts and hardware you see here will be used while you are assembling the machine
because some of these items are already pre-installed. Please continue to the next
page to begin the assembly process and use this page only as a reference guide for
parts and hardware.
Exploded Diagram
Page 4 BR 2710
Assembly Instructions
Stabilizer Assembly
Secure the Front Stabilizer (#7) and Rear
Stabilizer (#2) to the Main Fr am e (#1) by
using four Carriage Bol t s (#4), four Arc
Washers (#5) and four Cap Nuts (#6)
Hardware RequiredAsse mbly St e p 1
BR 2710
Page 5
Assembly Instructions
Asse mbly St e p 2 Hardware Required
Front Post Assembly:
A.
With the help of an assistant, connect the
Sensor Wire (Lower) (#24a) to the Sensor
Wire (Middle) (#24b).
B.
Secure the Front Post (#31) to the Main
Frame (#1) by using four Bolts (#30) and
four Washers (#17).
BR 2710
Page 6