Page 1
SM11
User Manual
SM11
Page 2
SM11 USER MANUAL
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions carefully
before connecting, operating or adjusting
this product. Please keep this manual for
future reference.
Surge protection device
recommended
This product contains sensitive electrical
components that may be damaged by
electrical spikes, surges, electric shock,
lightning strikes, etc. Use of surge protection
systems is highly recommended in order
to protect and extend the life of your
equipment.
Contents
Introduction 03
Features 03
Panel Descriptions 04
EDID Control 05
Mode DIP Switch Settings 06
Schematic Diagram - Embedding 07
Schematic Diagram - De-embedding 08
Specifications 09
Package Contents 09
Safety And
Performance Notice
Do not substitute or use any other power
supply other than the enclosed unit, or a
Blustream approved replacement.
Do not disassemble Blustream hardware
for any reason. Doing so will void the
manufacturer’s warranty.
Maintenance 09
Installer notes 10
02
www.blustream.co.uk
Page 3
SM11 USER MANUAL
Introduction
FEATURES:
• Can help to solve most HDMI, EDID, HDCP, compatibility, and handshaking issues
• Supports full HDMI 2.0 specification 4K UHD video (4K @ 60Hz 4:4:4)
• HDCP 2.2 compliant
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD
Master Audio transmission (HDMI pass through)
• Embed stereo analogue (L/R) audio using 3.5mm stereo jack input in place of source audio onto the HDMI output
signal path
• HDMI audio extracted to both analogue L/R audio and coaxial digital outputs concurrently
• Extract audio with or without a connected display - acts as an end-sink
• Supports HDR (High Dynamic Range) pass through
• Supports 3D signal display
• Advanced EDID management
Our SM11 HDMI Signal Manager has been designed to help solve HDMI
compatibility, HDCP2.2, clock stretching, EDID and handshaking issues that
are becoming common problems when distributing HDMI signals. The SM11
also features de-embedding or embedding audio within the HDMI signal path,
allowing you to breakout up to 7.1 channel audio signals. The SM11 supports
full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @
60Hz 4:4:4.
contact support@blustream.co.uk / support@blustream.com.au
03
Page 4
SM11 USER MANUAL
Front Panel
SM11
1 2 3
1 L/R analogue audio input - 3.5mm stereo jack
2 HDMI input indicator LED - lit when connected to a source
3 HDMI input - connect to a HDMI source
4 Power indicator LED - lit when unit is powered on
5 Power port - use supplied 5V 1A DC adaptor
Rear Panel
4
5
1
2
3 4
5 6
1 EDID DIP switch (UP=0, DOWN=1) - see page 5 for further details
2 Mode DIP switch - see page 5 for further details
3 HDMI output - connect to a HDMI display (unless using as an audio breakout only product)
4 HDMI link status LED - lit when connected to a HDMI display
5 Coaxial digial audio output (RCA)
6 Le/Right analogue audio output. De-embedded audio from the HDMI signal input. Note - source input must be
PCM 2ch audio for analogue audio outputs to work. The SM11 does not down-mix multi-channel audio signals.
04
www.blustream.co.uk
Page 5
SM11 USER MANUAL
EDID Control
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the
source to find out what audio and video resolutions are supported by the display, from this information the source will discover
what the best audio and video resolutions need to be outputted.
While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues do arise
when multiple displays or video matrix switching is introduced because of the increased number of variables.
By pre-determining the video resolution and audio format of the source and display device you can reduce the time needed for
EDID hand shaking thus making switching quicker and more reliable.
Configuration of extender EDID settings can be acheived using the product dip-switches on the end panel of the SM11.
Note: You must power cycle the product aer making EDID changes. For some sources it may be necessary to power cycle the
source aer EDID changes have been made for the source to update its video & audio output settings.
