Page 1
0
3 2 110
Mode
DC 5V
SC11HD-V2
User Manual
Link
HDMI Output L/R Out Upgrade
Power
L/R In
HDMI Input EDID
Coaxial
Out
Link
3 2 110
0
Page 2
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions carefully
before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
SC11HD-V2 USER MANUAL
Contents
Introduction 3
Features
3
Surge protection device
recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc. Use
of surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Safety And
Performance Notice
Do not substitute or use any other
power supply other than the enclosed
unit, or a Blustream approved
replacement.
Panel Descriptions
EDID Management
4
5
Mode Management
Application Diagram
Specifications
Package Contents
Maintenance
7
7
7
5
6
Do not disassemble either the
Transmitter or Receiver units for
any reason. Doing so will void the
manufacturer’s warranty.
02
www.blustream.co.uk
Page 3
SC11HD-V2 USER MANUAL
Introduction
FEATURES:
• HDMI 4K video scaler
• Supports 4K UHD video input (3840 x 2160 @30Hz 4:4:4 with HDR) 3840 x 2160 @ 50/60Hz 4:2:0)
• HDMI output will downscale 4K@24/25/30Hz 4:4:4 to 1080P@24/25/30Hz, and 4K@24/25/30/50/60Hz 4:2:0 to 1080P@ 24/25/30 /50/60Hz
• Supports 10-bit HDR10
• Can be configured to work as either a HDMI audio de-embedder or audio embedder
• HDMI audio de-embedded to both analogue L/R audio and coaxial digital outputs concurrently (2CH PCM only)
• Embed analogue L/R 2CH audio input onto HDMI output
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
• Advanced EDID management
• HDCP 2.2 support
• CECandARCpassthrough
Our Blustream SC11HD-V2 is a HDMI 4K scaler, designed for installations with multiple
displays that support dierent maximum video resolutions. The SC11HD-V2 is ideal for
installations with muliple output resolution requirements.
The SC11HD-V2 supports down-scaling of 4K video to 1080P and supports HDCP 2.2 with
advanced EDID management. It also features either de-embedding or embedding audio
within the HDMI signal path.
contact support@blustream.co.uk / support@blustream.com.au
03
Page 4
Front Panel
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 110
0
SC11HD-V2 USER MANUAL
1 2
0
3 2 110
Mode
HDMI Output L/R Out Upgrade
3 4 5 6
Link
Coaxial
Out
Connections:
1
MODE dip-switches - adjust the MODE setting for HDMI output - see page 5 for further details
2
HDMI output - connect to a HDMI display / end point
3
HDMI LED indicator - lit when there is an active HDMI connection to a display / end point
4
Le/Right Analogue Audio Output 3.5mm stereo jack - Extract audio from HDMI input source
NOTE: Source audio must be PCM 2 channel.
5
Coaxial Digital Output - used when audio is de-embedded from HDMI
6
Micro USB port - used for firmware upgrade only
Rear Panel
7 8
DC 5V
Power
L/R In
Connections:
7
Power connection – use supplied 5V 1A DC adaptor
8
Le/Right Analogue Audio Input
9
HDMI input - connecto to source device
q
HDMI LED indicator - lit when there is an active HDMI connection from source device
w
EDID dip-switches - adjust the EDID setting for source input - see page 5 for further details
9 11
10
Link
HDMI Input EDID
0
3 2 110
04
www.blustream.co.uk
Page 5
EDID Management
SC11HD-V2 USER MANUAL
EDID (Extended Display Identification Data) is a data
structure that is used between a display and a source.
This data is used by the source to find out what audio
and video resolutions are supported by the display then
from this information the source will determine what
the best resolution is to output.
While the objective of EDID is to make connecting
a digital display to a source a simple plug and play
procedure issues do arise when multiple displays or
video matrix switching is introduced because of the
increased number of variables.
The SC11HD-V2 will act as an ‘end point’ in the HDMI
signal path. Using the EDID dip-switches pre-determins
the video resolution and audio format of the source
regardless of the video output resolution that the
SC11HD-V2 scales to.
To change the EDID settings move the EDID dip-
switches as required on the front panel of the unit.
Please see adjacent table for settings.
Note: You must power-cycle the SC11HD-V2 aer
changes have been made in order for the EDID settings
to update.
3 2 1 0
Combination of DIP positions
0 0 0 0 Copy EDID from output
0 0 0 1 1080p 2.0ch
0 0 1 0 1080p 5.1ch
0 0 1 1 1080p 7.1ch
0 1 0 0 1080i 2.0ch
0 1 0 1 1080i 5.1ch
0 1 1 0 1080i 7.1ch
0 1 1 1 4K60Hz 4:2:0 2.0CH
1 0 0 0 4K60Hz 4:2:0 5.1CH,
1 0 0 1 4K60Hz 4:2:0 7.1CH
1 0 1 0 4K30Hz 4:4:4 2.0CH
1 0 1 1 4K30Hz 4:4:4 5.1CH
1 1 0 0 4K30Hz 4:4:4 7.1CH
1 1 0 1 DVI 1280x1024
1 1 1 0 DVI 1920x1080
1 1 1 1 DVI 1920x1200
EDID Type
Mode Management
3 2 1 0
Combination of DIP positions
1 x x 0 Always convert 4K formats to 1080P
0 x x 0 Auto convert 4K formats to 1080P when the device detects the display cannot support 4K
x 1 x 0 HDCP follows the source device
x 0 x 0 HDCP follows the display device
x x 1 0 Audio embed mode - embeds the analogue le/right audio onto the HDMI signal
x x 0 0 Audio bypass mode - allows HDMI audio to pass through
x x x 1 Mode control by serial USB
x x x 0 Mode control by DIP switch
Note: You must power-cycle the SC11HD-V2 aer changes have been made in order for the Mode settings to update.
The SC11HD-V2 cannot up-scale to 4K video formats.
Mode Settings
contact support@blustream.co.uk / support@blustream.com.au
05
Page 6
Example Schematic
SC11HD-V2
HDMI
Coaxial Digital Cable
Speaker Cable
Analogue Audio Cable
4K SOURCE
Non 4K Display
Down-scaled
video output
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In
HDMI Input EDID
Power
Link
3 2 1
1
0
0
SC11HD-V2 USER MANUAL
06
www.blustream.co.uk
Page 7
Specifications
Audio Input Connectors: 1x Analogue Le/Right audio (3.5mm stereo jack)
Audio Output Connectors: 1x RCA (SPDIF) & 1x Analogue Le/Right audio (3.5mm stereo jack)
Video Input Connectors: 1x HDMI Type A, 19-pin, female
Video Output Connectors: 1x HDMI Type A, 19-pin, female
EDID: 4-PIN DIP Switch
MODE: 4-PIN DIP Switch
Product upgrade: 1x Female Micro USB
Dimensions including connections (W x H x D): 83mm x 15mm x 83mm
Shipping Weight: 0.5kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: 5V/1A DC
SC11HD-V2 USER MANUAL
Package Contents:
• 1x SC11HD-V2
• 1x 5V/1A DC power supply
• 1x Mounting kit
• 1x Quick Reference Guide
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
contact support@blustream.co.uk / support@blustream.com.au
07
Page 8
www.blustream.co.uk
www.blustream.com.au
Loading...