Global EDID Settings
Dip-switch position ‘0’ = O
Dip-switch position ‘1’ = On
DIP ON ▼/OFF▲ SWITCHING POSITIONS
3 2 1 0
OFF OFF OFF ON 1080p / 2ch
OFF OFF ON OFF 1080p / 5.1ch
OFF OFF ON ON 1080p / 7.1ch
OFF ON OFF OFF 1080i / 2ch
OFF ON OFF ON 1080i / 5.1ch
OFF ON ON OFF 1080i / 7.1ch
OFF ON ON ON 4K@60Hz 4:2:0 / 2ch
ON OFF OFF OFF 4K@60Hz 4:2:0 / 5.1ch
ON OFF OFF ON 4K@60Hz 4:2:0 / 7.1ch
ON OFF ON OFF 4K / 2ch
ON OFF ON ON 4K / 5.1ch
ON ON OFF OFF 4K / 7.1ch
ON ON OFF ON DVI 1280x1024
ON ON ON OFF DVI 1920x1080
ON ON ON ON DVI 1920x1200
OFF OFF OFF OFF Copy sink EDID
EDID TYPE
contact support@blustream.co.uk / support@blustream.com.au
05
Page 6
SM11 USER MANUAL
Mode DIP Switch Settings
The SM11 can be configured to perform various tasks using the MODE dip-switches. For details on each
setting please see below:
Note: You must power cycle the product aer making MODE changes.
Dip-switch 3 - Hotplug detect ON / OFF
When Hotplug detect is turned OFF the SM11 will use the HPD of the connected display on the HDMI output.
When Hotplug detect is turned ON the SM11 will complete the HPD back to the source connected to the HDMI input, no
longer requiring a HPD from a connected display.
Turning on HPD in the SM11 can be beneficial in 2 ways:-
1) Audio de-embedding is required but no display is available. The SM11 will act as the HDMI end-point completing the
necessary HDMI handshake, allowing the HDMI source to output a signal.
2) The SM11 will act as the HDMI end-point completing the necessary HDMI handshake which can help resolve any
handshake issues that may be associated with the display connected to the HDMI output of the SM11.
Position = 0 (up) - HPD (hot plug detect) o
Position = 1 (down) - HPD on
Dip-switch 2 - Audio embedding and de-embedding
The SM11 can be used to de-embed or embed audio to and from the HDMI signal.
Position = 0 (up) - audio de-embedding (audio extracted from the HDMI signal input)
Note - Source input must be PCM 2ch audio for analogue audio outputs to work. The SM11 does not down-mix
multi-channel audio signals
Position = 1 (down) - audio embedding (2CH L/R audio input added to the HDMI video out)
Dip-switch 1 - HDCP bypass or conversion
The SM11 can be used to help resolve HDCP issues.
Position = 0 (up) - HDCP management mode
Position = 1 (down) - HDCP bypass
Dip-switch 0:
Reserved / not in use - leave in ‘0’ position
06
www.blustream.co.uk
Page 7
SM11 USER MANUAL
1 SOURCE
DISPLAY
SM11
Front Back
Audio De-embedding
Example Schematic
SM11 -
contact support@blustream.co.uk / support@blustream.com.au
Analogue Audio
Digital Audio
HDMI
Speaker Cable
07
Page 8
SM11 USER MANUAL
Analogue Audio
HDMI
1 SOURCE
Example Schematic
SM11 -
Audio Embedding
Front Back
SM11
DISPLAY
08
www.blustream.co.uk
Page 9
Specifications
• Audio input connector: 1x analogue le/right audio (3.5mm stereo jack)
• Audio output connectors: 1x RCA (SPDIF) & 1x analogue le/right audio (3.5mm stereo jack)
• Video input connector: 1x HDMI Type A, 19-pin, female
• Video output connector: 1x HDMI Type A, 19-pin, female
• Mounting kit included
• Dimensions excl. connections (W x D x H ): 105mm x 87mm x 23mm
• Shipping weight: 0.5 kg
• Power: 5V / 1A DC, screw type connector
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
SM11 USER MANUAL
Package Contents
• 1 x SM11
• 1 x 5V / 1A DC power supply
• 1 x Mounting kit
• 1 x User manual
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
Components inside this unit are not user serviceable. Do not remove the protective cover from the unit. Removing
any panel from this product will invalidate the manufacturers warranty.
contact support@blustream.co.uk / support@blustream.com.au
09
Page 10
SM11 USER MANUAL
Installer notes:
10
www.blustream.co.uk
Page 11
www.blustream.co.uk
www.blustream.com.au
Loading...